The wheels on the VAZ 2114 have a standard size of a relatively small radius - thirteen inches, while the rubber profile is quite high. This makes the appearance of the car not the most attractive. Therefore, many people think about changing wheels, taking rims with a larger diameter and tires with a lower profile height. In this article, we will try to figure out whether it is possible to install wheels of fourteenth and fifteenth diameters on a car without compromising its driving performance.
General information about wheels on the VAZ 2114
Firstly, we can say with confidence that fourteenth radius wheels can be installed on a VAZ 2114 car; this is directly stated in the car’s service book. At the same time, it is very important that the width of the rim lies between five and six inches, the offset of the rims is from thirty-five to forty millimeters.
The material from which the disk is made does not matter; what is much more important is the size of the mounting holes - ninety-eight millimeters, and the size of the central hole - fifty-eight and a half millimeters. But there is one trick here: if we take a wheel diameter larger than the standard one, the height of the rubber profile must be reduced by approximately the same amount. Otherwise, when turning, the wheels will touch the suspension and wheel arch liners.
Wheel rims VAZ 2106
The VAZ 2106 wheel rims were “inherited” from the VAZ 2103. Already at the “three ruble”, the designers came to the conclusion that they took the design and design nuances of the rims from Fiat. By the way, these same features were transferred to the “six”:
- rim width - five inches;
- exactly 16 round holes along the disk;
- offset 29 mm.
Over the years, caps were also installed on VAZ 2106 wheel rims to create an impressive appearance.
Both the caps and the entire outer side of the disc can be coated with chrome.
Disc sizes
The “Six” was equipped with wheels with a radius of R13 from the factory. Accordingly, they came with 175/70 tires.
However, tuning fans install larger rims on the VAZ 2106 - R14, R15 and even R16 . Structurally, the car is designed for this size of disks, however, it should be borne in mind that it will be more difficult for an inexperienced driver to drive a car with inappropriate disk sizes.
More information about tuning the VAZ 2106: https://bumper.guru/klassicheskie-modeli-vaz/tyuning/tyuning-vaz-2106.html
Types
Wheels for the VAZ 2106 are divided not only by size, but also by type:
- Stamped disks are the original (standard) equipment of all 2106 models, which are performed at the factory. Stamped discs are cheap to produce, have an average safety margin and are not difficult to use. However, if periodic anti-rust treatment is not carried out, such products can quickly lose their appearance.
- Alloy wheels are of higher quality, as they are made from ultra-light metal alloys. The appearance of such products is very attractive. However, if stamped discs last for decades with periodic painting, then cast ones very quickly become deformed even from minor damage.
- Forged wheels are currently considered the optimal equipment for cars, if we take the “price-quality” parameters as a basis. They are made on the basis of more durable stamped discs and are much less likely to fail.
Photo gallery: main types of disks
Standard products for all VAZ modifications
Attractive equipment that requires significant investment during repairs
Reliable and durable VAZ equipment elements
Today, in auto stores you can buy wheels for the VAZ 2106 of any type and size. Large stores also offer a large selection of product colors.
Video: review of wheels for VAZ classics
Number of holes in disks and their sizes
The front and rear axles of the VAZ 2106 have a strictly verified structure. Therefore, rims from other cars may not fit. Therefore, when choosing new rims, you should know what holes should be in them.
The standard AvtoVAZ disk has the following holes:
- for fastening the wheel itself - 4 x 98 with an M12*1.25 mm bolt;
- the diameter of the central hole for the nozzle is 58.1 mm;
- 16 holes for pad ventilation.
It is necessary to ensure that the mounting holes do not become loose, as in this case you will have to replace the entire disk
How to correctly calculate wheel parameters?
The wheels on the VAZ 2114 are the size that is suitable for the VAZ 2114 car, when installing rims of fourteenth diameter, the following tires are allowed: 175/65 R14 and 185/60 R14. It is worth noting that the second option is more preferable.
But there are different cases and options, so it’s worth understanding how to independently calculate whether the tires are suitable or not. This, for example, is important when installing 15-radius wheels.
So, in order to understand the mechanics of calculations, first let’s look at the rubber markings, or more precisely, what each number and symbol means. For example, let's take a standard VAZ 2114 tire: 175/70 R13.
- 175 is the width of the tire. The unit of measurement is millimeters.
- 70 – the height of the tire profile relative to its width. The unit of measurement is percentage. In our case, the following value is obtained: 175 * 0.7 = 122.5 millimeters.
- R13 = indicates that this tire is designed for a thirteenth wheel diameter.
Now let’s calculate the total diameter of the wheel, which is the sum of the tire profile height in millimeters and the wheel rim diameter in millimeters. First, let's convert inches to millimeters: 13 * 25.4 = 330 millimeters. Next, we calculate the total radius of the wheel: 330 + 122.5 * 2 = 575 millimeters.
We received a standard value for the total wheel diameter. Now you just need to calculate the diameter for each wheel rim plus tire option and select the appropriate combination. A difference of no more than two millimeters is allowed, otherwise there will be either too much gap or the wheel will catch.
In conclusion, I would like to note that fifteen-radius wheels have a pair with a fairly low tire profile, but problems may arise with passing the annual technical inspection of the car, since such a large wheel radius is not directly recommended by the VAZ 2114 manufacturer.
But if you still decide to take such a step, then you should pay attention to car tires marked 195/50 R15 and 185/55 R15. It is worth noting that in the first case, if possible, it is better to double-check whether the wheel will fit before buying a set of tires. The problem in this case may not be the height of the wheel, but its width.
Rails R16
An enlarged version of the 16-radius “rail” is used less frequently, to add style to the car. This option can hardly be called a version of wheels for every day, but due to their attractive appearance, wheels in this size are in demand.
The advantages of this “casting” kit are the same: reasonable price, strength, appearance. The disadvantages include only one point: reduced suspension efficiency. Otherwise, the 16th “rails” look great on high-quality low-profile tires.
The price for the enlarged “rail” version is 24 thousand rubles. A used version can be found for 17-20 thousand.
With everyday use, over time, the discs lose their appearance and peel off. If you wish, you can purchase an additional set of stamps and put on the stylish “rails” only in the warm season.
Select your year 2114 1.5i 2114x
The VAZ 2114 1.5i 2114x model was produced from 2001 to 2013. Table of factory and suitable tire sizes for VAZ 2114 1.5i 2114x. Save just in case so as not to lose!
| Make model modification Auto | Year of issue | Width, profile, tire radius | type of instalation |
| VAZ 2114 1.5i 2114x | 2013 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2012 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2011 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2010 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2009 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2008 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2007 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2006 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2005 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2004 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2003 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2002 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 2001 | 175/70 R13 | Factory |
| VAZ 2114 1.5i 2114x | 175/65 R14 | Acceptable | |
| VAZ 2114 1.5i 2114x | 185/60 R14 | Acceptable |
What does the size of tires and wheels affect?
Increasing disc diameter
| 5J, 5 1/2J, 6J | 35 | Increasing rim width | Increasing tire width |
| Car style | will improve | will improve | will improve |
| Road holding | will improve | will improve | will improve |
| Steering precision | will improve | will improve | will improve |
| Tire grip | Will not change | Will not change | will improve, but only on dry roads |
| Resistance to hydroplaning | Will not change | Will not change | will get worse |
| Comfort on rough roads | will get worse | Will not change | will improve |
| Road noise | Will not change | Will not change | will intensify |
| Gasoline consumption | Will not change | will increase | will increase |
| Tire wear | Will not change | Will not change | will increase |
It is worth noting that it is better to choose winter tires for the Lada Grant as narrow as possible. Thus, the pressure of the car on the road surface will be greater, and therefore the grip on the road will improve. Also, do not forget that wide tires are more sensitive to the ruts on the road, and low-profile tires will transfer even the smallest bumps to your butt.
What is the tire pressure
The manufacturer provides a tire pressure of 1.9 bar for the basic wheel configuration (R13), and 2 bar for 14-inch wheels. In practice, for a given car model, 2 bars are always inflated. Below is a table from the car's passport.
**Rim offset (ET) is the distance from the mating plane of the disc to the middle of the rim.
On each tire, in addition to the markings, the permissible pressure limits are indicated. However, over-inflating the tire will reduce its shock-absorbing capabilities and reduce ride comfort. Low pressure will accelerate tire wear.
Rails R17
Interesting : Large selection of photos under the hood of the VAZ 2114
The most “hardcore” version of the “rail” on the VAZ is available in size 17. The 17th wheel radius gives the look of any 14th model car. Even if the body is not in the best condition, the 17th casting gives it a special style.
Wheels of this size have one plus - a bright appearance. Otherwise, the following disadvantages are observed during operation: the fender liners clinging when the steering wheel is turned too much, the suspension travels hard, and the steering wheel is difficult to rotate.
The R17 option is worth considering for purchase by fans of style. The price of the new set is more than 36 thousand rubles. The used option should be examined in detail before purchasing.
Due to the large size, there is a possibility of dents on the edge. It's expensive to level this size, so it's worth considering purchasing a new set.
The standard wheels on the “four” can also look good, but the car gets a really beautiful look after “re-shoeing” with larger wheels. Options in the “rails” style are in demand among many owners of the “four”, so this article will be useful for everyone who wants to decorate their car.
Unwelding.
The fact is that some ten years ago, when there was no such choice in terms of wheels and tires for the VAZ 2106, car enthusiasts made homemade (boiled) wheels. All Lada models lend themselves best to this type of tuning. Of course, they put boiled wheels on other car models, but we’re talking specifically about putting big wheels on a VAZ 2106. So. Unwelding is a disc with an increased rim width. Standard wheels have a width from 5J to 6.5J. Using welding, you can increase the thickness to 7j 8j and 10j. Along the way, a problem may arise that such tuned wheels will not fit into the wheel arches, especially if there are fender liners. However, many car enthusiasts know that this is not a problem; they can be rolled out or cut.
There are two ways to boil the disc:
— Welding a steel strip into the middle of the disk. — Welding two disks cut to width.
Please note, however, that only steel (stamped) discs are suitable for such operations. Alloy wheels may not withstand heat treatment and may crack. One more feature. When changing the rim width in order to fit larger wheels on a VAZ 2106, it is necessary to use non-standard tires. For example, you installed boiled 13-inch wheels, then you need to choose tires with a diameter of 14 inches; if the wheels are 14 inches, then install 15-inch tires accordingly. The wheels must be pumped 0.2-0.3 atmospheres less than normal. This creates the effect of a flat tire. The rubber “swallows” all small pebbles and pits, and as a result reduces the load on the axle and wheel bearing. Next, toe the front wheels minus 1 mm at the front, at which the wheels seem to be trying to converge. This will protect the front bearings from twisting and extend their service life.
I consider this type of tuning to be the most acceptable for VAZ 2106 owners. It does not require significant financial investments into our cars. Moreover, they already belong to the budget class. So why should we pay more?
Features of winter tires for cars
Many people believe that the difference between tires designed for different seasons comes down to the tread, namely its design. This is partly true; the tread pattern of winter tires is different from that of summer tires. However, the main difference lies not in the tread, but in the rubber composition itself.
The fact is that at negative temperatures, rubber changes its properties - it becomes hard, while the quality of the grip of the “hardened” rubber decreases. In winter tires, the composition has been changed so that it remains soft even at low temperatures.
But this condition also has a negative role - such rubber becomes even softer at positive temperatures, which leads to the fact that driving the car becomes more difficult, it begins to float a little on the road. Additionally, winter tires are often equipped with metal studs to improve wheel traction on snow and ice.
However, not all winter tires...
equipped with spikes - another type of stingray is produced, without spikes. Popularly, such tires are called “Velcro” or “cobwebs”. The fine, specially applied tread of these tires provides reliable grip on winter roads even without the use of studs.
All-season tires, which are supposedly designed for both summer and winter cold, are also popular among people. This is not an entirely correct judgment; rather, these are tires for the autumn-spring period, since in summer they are not hard enough, and in winter they do not have the required softness.
So you shouldn’t take any chances, and in winter use only tires designed for this period.
So, now the market offers a large number of winter tires for cars, including for our automobile industry; winter tires are sold for VAZ classics, as well as the new generation - 21099, 2110-2114.
Related link:
Differential lock on VAZ
One of the significant conditions...
When choosing winter tires for a VAZ, the “wallet size” factor is considered. After all, a lot of companies, both domestic and foreign, are engaged in the production of tires.
But this criterion also has one underlying reason - often tires from European manufacturers are designed for their winters, where the temperature is higher than ours. As a result, expensive tires can perform much worse on the highway than inexpensive domestic ones.
To say unequivocally which winter tires are better for classics and which for other models -
impossible, since each driver has his own opinion. Some people like Nokan Hakkapeliitta, which are considered one of the best, while others are content with the domestic Rosava, and consider the tires of this manufacturer to be quite good. You can also note such companies as Hankook and Bridgestone, they also have tires that can be installed on VAZ. But in general, it all depends on the money available, as well as on certain preferences - “studded” or “Velcro”, with a symmetrical or directional pattern.
