The Starline A94 alarm belongs to a new family of security systems and was released in 2013. A special feature of the device is the built-in 2lin/2can module. Thanks to the telematic Kan-bus, signals are constantly transmitted between the various elements of the anti-theft complex, which increases the level of coordination and execution of service options. The model is available in two versions - the regular Starline A94 Dialog and Starline A94S. For the most part they have the same characteristics. In particular, both are equipped with the Dialogue encryption system, which prevents signal interception by intruders. In addition, both modifications have the same Slave mode and GPS module. The main difference is the ability to autostart the engine via a phone using the GSM module that the A94S is equipped with. Thanks to the latter, system control is possible even via SMS commands. Starline A91 does not start with the key.
Alarm equipment
The equipment of the Starline A94 car alarm is quite standard for modern models of this manufacturer. It includes elements such as:
- central control unit for the entire system with a processor;
- main console equipped with a liquid crystal screen and a two-way communication module,
- placed in a leather case;
- additional key fob without display and two-way communication;
- Valet service control button;
- signal transceiver with antenna module, placed on the front glass;
- LEDs for monitoring system status;
- siren button mounted on the hood of the vehicle;
- a set of wires for connecting all contacts of the anti-theft complex;
- engine blocking relay equipped with a block;
- motor temperature controller for setting automatic start;
- GSM module and SIM card for it;
- user manual and installation instructions from the manufacturer;
- documentation regarding the operation of the GSM module with detailed recommendations;
- User's note.
Some items may be purchased separately. The main thing is that they are compatible with the Starline A94 security system.
Specifications
The Starline A94 model operates on a radio carrier frequency in the range from 433.05 to 434.79 MHz. There are 128 radio channels for controlling the security complex. The main key fob operates within a radius of 0.8-2 km from the antenna.
The additional communicator operates at a distance of no more than 15 m.
Operating temperature range - -50…+85ºС. A 3-axis integral type accelerometer is used as a tilt and shock sensor. The supply voltage for the security system is 9-18 V. In security mode, the car alarm consumes no more than 23 mA of current. Similar models from the manufacturer are A94s, B94.
Equipment
Starline A94 delivery set:
- keychain with LCD display;
- additional communicator without screen;
- case for the main key fob;
- tilt and shock sensor;
- a device for receiving and transmitting a signal;
- led indicator;
- service button for controlling the system in emergency mode;
- engine blocking relay;
- wires and cables;
- temperature sensor;
- instructions for setting up the GSM module;
- SIM card;
- User's manual A 94.
Button combination
Starline A94 is controlled using buttons and their combinations. Most of them are located on two control panels, but in addition to them there is also a Valet service button. It is located inside the car and is used to activate the service mode, programming mode or emergency disablement of the security system.
As for the keys on key fobs, they are used for:
- turning on and off the security mode - short presses on the first and second, respectively;
- remote engine start - long-term impact on the first key;
- activating automatic winding by timer, alarm clock or temperature - using the cursor and the third button;
- activating silent security mode or deactivating it;
- setting the levels of the tilt and shock sensors - double pressing the second button;
- decontamination of a car engine.
To control the anti-theft complex options, short and long button presses, double clicks and combinations are used.
Problems and their solutions
If autostart does not work, most often this is due to incorrect immobilizer crawler settings. The control channel is configured as follows:
- With the ignition off, press the service button 5 times.
- The ignition is activated.
- AF will appear on the screen. Using button 3, you move to the inscription SF and enter the menu.
- Operating the 3rd key, you need to find function 13. Using the 1st button, it should be converted to the value 13-1 or 13-3 (depending on whether a turbo timer is used).
- The ignition turns off.
Alarm settings Starline A94
Starline A94 is configured using a control panel with two-way communication and a Valet service key. When installing and activating various options, it is important to follow the recommendations of the user manual.
Setting the time
The clock is set through the main menu of the main key fob. To enter it, press the fourth key and hold until a long melodic signal appears, and then two short ones. The time display will begin to flash and within 8 seconds you must begin changing it.
First of all, set the value of the current hour using keys 2 and 3. The first one to increase the value, and the last one to decrease it. After briefly pressing button 4, proceed to setting the minutes as described above.
After briefly pressing the fourth key, you can set an alarm to automatically warm up the engine. If there is no need to configure this option, immediately press the mentioned button for a long time or do not touch the key fob for 10 seconds. More details about the settings can be found in the video.
How to enable auto start alarm Starline A61
Setting the siren volume
You must first enter the main programming menu, for which, with the ignition off, press the Valet button five times and turn on the ignition. By pressing the second or third key of the key fob, select the SO UN item on the screen. After this, the third key is pressed sequentially until a sound signal is heard, and then briefly. The desired volume level is selected using keys number 2 and 3. To exit the main menu, turn off the ignition.
How to enable and disable modes
The Starline A94 car alarm boasts a number of useful service modes - anti-robbery, immobilizer, etc. Each of them has its own activation and deactivation rules. So, to activate the anti-robbery mode, with the engine running, press the first and third buttons of the key fob simultaneously, holding them until light and sound signals appear. Or, move the cursor over the corresponding icon and briefly press key three. As a result, the vibration mode of the key fob is also activated.
Disabling anti-robbery is possible only using the Valet service button. To do this, open the car door and enter a personal code with this key - pressing it a number of times equal to each number of the code.
The immobilizer mode is automatically activated if function No. 23 is configured. In this case, it is possible to install an immobilizer bypass or disable the engine lock. For the latter, place the cursor on the icon with the image of a horn and press key number two.
To adjust the sensitivity of the Starline A94 tilt sensor, use sequential pressing of the fourth button - first for a long time, and then for a short time. The desired value is set by short clicks on keys number 2 and 3. Exiting the mode is carried out in the same way as entering.
Setting up the shock sensor
The shock sensor in the Starline A94 anti-theft system can not only be turned off by levels, but also its sensitivity can be adjusted. To do this, first press button number 3 sequentially - the first time until a sound signal appears, and the second briefly. The appropriate sensitivity value is set using the second and third keys, the first of which is responsible for increasing it, and the last for decreasing it.
Setting up the turbo timer
The turbo timer mode is useful for vehicles equipped with a turbocharged engine. With its help, the engine stops working smoothly while the turbines reduce speed. To activate it, you can use one of two methods:
- directly in the salon;
- using the control panel.
In the first case, to turn on the tube timer, pull the parking brake lever before turning off the ignition. The option is activated automatically.
In the second case, first get out of the car, turn off the ignition and lock the doors. After this, using the third key, set the key fob screen cursor to the icon with the image of a siren and press key number two.
Confirmation of successful activation of the function will be:
- in the case of a car with an automatic transmission: continuous operation of the LEDs and a melodic sound signal from the key fob, the screen of which will begin to show the time remaining until the engine is completely turned off;
- in the case of a manual vehicle: a melodic sound signal from the main key fob and the appearance on its screen of a countdown until the power unit is turned off and the security mode is turned on.
The turbo timer option is disabled by hovering the cursor over the corresponding icon on the remote control display and selecting it with the second button.
How to start a car
The modern signaling system Starline A94 allows you to start the engine remotely. To do this, use the main control panel, which has two-way communication. There are two ways to activate this feature:
- use the cursor to select, after holding down the third key, the icon depicting a fan and confirm the selection by briefly pressing the same button;
- a combination of the first and third buttons - hold down the first one until a melodic sound appears, and then briefly click on the last one.
Confirmation of the success of the action will be a light and sound signal from the vehicle. After which, the door locks will automatically close and the security mode will be activated, and the power unit will begin to warm up. The key fob screen will show the operating status of the motor, preceded by a short sound.
How to turn off a car
In addition to remote engine start, remote engine shutdown is also allowed. The procedure generally resembles that used when activating the option. In the first option, use the cursor to select the fan icon and press the second key.
Factory reset on Starline A61
In the second, first hold down key number one until a melodic sound signal is heard, and then briefly click on the fourth. A sign of success will be the turn signals blinking four times, after which the engine will be deactivated. The security mode will remain in working order. Extending the operation of the motor is done by pressing the same icon with the third key.
How to check engine temperature
You can check the engine temperature status using only the main key fob, since only it has a screen. To do this, use a simple combination of successive presses on the first key. After this, the display will show the temperature sensor value.
Key lock
To lock the buttons of the Starline A94 main remote control, a combination of two keys is used - the second and fourth. Each is pressed simultaneously. As a result, after a sound signal, the word “BLOCK” will appear on the screen for a few seconds.
How to unlock Starline A94
To unblock the Starline A94 car alarm, simultaneously and briefly press keys number one and four. A short beep will sound as confirmation.
Emergency shutdown
For emergency emergency disabling of the security mode without using a key fob, you need to enter a personal security code, which you can either choose yourself or use the one set by the manufacturer by default.
The shutdown procedure looks like this:
- open the car doors with a key and leave them open;
- turn on the ignition;
- find the Valet service button and press it the number of times equal to the code digit;
- turn off the ignition.
If the code is unambiguous, the alarm will be turned off. If it is three-digit, then the procedure must be repeated for each subsequent digit.
Starline A94 team SMS
Thanks to the presence of a GSM module, the manufacturer allows the Starline A94 to be controlled by commands transmitted via SMS. The list of such commands is quite large and is entirely contained in the instructions for managing the complex. The main ones are:
- 10 — disabling security;
- 11 — activation of security mode;
- 16 and 17 - activation and deactivation of the security mode with automatic interruption of communication, respectively;
- 20 and 21 - turning off and turning on the motor, respectively;
- 50 and 51 - deactivation and activation of the service mode, respectively;
- 43 — receiving the coordinates of the car with a link to a site with online maps.
Commands are sent to the signaling module number in plain text.
How to find your personal code
The factory personal code for this family of alarms is always “3”.
Factory reset
You can reset the Starline A94 to factory settings, like other modern models of anti-theft systems from this manufacturer, using the Valet key and the main control panel. To do this, first turn on the ignition. Then, within a couple of tens of seconds, they find the service button and press it 10 times. Immediately after this, turn the ignition key to the off state and click on Jack one more time. Next, briefly press the first key of the main key fob. Wait up to a minute to exit reset mode.
Key fob functions
The functions of the main Starline A94 key fob include:
- time setting;
- alarm;
- silent mode.
3.1. How to set the time on Starline A94
To enter the function menu, you need to press button 4 for a long time until you hear first one and then 2 more beeps. The clock on the display will begin to flash. To increase the value, press key 2, to decrease, press key 3. To switch from hours to minutes, press key 4.
3.2. Setting an alarm
After setting the time, briefly press key 4 and use buttons 2 and 3 to set the clock. Then use key 4 again - you will go to the minutes. Use buttons 2 and 3 to set the alarm minutes. To switch the alarm clock on and off, press key 4. Its triggered signal is turned off by button 3.
3.3. Silent mode
To enable or disable the silent mode after setting the alarm, press key 4 again. To activate, press key 2, deactivate – 3.
Installation instructions
Starline A94 is a universal security system that can be equally easily installed on a VW Polo, Hyundai Solaris or a classic Lada. Installation begins with the installation of the central control unit. It is placed in a place inaccessible to strangers next to the dashboard, most often behind the trim. It is important to monitor humidity.
At the second stage, a siren is installed. Usually it is located under the hood, but at a distance from the power unit itself. Otherwise, it will quickly break due to high temperatures. The horn should be on its side or up.
Next, tilt and shock sensors are installed. They are placed in the vehicle interior. As for the temperature sensor, its place is on the pipe of the engine cooling system.
At the fourth stage, they begin to install the ignition lock relay, and the hood and door limit switches. The antenna with the unit is placed on the windshield, but at a sufficient distance from metal parts. Also in the area of the windshield, but in the cabin, LEDs are installed.
At the last stage, connect all the included wires. They must be laid under the casing.
Details can be found in the instructions in pdf format.
Performing an automatic start
Autostart for Starline a94 is possible using three different commands: by alarm clock, by engine temperature and at a certain frequency.
To warm up the engine using an alarm clock, you will need:
- Set the exact time on the key fob;
- Set alarm time;
- Turn on alarm
- Moving around the display using the fourth key, stop at the clock icon and press the third button.
To set the alarm time on Starline, hold down the fourth button, wait for three sound signals - 1 long, 2 short and press the same key twice more, 1 or 2 times depending on the choice of hours or minutes. Operate the second and third keys to change numeric values. Subsequently pressing the fourth button allows you to turn the alarm on or off by controlling the second or third keys, respectively.
The instructions state that illuminated clock and alarm icons become indicators of correctly performed actions.
Temperature-based autostart for Starline is possible after performing the following steps:
- Select the thermometer icon, as the instructions previously advised;
- Press the third button and use it to select the desired temperature, reaching which the machine will begin to warm up.
The temperature step is three degrees.
In order for the engine to warm up at a certain frequency, you will need to set the exact time. You can enable this feature by finding the clock icon and clicking on it with the third button, which also changes the period value in 2-hour increments when used again.
On the Starline a94 display this will be displayed in numerical and alphabetic values, where the first is the period, and the second is its decoding in hours. To cancel any automatic start option, return to the selected icons and press the second key.
Tired of paying fines? There is an exit! Forget about fines from cameras! An absolutely legal new product - Traffic Police Camera Jammer, hides your license plates from the cameras that are installed in all cities. More details at the link.
- Absolutely legal (Article 12.2);
- Hides from photo and video recording;
- Suitable for all cars;
- Works through the cigarette lighter connector;
- Does not cause interference to radios and cell phones.
Find out more Subscribe so you don't miss anything important
Are winter tires the most useless purchase this winter?
- I use last year’s 64%, 126 votes126 votes64%126 votes - 64% of all votes
- I agree, did you buy it yourself? 18%, 36 votes36 votes18%36 votes - 18% of all votes
- I don't know, is it worth it? all-season 13%, 26 votes26 votes13%26 votes - 13% of all votes
- Perhaps I didn’t buy it, saved? 5%, 9 votes9 votes5%9 votes - 5% of all votes
Total votes: 19704.02.2020× You or from your IP have already voted.
Content
The Starline A94 car alarm with auto start is one of the new generation anti-theft security systems. It features a high level of burglary protection, a wide range of functions and good reliability. There is an instruction manual for installing and configuring Starline A94.
Step-by-step operating instructions
Using all the functions of the Starline A94 alarm is quite simple, thanks to the detailed instructions for use supplied with the device. It and the user manual contain step-by-step instructions for installing or configuring the system. There are also clear tables from which you can not only find out what buttons 3 or 4 of the control panel are used for, but also how to correctly configure the necessary options using the Valet key. The instructions can be read online in pdf format.
4. Programming operating modes using the cursor method
The cursor control method assumes that the mode or function that can be turned on or off at the moment is determined by the icon on which the cursor is located. It consists of a flashing backlight of one of the labels on the key fob display. To select the desired mode, just move the cursor to the corresponding icon.
4.1. List of functions and modes activated by cursor
The Starline A94 key fob provides 12 modes and functions that can be activated using cursor methods.
Alarm repair Starline A94
Like any equipment, Starline A94 is susceptible to breakdowns and malfunctions. Some of them are evidenced by the errors mentioned above. So, if the motor does not work and error OS7 appears, then the problem may lie in an incorrectly configured engine winding control. If the system does not accept commands from the phone, then the breakdown should be looked for in the GSM module.
When the LED lights up and the power unit does not start, the problem may lie in damaged wires. Damage to the limit switches is indicated by the situation when the remote control does not close the doors or constantly shows that the hood is open. If the complex does not see the handbrake, then you should pay attention to the operation of the central unit. In most cases, fixing breakdowns does not require strong intervention in the elements of the device, but still, if it is needed, then you should buy only certified spare parts.
2. Liquid crystal display of key fob
The LCD display of the Starline A94 key fob displays general information about the safety of the car. You can find out what the interior and engine temperatures are, the current time, whether the alarm is on and much more.
2.1. Indication of modes and functions
All modes and functions are shown on the display in the form of various icons with pictograms. To fully use the alarm system, you need to understand what each of the labels means. Most of the icons match the labels that are typical for the Starline A9 key fob.
2.2. Indication of car alarm and vehicle status
The status of the alarm system and the car itself is also displayed in the form of icons. From them you can determine whether the security mode is on and which one (with a sound signal or silent), whether the door locks are open or closed, whether the ignition is on, etc. Depending on the state of the alarm and the car, certain icons appear on the display.
2.3. Displaying alarms on the key fob display
In a dangerous situation, the alarm sounds an alarm. Depending on what happened, certain icons appear on the display. From them you can understand which of the sensors was triggered, that the ignition was turned on, or whether the trunk, hood or doors were open.
Which is better: Starline A93 or A94
Despite their great similarity, Starline A93 and A94 are still completely different models with noticeable differences. The A94 boasts a built-in CAN adapter and the ability to use both key fobs as a tag for service mode. The A93 features a more modern processor and contactless, silent relays.
About car alarm Starline A61
In the battle Starline A93 vs Starline A94, the car owner should focus on the desired budget and his own preferences, since both models are quite modern.
Performing a remote start
Starline a94 allows you to launch from the key fob in two ways.
- Using the fourth key of the key fob, navigate through the service icons located around the perimeter of the display. Stop at the fan image and briefly press the third button;
- Hold down the first key on the key fob, wait for the beep, release, and then press the third.
In both cases, the engine started.
You can also remotely stop or, conversely, continue warming up. With Starline a94 this is done through the following manipulations.
The instructions say: to stop, you need to find the fan icon again and press the second button on it, or hold down the first key, hear a characteristic sound signal and, releasing it, press the fourth.
To extend the work, you will need to perform the same algorithm of actions as in the case of startup, as the instructions indicate.
