VAZ 2112 (Lada): photos, video test drive and technical specifications

Cloning of models of the 10th generation of VAZ cars began literally immediately after the start of their mass production. In 2012 he was born VAZ 2112, which outwardly was strikingly different from the “ten” that had become familiar on the roads, but in its internal filling it almost completely repeated it.

Photo Lada 2112

Technical characteristics of the VAZ 2110,2111, 2112 engine

The engine was installed on such popular AvtoVAZ models as VAZ-2110, VAZ-2111 and VAZ-2112.

1. Displacement - 1499 cc.
2. Number of cylinders - 4 pcs.
3. Number of valves - 16 pcs.
4. Maximum power - 93 hp/5600 rpm.
5. Maximum torque - 128 Nm/3700 ​​rpm.
6. Maximum engine power is 93 hp.
7. Compression ratio – 10.5
8. Gasoline octane number - 95
9. Environmental standards - Euro 3
10. Acceleration 0 - 100 km/h - 11.9 seconds.
11. Combined cycle consumption - 7.2 L/100 km
12. Engine life - 200 - 250 thousand km.
13. Valves - oppression

Story

The production of this model began 4 years after the launch of the VAZ 2110 sedan, that is, in 1999. The car sold quite successfully, and in 2006 a small restyling was carried out, the changes affected only the interior, and then the steering wheel was replaced and a dashboard from Lada Priora was installed.

In 2008, production was curtailed due to the same Priora, but this model, unlike the VAZ 2110 and VAZ 2111, did not go into production at the Bogdan auto company in Ukraine.

The model is a car that handles better than the sedan, the body is to blame here, it allowed the car to become more rigid and take corners better. The coupe version has an even more brutal body at the rear, and some corner enthusiasts install a strut on the A-pillars, resulting in the car becoming even better to drive.

Technical characteristics of the VAZ 21114 and 11183 engine

The engine was installed on such popular AvtoVAZ models as Lada Kalina, VAZ 2108, 21083, 2109, 21093, 21099, 2113, 2114, 2115, 2110, 2111, 2112.

1. Displacement - 1596 cc.
2. Number of cylinders - 4 pcs.
3. Number of valves - 8 pcs.
4. Maximum power - 81 hp / 5200 rpm.
5. Maximum torque - 125 Nm/3000 rpm.
6. Maximum engine power - 81 hp.
7. Compression ratio – 9.6
8. Gasoline octane number - 92.95
9. Environmental standards - Euro 2,3,4
10. Acceleration 0 - 100 km/h - 12.9 seconds.
11. Combined cycle consumption - 7.6 L/100 km
12. Engine life - 150 - 250 thousand km.
13. Valve - no bending

Interior

Inside, it remains the same VAZ 2110, but there are still some differences, for example, that above the air deflectors there are various buttons that turn on the dimensions and so on.

Also, the hatchback does not have an air direction lever, instead it is just a piece of plastic. Some versions of the car had electric windows.

In all other respects, the interior remains the same.

There’s not much to say about this car, since it’s still the same top ten. Whether to buy it or not is entirely your choice. If you are a young guy with little money and a desire to buy this car for yourself, then this will be a good option, but the problems with the VAZ 2112 will be the same as with the top ten and you will have to deal with them.

Technical characteristics of the VAZ 21116 and 11186 engine

The engine was installed on such popular AvtoVAZ models as Lada Granta, Lada Kalina 2.

1. Displacement - 1596 cc.
2. Number of cylinders - 4 pcs.
3. Number of valves - 8 pcs.
4. Maximum power - 87 hp/5100 rpm.
5. Maximum torque - 140 Nm/3800 rpm.
6. Maximum engine power - 87 hp.
7. Compression ratio – 10.5
8. Gasoline octane number - 95
9. Environmental standards - Euro 4
10. Acceleration 0 - 100 km/h - 10.9 seconds.
11. Combined cycle consumption - 7.2 L/100 km
12. Engine life - 200 - 250 thousand km.
13. Valve - no bending

Installation features

As a rule, for a professional, such work can take a day, maximum two, if all the necessary components are available. Often, drivers choose a motor for installation that has been in use for some time. In this case, it is necessary to approach its purchase extremely responsibly. Such an engine is rebuilt and all its components are checked, since in the future this will affect the functions immediately after its installation in the car.

Technical characteristics of the VAZ 21214 engine

The engine was installed on such popular AvtoVAZ models as Chevrolet Niva and LADA 4×4.

1. Working volume - 1690 cc.
2. Number of cylinders - 4 pcs.
3. Number of valves - 8 pcs.
4. Maximum power - 81 hp/5200 rpm.
5. Maximum torque - 125 Nm/3000 rpm.
6. Maximum engine power - 81 hp.
7. Compression ratio – 9.4
8. Octane number of gasoline - 92.95
9. Environmental standards - Euro 4
10. Acceleration 0 - 100 km/h - 12.9 seconds.
11. Combined cycle consumption - 10.5 L/100 km
12. Engine life - 100 - 150 thousand km.
13. Valve - no bending

Start of preparatory work

Preparations for installation should begin by dismantling the flywheel of the new power unit. Its teeth will be incorrectly positioned in relation to the starter gear. It is necessary to purchase a suitable crown and place it on the flywheel.

It must be taken into account that the Chevrolet Niva with the Priora engine is modified only in the engine part. The gearbox remains unchanged, so care should be taken to ensure reliable and correct joining of these two blocks. It is optimal to carry out this operation using a special adapter plate. You can buy a ready-made element or make it to order. An alternative to connecting the gearbox and engine would be to fix the engine cylinder block directly to the gearbox. In this case, only three mounting bolts will be involved. Many car enthusiasts who have tested this in practice claim that the clutch is quite reliable.

Technical characteristics of the VAZ 21124 engine

The engine was installed on such popular AvtoVAZ models as VAZ-2110, VAZ-2111 and VAZ-2112.

1. Displacement - 1599 cc.
2. Number of cylinders - 4 pcs.
3. Number of valves - 16 pcs.
4. Maximum power - 89 hp/5000 rpm.
5. Maximum torque - 131 Nm/3700 ​​rpm.
6. Maximum engine power is 89 hp.
7. Compression ratio – 10.3
8. Gasoline octane number - 95
9. Environmental standards - Euro 4
10. Acceleration 0 - 100 km/h - 10.7 seconds.
11. Combined cycle consumption - 7.5 L/100 km
12. Engine life - 200 - 250 thousand km.
13. Valve - no bending

Interesting on the site: VAZ 2107 injector

Weak spots

There are not many weaknesses in the VAZ-21120, but they are quite serious. Imperfect electrics caused such malfunctions as engine tripping, unstable idling, frequent failure of various sensors, etc.

There are problems with hydraulic compensators. Sometimes main or connecting rod bearings fail prematurely.

Sometimes the car owner simply gets sick of the increased vibration.

A broken timing belt is dangerous for the valves.

In most cases, the occurrence of a malfunction requires careful diagnosis at a car service center.

Technical characteristics of the VAZ 21126 engine

The engine was installed on such popular AvtoVAZ models as Priora, Granta, Kalina 2.

1. Displacement - 1597 cc.
2. Number of cylinders - 4 pcs.
3. Number of valves - 16 pcs.
4. Maximum power - 98 hp/5600 rpm.
5. Maximum torque - 145 Nm/4000 rpm.
6. Maximum engine power is 98 hp.
7. Compression ratio – 11
8. Gasoline octane number - 95
9. Environmental standards - Euro 4
10. Acceleration 0 - 100 km/h - 10.1 seconds.
11. Combined cycle consumption - 7.2 L/100 km
12. Engine life - 200 - 300 thousand km.
13. Valves - oppression

Owner reviews

The best recommendations can be given by the direct owners of the model in question, who have tested the car in various weather and road conditions. If you take a Chevrolet Niva with an engine from a Priora, reviews from owners indicate that the car has changed for the better. Special benefits include the following:

• the power unit has a solid reserve before major overhaul;
• fuel consumption has decreased, quite noticeably;
• high speed characteristics and power;
• reliability of the unit;
• high performance characteristics of the motor.

It’s not difficult to create a Niva-Chevrolet with an engine from a Priora. Some modifications to the cooling system and the seat for the unit will be required. All manipulations can be completed in just a couple of days.

The disadvantages of the device in question include one point that was noticed by some owners and specialists. If the timing belt breaks, the pistons inevitably interact with the valves, causing the latter to bend. To avoid this, you can purchase special pistons with recesses for the valves.

Technical characteristics of the VAZ 21128 engine

The engine was installed on such popular AvtoVAZ models as VAZ 21104, Lada 2112 Coupe 1.8, Lada Priora 1.8

1. Working volume - 1796 cc.
2. Number of cylinders - 4 pcs.
3. Number of valves - 16 pcs.
4. Maximum power - 98 hp. /5200 rpm
5. Maximum torque - 162 Nm/3200 rpm.
6. Maximum engine power is 98 hp.
7. Compression ratio – 10.5
8. Gasoline octane number - 95
9. Environmental standards - Euro 4
10. Acceleration 0 - 100 km/h - 9.8 seconds.
11. Combined cycle consumption - 7.5 L/100 km
12. Engine life - 100 - 150 thousand km.
13. Valves - oppression

There is also an interesting article on the site about the boxer engine

Technical characteristics of the Lada Granta Sport 120 hp engine.

1. Displacement - 1597 cc.
2. Number of cylinders - 4 pcs.
3. Number of valves - 16 pcs.
4. Maximum power - 118 hp/5900 rpm.
5. Maximum torque - 154 Nm/4740 rpm.
6. Maximum engine power is 118 hp.
7. Compression ratio – 11
8. Gasoline octane number - 95
9. Environmental standards - Euro 4
10. Acceleration 0 - 100 km/h - 9.3 seconds.
11. Combined cycle consumption - 7.8 L/100 km
12. Engine life - 250 - 300 thousand km.
13. Valves - oppression

Pros of disassembling a cornfield

The advantage of carrying out manipulations with disassembling parts will allow you to monitor the general condition of the car and avoid sudden breakdowns. This is especially important when some components are created independently. For example, when changing the pan, it is necessary to pay special attention to the safety of the oil. Moreover, all the necessary fastenings are created independently, which, with the right approach, ensures an ideal combination of car elements.

Technical characteristics of the VAZ 21129 engine

The engine is installed on such popular AvtoVAZ models as the VAZ 2180

1. Displacement - 1599 cc.
2. Number of cylinders - 4 pcs.
3. Number of valves - 16 pcs.
4. Maximum power - 106 hp. /4800 rpm
5. Maximum torque - 148 Nm/4000 rpm.
6. Maximum engine power - 106 hp.
7. Compression ratio – 11
8. Gasoline octane number - 95
9. Environmental standards - Euro 4
10. Acceleration 0 - 100 km/h - 9.6 seconds.
11. Combined cycle consumption - 7.2 L/100 km
12. Engine life is 250 thousand km.
13. Valves - oppression

Installation of the power unit

Having completed all the preparatory work, you can begin installing the motor. For a professional repairman, this process rarely takes more than one day. Personal participation will require more time and effort.

The greatest amount of work will have to be done with the modification of the cooling and exhaust systems. An old manifold from a VAZ of early production will not fit the “Prior” engine, as well as connecting pipes and some elements of the cooling system. It is difficult to purchase the parts in question ready-made, but they can be made to order or using gas welding.

The fitting of the products in question is carried out after the new power unit with the cylinder block is installed on the cushions. Experts recommend moving the neck for pouring oil into the engine, since it rests against the partition, which complicates the process of filling the mixture and installing the valve cover.