Replacing Renault Sandero engine coolant

The quality characteristics and level of coolant in the Renault Sandero crossover directly affect its operational efficiency, as well as the service life of the main vehicle systems. Therefore, in this article we will try to figure out what antifreeze to fill.

Selection of substance

As a coolant in Renault Sandero 1.6 cars, you need to fill in a substance of type D - GLACEOL RX. The liquid has a yellow color and medium viscosity. Also, in some Renault models, depending on the location of assembly, Cool Stream 4030 Premium coolant can be used as a replacement. In fact, hue in no way determines the characteristics or properties of a substance.

The total volume of the entire cooling system in Renault Sandero 1.6 cars, no matter what year of production they are, is 5.45 liters. There are marks on the expansion tank that can be used to determine how much substance is in the system. It is possible to purchase a concentrate for replacement and then dilute it with water. Catalog numbers of original substances for Renault Sandero cars with a 1.6 liter engine are 7711170545 and 7711170546.

This is interesting: Removing the Renault Duster fog light

2163-13-06a-04

We pour liquid into the engine cooling system through the expansion tank until liquid begins to flow out through the air bleeder fitting. We wrap the cap of the air release fitting and the cap of the expansion tank.

Let's start the engine. When the engine warms up, the outlet (lower) radiator hose should be cold for some time, and then quickly heat up, which will indicate the beginning of fluid circulation in a large circle. After waiting for the cooling system fan to turn on, stop the engine. After the engine has cooled, check the coolant level. If necessary, we bring it to normal.

The quality and required quantity of coolant in a Renault Sandero directly affects not only its performance, but also how long individual components and assemblies will last.

Liquid draining process

To remove the pipe, you need to pass a tight clamp. Please note that if there are clamps on the working hoses, you should replace them with new ones, because these elements are designed for one-time use only. Afterwards, the hose is carefully disconnected from the fitting and placed in a container. Next, the used antifreeze will flow simultaneously from two points: the radiator, the pipe. In order for the coolant to flow more actively, the cap of the expansion tank is removed, as well as the plug valve of the vertical fitting, located on a massive pipe, which goes to the body structure of the thermostat.

Coolant drain options

In the process of replacing antifreeze, it is necessary to completely remove the old composition and fill the system with a new one. For Renault Sandero, one of two methods of draining antifreeze is used: with or without engine removal.

The second method is mainly used; the coolant is removed through a plug on the cylinder block. This must be done carefully so as not to flood the generator. The rest drains through a hole in the bottom of the radiator.

With the engine removed, both plugs on the block and on the radiator are simultaneously unscrewed and the pipes are disconnected. When the antifreeze stops flowing, the system is purged with a compressor to remove any residue.

Preparing to replace antifreeze: important tips and tricks

For drivers of a car of this brand, it is better to replace the coolant in advance, namely when it becomes characteristically dirty-brown. In this case, the liquid will become unpleasant and smell sharp, and such changes will occur after 60 thousand kilometers.

To prepare for a simple operation to replace antifreeze, you will need several necessary items, including tools and consumables.

It is important to prepare several types of wrenches, among which there should be open-end and cap options. You should have pliers and a screwdriver on hand. To drain the waste liquid, you need to prepare a wide container with low sides, which would correspond to a volume of 6 liters. Many drivers use the neck of a plastic bottle as a funnel. It is necessary to stock up on rags and cloth or rubber gloves.

Undoubtedly, for convenience, you can use an inspection hole, since in the absence of one you will have to climb under the car and perform all the necessary manipulations while lying on the floor or ground. Before starting work, the engine must be completely cooled, and the valve located at the neck of the expansion tank must be unscrewed to reduce excess pressure in the cooling system. After the cover is removed, you will hear a characteristic sound, after which the cover should return to its place.

Unfortunately, Renault does not have any precautionary plugs or other devices for the release of used antifreeze, so it is drained after removing the system pipes. To begin, remove the lower hose from the radiator, unscrew and remove the tray protecting the crater, then place a container prepared in advance under the radiator. It is more convenient to carry out this work in an inspection hole, then you can throw a board over the hole and install a container on it to collect the waste product.

Step-by-step instructions for changing antifreeze in a car

Immediately before draining and replacing antifreeze in the Renault Sandero Stepway, it is necessary to prepare the car for the upcoming procedure. It is recommended to place the vehicle on a flat horizontal surface, without slopes or vertical elevations.

Important! According to the safety instructions, before changing the antifreeze in Renault Sandero Stepway, it is recommended to turn off the engine, let it cool and only then start working. The coolant heated when the engine is running remains in the expansion tank under high pressure. If the engine is not allowed to cool, a dense stream of antifreeze can burn the car owner's hands and face.

Next, you should take care of the appropriate tools. To change antifreeze in Renault Sandero Stepway you will need:

  • Pliers;
  • Key for 14 and 16;
  • Screwdriver;
  • Container for draining used antifreeze, with a capacity of at least 10 liters;
  • Absorbent rag fabric;
  • If necessary, additional replacement parts (pipes, valves, etc.).

The preparation procedure for changing antifreeze in a car’s cooling system usually takes no more than 1 hour. The process of replacing the coolant itself is divided into 3 stages sequentially:

  • Stage 1 - draining outdated coolant from the Renault Sandero Stepway cooling system: The drain container is installed under the expansion tank;
  • After the engine has cooled, carefully unscrew the drain tank cap. This is not recommended to be done abruptly due to the residual high pressure in the unit housing;
  • Allow the used coolant to drain into the prepared container. In this way, you can test for clogging in the drain - if the substance does not pour out freely, this means that the drain is severely clogged;
  • After draining used antifreeze, it is recommended to examine the contents of the drain container. If the technical fluid used is cloudy and has a pronounced sediment, this may indicate a corrosion process in the cooling system of the Renault Sandero Stepway;
  • Screw in the drain plugs and return the expansion tank to its original position;
  • Move the drain container under the vehicle cylinder block;
  • Drain used antifreeze from the cylinder block;
  • Stage 2 — flushing of system components. Flushing the system allows you to promptly detect a leak or malfunction in the elements of the cooling system. This procedure is especially necessary if the type of antifreeze is changed. When flushing the cooling system, not only the blockages are washed away, but also the protective layer formed by the old cooling substance. To avoid an unwanted chemical reaction between the active substances of antifreezes of different categories, it is recommended to wash off the previous protective layer. To flush the Renault Sandero Stepway cooling system, you can use distilled water or specialized flushing agents, which are also diluted with water in the proportions specified in the instructions for use. The flushing procedure before adding new antifreeze is as follows:
      The flushing solution or distilled water is poured into the expansion tank until the “Full” symbol appears;
  • The engine is started and left in working condition for 1-10 minutes;
  • The waste liquid is drained;
  • If the blockage is not completely washed out, the flushing can be repeated using only distilled water without any cleaning agents. It is important to remember that you should not use water from the water supply or nearby bodies of water for flushing, as this will only worsen the clogged drain;
    • Stage 3 - pouring fresh antifreeze. After the flushing has been completed, fresh coolant is poured into the expansion tank. It is important to note that if antifreeze concentrate is used as a coolant, it should be diluted with distilled water. The ratio of liquids depends on the desired boiling point of the substance and is indicated in the instructions for use of the concentrate. Then all the plugs are carefully screwed in, and final checks are made for the tightness of the cooling system, absence of leaks and defective parts.

    Renault Sandero cooling system

    In order to ensure a stable temperature of the operating power unit, the French Renault Sandero hatchback and its off-road version Sandero Stepway are equipped with a liquid-type power unit cooling system with forced circulation in a small and large circle.
    The protection of the motor from overheating and the ability to reach the required temperature depend on its performance. Technical, located in Kazan, provides professional, prompt and high-quality service to Sandero Stepway and Sandero, including diagnostics of the cooling system with subsequent repair or replacement of faulty parts and assemblies.

    Renault Sandero repairs are carried out using special tools and modern equipment. All Renault spare parts necessary for repairs are available in a wide range at the Renault store, located on the territory of the technical center.

    The store's assortment of original and non-original Renault Sandero spare parts is of consistently high quality at affordable prices.

    Specifics of cooling fluid

    The cooling system of the French hatchback is liquid; an expansion tank is installed to fill and top up coolant.

    The coolant used is a special antifreeze, the main element of which is ethylene glycol, does not freeze at a temperature of - 40.00 ° C, with anti-foaming and anti-corrosion special additives, including additives that prevent the formation of scale.

    Our technical center technicians strongly advise against pouring ordinary or distilled water into the cooling system; this reduces the efficiency of the system and can lead to its failure.

    Renault Sandero coolant is replaced every ninety thousand kilometers or after three years of intensive use, depending on which event occurs first. All work is carried out by car mechanics very carefully, since antifreeze is a toxic liquid and should not come into direct contact with the skin or inhale the resulting vapors. When diagnosing, much attention is paid to the tightness of the system in order to prevent vapors from entering directly into the cabin.

    Design features of the cooling system

    The cooling system of a French hatchback consists of several important components and parts, which include:

    • Renault Sandero cooling fan with an electric drive, in a casing with a guide diffuser and an impeller with six blades, asymmetrical, is additionally capable of turning on when the flow of oncoming air is extremely insufficient to cool the antifreeze of the radiator, for example, in the city, on mountain serpentines or when in hot weather, the engine ECU is responsible for turning it on;
    • the pump (pump) is of a centrifugal type, equipped with blades, driven by a timing belt, responsible for circulating the filled coolant directly in the system;
    • Sandero radiator for cooling heated liquid;
    • pipes and a whole set of hoses responsible for the transfer of antifreeze in the system;
    • thermostat, provides control of fluid movement along existing circuits (large and small, it all depends on the temperature of the antifreeze);
    • heater radiator connected to the cooling system;
    • expansion tank designed to compensate for the increase in the volume of antifreeze when heated and to top it up or replace it.

    One of the elements of the system is the cooling jacket of the power unit. The operating temperature of antifreeze in the cooling system of a French hatchback is in the range from 90.00°C to 100.00°C, it is maintained automatically using a thermostat. Overheating or, conversely, insufficient heating of the engine indicates that the thermostat needs to be replaced.

    The radiator with a horizontal circulation direction of the antifreeze flow has a tubular-tape inner core made of aluminum, two plastic tanks, a tank on the left with outlet and inlet pipes leading directly to the engine cooling jacket. Replacing the radiator, its prevention (cleaning the honeycombs of debris) and repairs, if possible, are services provided by the car mechanics of our technical center.

    The water pump is installed on the cylinder block; if it breaks (the seal is broken, the bearings fail), the pump is replaced. This unit is not repairable, so it must be replaced as an assembly.

    The expansion tank is made of translucent plastic, with “MIN” and “MAX” marks, which allows you to clearly control the existing level of antifreeze in the system, and is equipped with inlet and outlet valves.

    Jamming of the exhaust valve in the closed position can lead to a critical increase in pressure directly in the cooling system, its depressurization, failure of the radiator and overheating of the engine, so diagnostics are necessary and vital.

    Is the engine overheating or not reaching operating temperature, have you found any antifreeze leaks?

    Immediately contact the Technical Specialists, who work from morning (9:00) to evening (21:00) seven days a week, without days off or breaks.

    Price list for work for Renault Sandero cars*07/26/2016
    NamePrice
    1Changing the oil and oil filter0 rub.
    2Replacing the air filter176 RUR
    3Replacing the fuel filter200 rub
    4Replacing the cabin filter200 rub.
    5Replacing the fuel pump800 rub.
    6Replacing spark plugs 16 CL350 rub.
    7Replacing spark plugs 8 cl.200 rub.
    8Replacing antifreeze600 rub
    9Replacing brake fluid350 rub.
    10Replacement pump 8 cells2200 rub.
    11Replacement pump 16 cl3100 rub.
    12Replacing the 8 cl timing belt kit1600 rub.
    13Replacing a 16 cl timing belt kit2500 rub.
    14Replacing the accessory belt (alternator)400 rub
    15Replacing the ball joint600 rub
    16Replacing the front suspension arm825 RUR
    17Replacing the stabilizer link250 rub.
    18Replacing stabilizer bushings (per pair)500 rub
    19Replacing the front spring950rub
    20Replacing the front shock absorber950 rub.
    21Replacing the rear shock absorber480 rub.
    22Replacing the rear spring480 rub.
    23Replacing the thrust bearing950 rub.
    24Replacing the front wheel bearing1100 rub.
    25Replacing the rear wheel bearing700rub
    26Replacing the front brake pads350 rub.
    27Replacing rear brake pads700 rub
    28Replacing front brake discs500 rub
    29Replacement of rear brake drums (1 piece)200 rub
    30Replacing the steering rod (requires wheel alignment)400 rub
    31Replacing the steering tip (requires wheel alignment)385 rub.
    32Clutch replacement4500 rub.
    *The final calculation of the cost of work depends on the vehicle configuration and possible additional services related to the condition of the vehicle. To determine a more accurate total amount, please contact the Technical Manager.

    Other section materials

    Technical description
    dimensions
    Vehicle Specifications
    Vehicle registration details
    Location of controls
    Car keys
    Doors, central locking
    Ignition switch (lock)
    Automatic transmission selector lever
    Instrument cluster
    Adjusting the front seats and steering column
    Switches
    Heating control unit
    Front passenger airbag switch
    Steering column switches
    Headlight beam direction control
    Rear view mirrors
    Safety precautions during maintenance and repair
    Location of the main components and assemblies of the car
    Vehicle check
    Maintenance schedule
    Checking the condition of wheels and tires
    Checking the fluid level in the windshield washer reservoir
    Replacing windshield wiper blades
    Checking the engine oil level 1.4–1.6 (8V)
    Replacing engine oil and oil filter 1.4–1.6 (8V)
    Replacing engine spark plugs 1.4–1.6 (8V)
    Replacing the replacement element of the engine air filter 1.4–1.6 (8V) Renault Logan, Sandero
    Replacing the drive belt for engine auxiliary units 1.4–1.6 (8V) Renault Logan, Sandero
    Checking the condition of the engine gas distribution mechanism 1.4–1.6(8V)
    Topping up engine coolant 1.4–1.6 (8V)
    Replacing engine coolant 1.4–1.6 (8V)
    Checking the oil level in the 1.6 (16V) engine
    Changing the oil and oil filter of the 1.6 (16V) engine
    Replacing spark plugs for a 1.6 (16V) engine
    Replacing a replacement air filter element for a 1.6 (16V) Renault Sandero engine
    Replacing the drive belt for engine auxiliary units 1.6 (16V) Renault Logan, Sandero
    Replacing the timing belt of the 1.6 (16V) engine Renault Logan, Sandero
    Checking the level and adding engine coolant 1.6 (16V) Renault Logan, Sandero
    Replacing engine coolant 1.6 (16V)
    Checking the level and adding oil to a Renault Sandero manual transmission
    Checking the fluid level in the Renault Sandero brake system hydraulic reservoir
    Replacing fluid in the hydraulic brake system
    Bleeding the hydraulic brake system
    Checking the fluid level in the power steering reservoir Renault Logan, Sandero
    Checking the clutch release drive
    Checking the condition of the brake system
    Checking the condition of the chassis and transmission
    Checking the steering condition
    Checking the condition of the exhaust system

    This is interesting: Removing switches on the instrument panel console Renault Logan 2004-2009 Petrol

    Drain the old fluid

    The pipe in the Renault Logan is removed when the lock nut is first removed from the tightening clamp. Recommendation: if the hoses are secured with original Renault clamps, then they are replaced with new ones, since the old ones are disposable. Afterwards, the hose is twisted from the fitting and lowered into the container. The waste will drain in parallel from the pipe and the radiator. Then remove the cap of the expansion barrel and the plug from the vertical fitting located on the wide pipe fitting to the body of the thermostat. This is to increase the intensity of antifreeze drainage. And the coolant is replaced correctly and faster.

    Due to the design features of the Renault Logan cooling system, these actions will not allow all the coolant to drain. A certain amount of it will remain in the radiator of the interior heater. To completely drain the waste, the pipes are unlocked and the clamps are removed from the two hoses that go to the thermostat, and the tubes themselves are lowered into the drain container. Then the cooling system is purged using compressed air supplied through the neck of the expansion tank and the holes in the thermostat housing. The operation is performed carefully without excessive pressure. Otherwise, the honeycomb of the interior heater radiator may be deformed.

    After a certain time, during which the cooling system is completely empty, you can reinstall all components. All hoses are returned to their original places and secured with new clamps. Afterwards, new coolant is poured in, but which brand is decided by each individual. For some time, the Renault automaker filled the system with GLACELFAUTOSUPRA antifreeze from the TOTAL brand, painted in a bright yellow and pure yellow color spectrum. Since 2009, when antifreeze is replaced, GLACEOLRXTypeD, produced under the ELF brand, is poured into the system. It has a yellow tint, and before filling, the concentrate is diluted in a 1:1 ratio with distilled water for any volume. These two brands of antifreeze are characterized by excellent quality and are used for use on the French sedan Renault Logan with a 1.4 and 1.6 liter engine. They are purchased from the official Renault distributor. When replacing antifreeze, many are interested in the volume, it is within 5.5 liters, and the color of the liquid is determined through an Internet search. The outer packaging can be viewed in the corresponding video.

    • Crawl under your car, then you should unscrew the so-called engine protection and remove the inner shield. This shield protects the left side of the engine from dirt getting into it. After this, place a canister under the drain to collect the mixture.
    • Completely unscrew the drain plug of the engine cooling mechanism. Next, you need to unscrew the top part of the filler tank.
    • You can also partially unscrew the plug (if the pressure level drops, unscrew it entirely).
    • After draining the mixture from the radiator, screw everything back in as before. Loosen the compression force of the valve on the internal pipe, then drain the remaining mixture from the engine.
    • Using a pump or syringe, it is worth pumping out the old antifreeze from the expansion tank and pouring in fresh one.
    • Fill with fresh mixture until the mixture flows out. Next, simply close the lid.

    Towards the end of replacing the antifreeze, you should definitely turn on the engine of your Logan and let it warm up before starting work (which, in general, will make it possible to make sure that the cooling system is working correctly).

    After replacement, check the overall antifreeze level. If there is not enough antifreeze in the tank, bring it to the “F” mark.

    • If on a heated engine there is no warm flow from the internal heater, this may indicate the appearance of a water/air plug in the cooling system. If the air is a little warm when the engine is running, then the fan is faulty, but if it is cool, there is a plug in the coolant mixture.
    • Loosen the compression force of the valve on the internal radiator pipe, then unscrew it and drain the remaining mixture from the engine.

    As can be seen from the text above, replacing antifreeze in a Renault Logan 1.6 8-valve version is essentially a fairly simple procedure. Doing this work on your Logan yourself gives you new knowledge and allows you to save money on repairing your car. This is also an overall great opportunity to get to know your car and see it in a new light.

    The above instructions will allow the user to carry out re-solidification of antifreeze on their own without the help of people. Now you know how to do it. As a result, you also get the opportunity to save your money and, in the future, carry out this work more confidently.

    Stages of replacing coolant in Renault Sandero

    The procedure for replacing antifreeze is quite logical and understandable, although it has a number of nuances that are worth paying attention to. Unfortunately, the manufacturer did not provide drain taps for this task.

    Detailed instructions for replacing coolant, suitable for Renault Sandero and Stepway modifications with an engine capacity of 1.4 and 1.6 where 8 or 16 valves are used. Structurally, the cooling system and power plants are similar and do not have any significant differences.

    Coolant drain

    To carry out an operation to replace antifreeze, it is better to drive the car into a pit or overpass, as we described in the example of Logan, but this is not always possible. Therefore, we will consider the option of replacing it ourselves when there is no hole.

    It may not be strange, but doing this on the Renault Sandero Stepway is quite convenient; the car is very easy to maintain.

    Everything is easy to reach from the engine compartment. The only thing is that it will not be possible to remove the engine protection, because of this the liquid will splash heavily, hitting and flowing down it.

    So, let's figure out how to properly drain antifreeze:

    1. First of all, we remove the corrugation with the pipe so that subsequent operations can be performed more conveniently. One end just needs to be removed from the air filter housing. And the other end is attached behind the headlight; you need to feel the bulges on the pipe that hold it in place, press on them and remove them (Fig. 1);


      Fig.1 Corrugation with pipe

    2. unscrew the cap of the expansion tank to release excess pressure (Fig. 2);


      Fig.2 Expansion tank cap

    3. in the niche that opened after removing the air corrugation, at the bottom of the radiator, we find a thick hose. You need to remove the clamp from it and pull the hose up to remove it. The antifreeze will begin to drain; first, under this place we place a container for draining (Fig. 3);


      Fig.3 Thick hose

    4. To drain the old antifreeze more completely, simply remove the hose going to the thermostat (Fig. 4);


      Fig.4 Hose on thermostat

    5. On the hose going into the cabin we find the air vent and remove the cap from it. If you have a compressor, you can try to blow through the system through this hole; (Fig.5).


      Fig.5 Air vent cap

    Flushing the cooling system

    When replacing antifreeze, it is recommended to flush the cooling system; if the replacement is carried out according to regulated periods, then there is no need to use special chemicals. It is enough to run it 3-4 times with distilled water.

    To perform this operation, you can simply throw on the hoses without clamping them and warm up the car to the opening temperature of the thermostat. By the fourth time the water will be almost clean, you can start adding new antifreeze.

    Filling without air pockets

    After flushing the system and drying it as much as possible from distilled water, we proceed to the filling stage:

    1. put all the hoses in place, clamp them with clamps;
    2. through the expansion tank, we begin to fill the system with antifreeze;
    3. As it fills, air will come out through the vent hole, after which clear water will flow, some of which remains in the pipes after washing. As soon as the antifreeze flows, you can close the hole with a cap;
    4. add liquid to the level and close the expander.

    The main filling operation is completed, all that remains is to expel the air from the system. To do this, you need to start the car and periodically increase the speed to warm it up for 5-10 minutes. Next, unscrew the expander plug and normalize the pressure.

    We open the hole for the air to escape, slightly open the expansion tank, as soon as the air comes out, close everything. It is recommended to repeat all steps several times.

    You need to understand that when the car is warm, the coolant is very hot; you need to act carefully so as not to get burned.

    What to do if air gets into the cooling system?

    During the process of replacing antifreeze with Renault Sandero Stepway, air enters the vehicle's cooling system. Getting rid of excess air is not difficult, just follow the action plan below:

    • After filling in new antifreeze, start the car engine;
    • Leave the car idling for 10-15 minutes;
    • Stop the engine and examine the coolant readings. If the readings have decreased, add the missing amount of antifreeze.

    This procedure is called running the engine. As a result of the run, the air freely leaves the Renault Sandero Stepway cooling system, providing the vacuum necessary for normal engine operation. It is enough to carry out this procedure only 1 time.

    Timing for replacing coolant in Renault Sandero Stepway

    The time frame for replacing antifreeze in Renault Sandero Stepway varies from 1 to 5 years of mileage. The exact period depends on the individual characteristics of each individual vehicle and is necessarily indicated in the operating instructions for the vehicle of the brand in question.

    To fill the Renault Sandero Stepway cooling system you will need 5-5.5 liters of antifreeze, but it is recommended to stock up on 8-10 liters of coolant. This measure is due to the fact that when the car engine is running after filling, the antifreeze level may decrease and it will need to be topped up.

    Sequence of work

    A prerequisite for replacing antifreeze on a Renault Sandero is a cold engine. You also need to take care of personal protection. To do this, you can wear a respirator to prevent vapors from entering the respiratory system, gloves and glasses. The car must be on a horizontally level surface.

    Before starting work, you need to check all connections for possible leaks, including the connections between the hoses and the thermostat housing. If the tightening is not tight enough, it is necessary to replace the metal clamps.

    First you need to unscrew the cap of the expansion tank of the Renault car cooling system. Also, if there is engine crankcase protection, it must be removed. Then, using pliers, you need to loosen the clamp that secures the lower radiator hose of the car. The clamp is lowered along the length of the hose. At the next stage, you need to remove the hose from the radiator pipe and drain all the contents into a container that was prepared in advance. You must wait until the system is completely empty. After this, you need to tighten the valve plug, which is designed to release air. It is recommended to pour a little water through the expansion tank to flush the pipeline. Then, using a compressor, you need to blow out the remaining water from the system.

    Preliminary work before replacing antifreeze

    Before replacing antifreeze on Sandero, prepare a box with tools and additional accessories in advance.
    The list is as follows: a rag, tongs, a container for at least 10 liters and new coolant. Before you start draining the fluid, the Renault Sandero engine must be allowed to cool thoroughly. Personal protective equipment must be used. In this case, the following are suitable: a respirator, gloves, and safety glasses to prevent coolant from getting into your eyes. The machine is mounted on a flat horizontal surface.

    Before starting the replacement procedure, it is necessary to check the system for leaks, paying special attention to the fittings in the thermostat on the pipe fittings. If the tightening is weak, new clamps are installed.

    The filler cap of the expansion tank is unscrewed. If a casing is installed on the crankcase, it must be removed. Use pliers to loosen the clamp that secures the hose to the bottom of the car radiator. The clamp is pulled along the tube. Then we disconnect the rubber hose from the radiator and drain the antifreeze into a bath previously placed under the hose. We wait until the antifreeze remains in the system. Then the valve cap designed to release air is unscrewed. A certain amount of the substance is poured through the neck of the tank to flush the system. Then, increasing the pressure using a compressor unit, complete purging is performed.

    The hose going from below to the radiator is installed in its original position and securely fixed with a clamp. When removing the breather cap, new coolant is poured into the expansion tank. The update occurs until the antifreeze begins to come out of the valve, rather than out of the air. This is a signal that the tank cap and cap need to be tightened. The next step is to start the Renault Sandero engine to allow it to force the antifreeze through the system. You can replace antifreeze yourself without creating difficulties for the motorist.

    Replacement frequency, what antifreeze to fill

    The manufacturer recommends replacing the coolant after 90,000 kilometers or 3 years of operation. In most cases, this period is optimal, provided that you use the recommended antifreeze.

    If you fill in the original liquid, then it will of course be Renault Glaceol RX type D, code 7711428132 liter bottle. But if you can't find it, don't be upset.

    Renault Sandero can also be filled with other antifreezes from the factory, for example, Coolstream NRC, SINTEC S 12+ PREMIUM. It all depends on the place of production of the machine and the concluded supply contracts. Since it is expensive to transport “water” from abroad, it is cheaper to use what is produced by local enterprises.

    You shouldn’t save money and fill Sandero Stepway with antifreeze, especially since the savings won’t be significant.

    If we talk about analogues or substitutes, then any brand that has Type D approval recommended by the French automaker will do.

    Volume table

    How to select and replace coolant for Renault Sandero?

    Experienced motorists know that the quality of the coolant directly affects the performance of the engine. Therefore, attention should be paid to replacing this consumable item from time to time. Now we will tell you what kind of antifreeze you need to fill in for Renault Sandero, how often it should be done and how the process of changing the fluid takes place.

    Why do you need to replace antifreeze on a Renault Logan car and when to do it?

    A liquid that has used up its life changes its properties and can cause many negative aspects. It’s easy to determine the degree of its suitability - just open the filler cap of the tank and examine the contents. If the coolant has changed color or acquired a brown tint with sediment, this indicates the need for urgent rotation of the refrigerant.

    Based on the recommendations of the manufacturer, replacing the coolant with Renault Logan is carried out in the following cases:

    • After every 90,000 km .
    • Every 6 years of operation.

    The volume of the cooling system of a car with air conditioning is 5.45 liters , and without it – 4.5 liters. New chemical solutions make it possible to increase the interval to 100 - 110 thousand km, but in any case, visual inspection at least 2-3 times a year is necessary.

    Why is it important to change the coolant?

    Automotive fluids contain not only mixtures of ethylene glycol and monohydric alcohols, but also anti-corrosion additives. Depending on the type of corrosion inhibitors, coolants are divided into:

    • G-11 – based on silicate or nitrite additives.
    • G-12, G-12+ – based on carboxylic acids.
    • G-12++ – includes organics and mineral inhibitors.

    Mixing all types is not recommended, although the first two are, in principle, allowed. However, it should be taken into account that the service life of the coolant in this case is reduced. Why all these subtleties? The fact is that over time, the properties of chemical additives are lost, and ethylene glycol paired with water begins its corrosive activity. This threatens:

    • Possibility of thermostat jamming due to the presence of corrosion products.
    • Destruction of the water pump impeller.
    • Depressurization of pump bearings.
    • Clogged radiator and internal combustion engine channels.

    All of the above factors will certainly lead to overheating of the engine, resulting in excessive fuel consumption and a decrease in power. Regular overheating reduces the operational life of the power unit several times. Such consequences can be avoided by timely replacement of the antifreeze that has expired in full with Renault Logan. In addition, it is important to monitor its condition by periodically looking into the expansion tank.

    What do you need to prepare to perform the operation?

    To carry out the work, it is necessary to prepare the following tools and materials:

    • Set of open-end and spanner wrenches.
    • Set of screwdrivers and pliers.
    • Plastic funnel.
    • A capacity of at least 6-7 liters.
    • Gloves and overalls.
    • Coolant 6 liters.
    • Worm clamps.

    What antifreeze is needed for Renault Logan?

    Current Renault engines use type D fluid, which meets the G-12 standard:

    • Cool Stream 4030 Premium.
    • Glacelot RX (Type D).

    These brands are available for sale both in diluted and concentrated form, sold in liter canisters. Before pouring into the internal combustion engine, such a mixture is diluted with distilled water, usually in a 1:1 ratio, and the pour point is -36°C. Thus, Logan will need three liter containers.

    • Liqui Moly KFS 2001.
    • CoolStream Premium.
    • Aral 4003116908396 Silikatfre.
    • GlycoShell Longlife.
    • SWAG 60 ANTIFREEZE (Green).
    • Kuhlerschutz SF.

    Important! Even if it is not possible to purchase the right brand of auto fluid, you should add only carboxylate-type mixtures!

    What antifreeze to use for Renault Logan

    First, you should clearly understand the following rule: you should only pour coolant into a clean system. This will allow the new antifreeze not to lose all its qualities when mixed with a used product.

    Its chemical composition contains the substance ethylene glycol, distilled water and additives consisting of components such as an aqueous solution, glycerin and alcohol. Ethylene glycol and water are the basis of the liquid, which makes up 96 percent of the total volume, the rest is additives. They help combat corrosion in a wide range of radiator cooling systems, namely those made from cast iron, copper and aluminum.

    Before using the concentrate, it must be diluted with distilled water in a ratio of 50X50. And as a container for dilution, you can use plastic bottles of one and a half or two liters. The resistance to winter temperatures of the finished antifreeze inspires confidence; it does not freeze at -35.40 degrees below zero. By changing the dilution ratio, for example to 30x70, you can operate the car in different climatic zones.

    Antifreeze from the manufacturer Total is safe for plastic and rubber products, as well as for containers painted with paint or varnish. In order to completely fill Renault Logan with new coolant, it is necessary to prepare 608 liters of working product the day before, its quantity depends on the appetite of the engine. You can get this amount of antifreeze by purchasing at least 3-4 liters of concentrate. The remainder will be used for refilling during use of the car, so you should always have it in the trunk.

    Antifreeze type GLACEOL RX Type D costs from 330 to 350 rubles per liter, but it is advisable to purchase from trusted sellers or official dealers so as not to “run into” a fake. Distilled water is also sold in specialized auto stores and can be purchased without any problems.

    Replacement features

    Preparation

    What you need to prepare in order to cope with the process of changing the coolant as quickly and conveniently as possible:

    • the refrigerant itself;
    • clean rags;
    • container into which you will drain waste consumables;
    • pliers.

    Step-by-step instruction

    • The work of changing the coolant must be carried out on a cold engine. Therefore, let the engine cool down, after which you need to relieve the pressure in the cooling system. To do this, open the hood and find your expansion tank. Remove the lid from it: this will release the pressure.
    • Now you need to remove the engine protection. In Renault Sandero models, the developers did not provide holes for draining consumables in the engine and radiator. Therefore, place a previously prepared container under the radiator.
    • To begin the process of draining the antifreeze, you will need to disconnect the outlet pipe from the lower radiator hose, having previously removed the clamp securing it.
    • Disconnect the clamp: to do this, use a flat-head or Phillips screwdriver and unscrew the fastening screw.
    • Now you can remove the outlet pipe from the hose and drain the used consumables.
    • To increase the intensity of draining spent consumables, you can remove the fitting cap, which is installed on the coolant supply pipe to the heating device.
    • When the antifreeze has completely drained from the system, put the radiator hose outlet pipe back in place and secure it with a clamp. There is a possibility that the old clamp will not be suitable for reuse, so you will have to buy a new one. Instead of the standard clamp that was installed, you can use a worm clamp.
    • Now you need to pour coolant into the engine cooling system through the expansion tank. Pour in antifreeze until it begins to flow out of the air bleeder fitting. When this happens, replace the fitting cap. Also tighten the expansion tank cap.
    • Start the engine. When the engine warms up, the lower radiator hose should be cold for some time, after which it will quickly begin to heat up. This indicates that coolant circulation has begun in a large circle in the cooling system. When the system fan turns on and starts working, the motor must be turned off. When the engine has cooled down a bit, check the antifreeze level. If necessary, add consumables to the system.
    • It would also be a good idea to check the condition of the pipes and joints for leaks. If the liquid has just been filled, this is even easier to do: you will see the places where there is a leak immediately, since they will be highlighted with the color of the antifreeze being poured.

    2271-3-7-07-03

    Before replacement, you need to stock up on a worm-drive clamp for cooling system hoses with a working range of 35-50 mm. If the engine is hot, you need to let it cool and then relieve excess pressure in the cooling system by opening the expansion tank cap. We remove the protection of the power unit. The radiator and engine cylinder block do not have plugs for draining fluid. We place a wide container with a volume of at least 6 liters under the radiator. To reduce the intensity of liquid drainage at the initial moment, the cap of the expansion tank should be tightly screwed on.

    Leaks and problems

    When replacing coolant, you should pay attention to defects in the hoses; if there is the slightest doubt about their integrity, then you should take care of replacement.

    It is also advisable to inspect the expansion tank; it is not uncommon for the internal partition to simply dissolve over time and clog the cooling system with flakes of plastic particles. To search for and purchase a barrel, you can use the original number 7701470460 or take the analogue MEYLE 16142230000.

    The cover is also periodically changed, original 8200048024 or an analogue ASAM 30937, since the valves installed on it sometimes stick. Increased pressure is created and, as a result, leakage occurs, even in a seemingly serviceable system.

    There are cases of thermostat failure 8200772985, improper operation or gasket leakage.

    The clamps used in this Renault model also cause criticism from motorists.

    They come in two types: low-profile with a latch (Fig. A) and spring-spring (Fig. B). Low-profile with a latch, it is recommended to replace it with a regular worm-type one, since it is not always possible to clamp the original one without a special key. A diameter of 35-40 mm is suitable for replacement.

    You can try to put the spring-spring one in place using pliers, but this requires a little skill.

    Rating
    ( 2 ratings, average 5 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]