Mazda 6 GG fuses: where are the blocks, fuse diagrams for the Mazda 6, fuel pump, washer

Mazda 6 gg (1st generation) was produced in 2002, 2003, 2004, 2005, 2006, 2007 and 2008. During this time, the model was restyled. Delivered all over the world. In China and Japan it is known as Mazda Atenza.

In this publication you will find a description of fuses and relays of the Mazda 6 gg with block diagrams and photos - examples of execution. Let's highlight the cigarette lighter fuse.

The design of the blocks and the purpose of their elements may differ and depend on the year of manufacture, region of delivery (USA, Europe, etc.) and level of equipment.

Mazda 6 GG fuse diagram under the hood

First, let’s clarify where the block with the protective elements of the Mazda 6 GG electrical network is located in the engine compartment.

Mazda 6 GG fuses and relays are mounted on the left wing of the Japanese car, next to the battery.

Fuse links in the engine compartment of the first generation Mazda 6 are responsible for the reliable and safe operation of the following devices:

  • 1, 2, 3, 21, 35 – not used (spare);
  • 4 – heating system for external mirrors (7.5A);
  • 5, 22 – socket (5, 40A);
  • 6 – power unit ECU (15A);
  • 7 – Mass air flow sensor, power unit ECU;
  • 8 – oxygen sensor (15A);
  • 9, 10 – Mazda 6 1st generation low beam fuse for the right and left headlights (15A);
  • 11, 12 – high beam front optics on the left and right;
  • 13 – accelerator position controller (7.5A);
  • 14 – emergency stop light warning;
  • 15 – brake lights (15A);
  • 16, 17 – control program of the internal combustion engine and automatic transmission (7.5A);
  • 18 – fuel pump fuse Mazda 6 GG (20A);
  • 19, 37 – additional electrical circuits (40, 15A);
  • 20 – electric window lifts (30A);
  • 23 – control unit of the heating complex, reversing lights (30A);
  • 24 – heating radiator fan (40A);
  • 25 – central locking Mazda 6 GG, interior lighting (40A);
  • 26 – heating system (20A);
  • 27 – rear glass heating system (40A);
  • 28 – additional electrical circuits, ABS (60A);
  • 29, 30 – auxiliary electrical circuits, air conditioning fan (30A);
  • 31 – dashboard lighting, dimensions;
  • 32 – interior lighting;
  • 33 – electromagnetic type coupling;
  • 34 – multimedia complex (15A);
  • 36 – circuit for opening the fuel tank hatch (7.5A);
  • 38 – cleaning mechanism for optics (20A);
  • 39 – fog lights (15A);
  • 40 – main fuse-link.

To ensure protection of electrical equipment along the block circuits in the engine compartment of a Japanese car, fuse links with a rated current of ten amperes are most often used. These include elements with serial numbers 7, 11, 12, 14, 16, 31, 32, 33, 40.

Relay unit under the hood

The Mazda 6 GI power unit of the engine compartment is equipped with the following relays:

  • 1 – main fuse link Mazda 6 GG;
  • 6, 8, 10, 18 – radiator cooling fan No. 2, 3, 4, 1;
  • 7 – sound signal;
  • 9 – starter relay;
  • 11 – subwoofer;
  • 12 – rear glass heating complex;
  • 13 – PTF;
  • 14 – air conditioning control program;
  • 15 – main relay;
  • 16 – optics;
  • 17 – side lights;
  • 19 – washing optics complex;
  • 20 – PTF.

Block under the hood

It is located on the left side of the engine compartment, under the protective cover.

Relay circuit

Decoding

  • 1 - main fuse
  • 6 - cooling fan relay No. 2
  • 7 - horn relay
  • 8 — cooling system fan relay No. 3
  • 9 - starter relay
  • 10 - cooling fan relay No. 4
  • 11 - bass speaker relay
  • 12 - rear window heater relay
  • 13 - fog lamp relay
  • 14 - air conditioner relay
  • 15 - main relay
  • 16 - headlight relay
  • 17 - size relay
  • 18 - cooling fan relay No. 1
  • 19 - headlight washer relay
  • 20 - fog lamp relay

Fuse diagram for Mazda 6 GG (Atenza)

Description

120A SPARE Reserve
215A SPARE Reserve
310A SPARE Reserve
4SPARE Reserve
55A GLOW SIG Candles
615A INJ Engine control system
710A ENG BAR Air flow sensor, engine management system
815A ENG BAR2 Oxygen sensor
915A HEAD LR Low beam (right headlight)
1015A HEAD LL Low beam (left headlight)
1110A HEAD HL High beam (left headlight)
1210A HEAD HR High beam (right headlight)
13SPARE Reserve
1410A HAZARD Alarm
1515A STOP Stop lights
1610A ENG+B Electronic engine and automatic transmission control unit
17SPARE Reserve
1820A FUEL PUMP Fuel pump
1940A IG KEY 1 Fuse for various circuits
20SPARE Reserve
21SPARE Reserve
2240A GLOW Ignition
2330A IG KEY 2 Fuse for various circuits
2440A BLOWER Heater fan motor
2540A BTN Interior lighting, central locking
2620A HEATER Heater
2740A DEFOG Heated rear window / rear door glass
2860A ABS Anti-lock brake system, fuse for various circuits
2930A AD FAN Condenser fan motor, fuse for various circuits
3030A FAN Condenser fan motor, fuse for various circuits
3110A TAIL Side lights, instrument cluster illumination
3210A ILLUMI Interior lighting
3310A MAG Electromagnetic clutch
34Radio tape recorder
3530A P.SEAT Seats
36Reserve
3715A SEAT DEICER Fuse for various circuits
3820A H/CLEAN Headlight cleaner
3915A FOG Fog lights
40100A MAIN Main fuse

Fuse box in the Mazda 6 interior before restyling

To gain access to the interior unit, where the fuses and relays of the Mazda 6 GG are located, you will need to remove the decorative cover under the dashboard.

The diagram of the protective devices of the Japanese car before the restyled version includes:

  • R1 – fuel supply pump;
  • R2 – heating radiator fan;
  • 1 – ICE ECU;
  • 2, 9 – instrument panel (5A);
  • 3 – heating complex of seats and rear glass;
  • 4 – additional electrical circuits, heating system for exterior mirrors (7.5A);
  • 5 – wipers and washer complex (20A);
  • 6 – SRS, ABS;
  • 7 – reversing lights (5A);
  • 8 – air conditioning control program;
  • 10 – fuse for the cigarette lighter Mazda 6 GG;
  • 11 – lighting of luggage and interior space;
  • 12 – rear wipers (10A);
  • 13 – mirror position regulator (5A);
  • 14 – circuit for using auxiliary devices;
  • 15, 17 – electric window lifts (20, 40A);
  • 16 – central locking (30A).

Most of the fuse links in the power unit of the interior space of a Japanese car have a current rating of fifteen amperes. These include devices numbered 1, 2, 3, 6, 8, 10, 11, 14.

Block in the interior of Mazda 6 GG (Atenza)

Located at the bottom of the pillar, under the panel, near the driver's left foot.

Option 1

Photo example

Scheme

Description

115A ENGINE IG Engine control system
215A METERIG Instrument cluster
315A SEAT Heated seats, heated rear window
47.5A M.DEF Heated mirrors, fuse for various circuits
520A WIPER Windshield wipers and washers
615A SAS Anti-lock brake system, active safety system (airbags)
75A BACK Reversing light
815A A/C Air Conditioner
95A METER ACC Instrument cluster
1015A CIGAR Cigarette lighter
1115A ROOM Interior lighting, trunk/luggage compartment lighting
1210A R.WIPER Rear window/rear door glass wiper
135A MIRROR Mirror control
1415A R.CIGAR Rear cigarette lighter
1520A P/WIND Electric window lift
1630A DOOR LOCK Central locking
1730A Electric window lift

Fuse number 10 is 15A for the front cigarette lighter, 14 for the rear.

Option 2

Photo

Scheme

Designation

115A CIGAR Cigarette lighter
215A ENGINE IG Engine control system
310A A/C Air Conditioner
45A MIRROR Mirrors
510A SAS Anti-lock brake system ABS, active safety system (airbags)
615A SEAT Seat heating
75A METER ACC - Audio system illumination
815A METER IG Instrument panel (Instrument cluster)
910A R.WIP Rear Wiper
1030A D.LOCK Electric door locks
1115A R.CIGAR Rear Accessory Jack
1220A WIPER Windshield wiper and washer
1315A ROOM Interior lighting
14SPARE Reserve
15SPARE Reserve
16SPARE Reserve

In this version, fuse number 1 at 15A is responsible for the front cigarette lighter, fuse 11 for the rear.

Relay purpose

  • R1 Fuel pump relay
  • R2 Heater fan relay

Removal and replacement procedure

Changing power supply components will not cause any difficulties for Mazda owners. But how, if necessary, can you carry out the procedure for replacing the power supply yourself? We will talk about this further using the example of a salon power supply:

  1. First turn off the ignition and disconnect the battery from the power supply.
  2. Find the location of the power supply. This was stated at the beginning of the article.
  3. Remove the facing protective cover of the power supply unit.
  4. Disconnect the blocks with harnesses leading to the power supply. Using a screwdriver, unscrew the screw that secures it. Press the latch and remove the device.
  5. Replace the power supply with a new one, and install it in the reverse order.

Remove the protective trim from the interior

Following the steps, remove the power supply and replace it with a new one

Repair of heated seats Mazda CX-5

From time to time you may encounter some troubles. For example, a light bulb may not work. What to do in this case? Don't think about the problem, ignore it? Our repairs will be inexpensive. Any button will start working again. The front and rear seats will again be heated in a timely manner. It will be very comfortable to drive in the car in the morning to work or in the afternoon, in the evening for an unexpected meeting or a planned one. Repair of heated seats in Mazda 3, 6, CX 5, CX 7 is not often needed if the system is installed well. If the relay does not work, you need to contact a specialist. Doing anything on your own is much more difficult. It is much easier to change the situation for the better in the warm, well-lit room of our car service center than in a regular garage. The heated seats of Mazda 3 and 6 will be brought into working condition in the shortest possible time. Of course, it is not always possible to repair the heating system. Unfortunately, sometimes you need to install a new one. For example, it is better to change the Peugeot coupling system. If the fuse of an embedded system breaks, of course, it makes sense to try to replace it or repair it. Much depends on the system configuration. The fuse may fail and cause concern to the motorist; just in case, the system will have to be left off. Should I worry in vain and put off repairs until later? Our prices will pleasantly surprise you. In St. Petersburg, we are the best and are ready to prove it to you. Heated seats for Mazda 3, 6, cx 5 or any other model will be carried out in accordance with the standards, using good modern equipment. For safety, confidence that the early morning will be good, the interior is comfortable, a responsible approach and high-quality repairs are needed. That's exactly what will happen. There is no point in turning repairs into a tedious process. By entrusting the work to us, you will be able to see in practice: heated seats for the Mazda CX 5 and not only are a convenient option, a successful upgrade.

Fuse Box Diagrams

2013, 2014, 2015

Engine compartment

Assignment of fuses in the engine compartment (2013, 2014, 2015)

DESCRIPTIONAMP RATINGSECURED COMPONENT
1ADD FAN GE30 ACooling fan
2IG230 ATo protect various circuits
3Injector30 AEngine management system
4FAN DE40 A
5P. WINDOW 130 APower windows (some models)
6
7ADD FAN DE40 A
8EVVT20 AEngine management system
9DEFOG40 AHeated rear window
10DC DC DE40 A
11FAN GE30 ACooling fan
12
13
14
15ENG.MAIN40 AEngine management system
16ABS/DSC M50 AABS, Dynamic Stability Control
17Cabin. + B 50 ATo protect various circuits
18WIPER20 AWindshield wiper and washer
19HEATER40 AAir conditioner
20DC DC REG30 A
21ENGINE.IG17.5 AEngine management system
22C/U IG115 ATo protect various circuits
23H/L LOW L HID L15 AHeadlight (left) (with xenon headlights), low beam (left) (with halogen headlights)
24B/L LOW R15 ALow beam headlight (right) (with halogen headlights)
25Engine315 AEngine management system
26ENGINE215 AEngine management system
27ENGINE115 AEngine management system
28IN15 ATransmission control system (some models)
29N/CLEANING20 A
30A/C7.5 AAir conditioner
31ON THE PUMP15 A
32STOP10 ABrake lights
33R.WIPER15 AAnti-theft system (select models)
34H/L HI20 AHigh beam headlights
35HID R15 AHeadlight (RH) (with Fusion Xenon headlights)
36FOG15 AFog lights (some models)
37ENG. + B 7.5 AEngine management system
38AUDIO27.5 AAudio system
39GLOW SIG5 A
40meter 27.5 A
41METER110 AInstrument panel
42SRS17.5 AAir bag
43BOSE25 AModel with Bose audio system
44AUDIO115 AAudio system
45ABS/DSC S30 AABS, Dynamic Stability Control
46FUEL PUMP15 AFuel system
47FUEL WARM25 A
48TAIL15 ATail lights, License plate light
49FUEL PUMP225 A
50DANGERS25 AFlashers warning of danger. Turn Signals/Front Side Marker Lights, Parking Lights
51DRL15 ADaytime running lights (some models)
52R.OUTLET215 AAccessory sockets
53HORN15 Ahorn
54ROOM15 Aoverhead light

Passenger cabin

Assignment of fuses in the passenger compartment (2013, 2014, 2015)

DESCRIPTIONAMP RATINGSECURED COMPONENT
1P.SEAT D30 APower seat (some models)
2P.WINDOW330 APower windows (some models)
3R.OUTLET315 A
4P.WINDOW225 APower windows
5SRS2/ESCL15 ASeat weight sensor (some models)
6D.LOCK25 APower door locks
7WARM SEAT20 ASeat heating (some models)
8LUKE10 AHatch (some models)
9F.OUTLET15 AAccessory sockets
10MIRROR7.5 APower adjustment mirror
11R.OUTLET115 A
12
13
14
15
16
17m.def7.5 AHeated mirrors (some models)
18
19
20In IND7.5 AAutomatic transmission shift indicator (some models)
21P.SEAT P30 APower seat (some models)

2016

Engine compartment

Assignment of fuses in the engine compartment (2016)

DESCRIPTIONAMP RATINGSECURED COMPONENT
1ADD FAN GE30 ACooling fan
2IG230 ATo protect various circuits
3Injector30 AEngine management system
4FAN DE40 A
5P. WINDOW 130 A
6
7ADD FAN DE40 A
8EVVT20 AEngine management system
9DEFOG40 AHeated rear window
10DC DC DE40 A
11FAN GE30 ACooling fan
12EPB L20 AElectric parking brake (left)
13AUDIO40 AAudio system
14EPB R20 AElectric parking brake (right)
15ENG.MAIN40 AEngine management system
16ABS/DSC M50 AABS, Dynamic Stability Control
17Cabin. + B 50 ATo protect various circuits
18WIPER20 AWindshield wiper and washer
19HEATER40 AAir conditioner
20DC DC REG30 AFor protecting various circuits (some models)
21ENGINE.IG17.5 AEngine management system
22C/U IG115 ATo protect various circuits
23H/L LOW L HID L15 ALow beam headlights (LH)
24B/L LOW R15 ALow beam headlights (right)
25Engine315 AEngine management system
26ENGINE215 AEngine management system
27ENGINE115 AEngine management system
28IN15 ATransmission control system (some models)
29N/CLEANING20 A
30A/C7.5 AAir conditioner
31ON THE PUMP15 ATransmission control system (some models)
32STOP10 ABrake lights
33R.WIPER15 AAnti-theft system (select models)
34H/L HI20 AHigh beam headlights
35HID R15 A
36FOG15 AFog lights (some models)
37ENG. + B 7.5 AEngine management system
38AUDIO27.5 AAudio system
39GLOW SIG5 A
40meter 27.5 A
41METER110 AInstrument panel
42SRS17.5 AAir bag
43BOSE25 AModel with Bose audio (select models)
44AUDIO115 AAudio system
45ABS/DSC S30 AABS, Dynamic Stability Control
46FUEL PUMP15 AFuel system
47FUEL WARM25 A
48TAIL15 ATail lights, License plate light
49FUEL PUMP225 A
50DANGERS25 AHazard warning lights, Turn signals/Front side marker lights, Parking lights
51DRL15 ADaytime running lights (some models)
52R.OUTLET215 AAccessory sockets
53HORN15 Ahorn
54ROOM15 Aoverhead light

Passenger cabin

Assignment of fuses in the cabin (2016)

DESCRIPTIONAMP RATINGSECURED COMPONENT
1P.SEAT D30 APower seat (some models)
2P.WINDOW330 APower windows (some models)
3R.OUTLET315 A
4P.WINDOW225 APower windows
5SRS2/ESCL15 A
6D.LOCK25 APower door locks
7WARM SEAT20 ASeat heating (some models)
8LUKE10 AHatch (some models)
9F.OUTLET15 AAccessory sockets
10MIRROR7.5 APower adjustment mirror
11R.OUTLET115 A
12
13
14
15
16
17m.def7.5 AHeated mirrors (some models)
18R.SEAT W20 ASeat heating (some models)
19R.SHADE7.5 A
20In IND7.5 AAutomatic transmission shift indicator (some models)
21P.SEAT P30 APower seat (some models)

2017

Engine compartment

Assignment of fuses in the engine compartment (2017)

DESCRIPTIONAMP RATINGSECURED COMPONENT
1ADD FAN GE30 ACooling fan
2IG230 ATo protect various circuits
3Injector30 AEngine management system
4FAN DE40 A
5P. WINDOW 130 A
6
7ADD FAN DE40 A
8EVVT SCR120 AEngine management system
9DEFOG40 AHeated rear window
10DCDC DE40 A
11FAN GE30 ACooling fan
12EPB L20 AElectric parking brake (left)
13AUDIO40 AAudio system
14EPB R20 AElectric parking brake (right)
15ENG.MAIN40 AEngine management system
16ABS/DSC M50 AABS, Dynamic Stability Control
17Cabin. + B 50 ATo protect various circuits
18WIPER20 AWindshield wiper and washer
19HEATER40 AAir conditioner
20DC DC REG30 A
21ENGINE. IG1 7.5 AEngine management system
22C/U IG115 ATo protect various circuits
23H/L LOW L HID L15 ALow beam headlights (LH)
24B/L LOW R15 ALow beam headlights (right)
25Engine315 AEngine management system
26ENGINE215 AEngine management system
27ENGINE115 AEngine management system
28IN15 ATransmission control system (some models), ignition switch
29N/CLEANING20 A
30A/C7.5 AAir conditioner
31ON THE PUMP15 A
32STOP10 ABrake lights
33R. VIPER15 AAnti-theft system (select models)
34H/L HI20 AHigh beam headlights
35HID R ST. HEATER 15 AHeated steering wheel (select models)
36FOG15 AFog lights (some models)
37ENG. + B 7.5 AEngine management system
38AUDIO27.5 AAudio system
39GLOW SIG5 A
40meter 27.5 A
41METER110 AInstrument panel
42SRS17.5 AAir bag
43BOSE25 AModel with Bose audio system
44AUDIO115 AAudio system
45ABS/DSC S30 AABS, Dynamic Stability Control
46FUEL PUMP15 AFuel system
47FUEL WARM25 A
48TAIL15 ATail lights, License plate light
49FUEL PUMP2 SCR225 A
50DANGERS25 AHazard warning lights, Turn signals/Front side marker lights, Parking lights
51DRL15 ADaytime running lights (some models)
52R.OUTLET215 AAccessory sockets
53HORN15 Ahorn
54ROOM15 Aoverhead light

Passenger cabin

Assignment of fuses in the cabin (2017)

DESCRIPTIONAMP RATINGSECURED COMPONENT
1P.SEAT D30 APower seat (some models)
2P.WINDOW330 APower windows (some models)
3R.OUTLET315 A
4P.WINDOW225 APower windows
5SRS2/ESCL15 A
6D.LOCK25 APower door locks
7WARM SEAT20 ASeat heating (some models)
8LUKE10 AHatch (some models)
9F.OUTLET15 AAccessory sockets
10MIRROR7.5 APower adjustment mirror
11R.OUTLET115 A
12
13
14
15
16
17m.def7.5 AHeated mirrors (some models)
18R.SEAT W20 ASeat heating (some models)
19R.SHADE7.5 A
20In IND7.5 AAutomatic transmission shift indicator (some models)
21P.SEAT P30 APower seat (some models)

2018, 2022, 2020

Engine compartment

Assignment of fuses in the engine compartment (2018, 2022, 2020)

NameAmplifier ratingProtected Component
1AUDIO DCDC REG30 A2018: Audio system (some models), To protect various circuits 2019-2020: Audio system
2IG230 ATo protect various circuits
3INJECTOR ENG. SUB 30 AEngine management system (some models)
4SCR1 EVVT20 AEngine management system (some models)
5P. WINDOW 130 APower windows
6IG1 230 ATo protect various circuits
7
8ADD FAN DE50 ACooling fan (some models)
9DEFOG40 AHeated rear window
10DCDC DE40 AFor protecting various circuits (some models)
11EPB R20 AElectric parking brake (EPB) (RH)
12EPB L20 AElectric Parking Brake (EPB) (LH)
13Cabin. + B 50 ATo protect various circuits
14FAN GE30 ACooling fan (some models)
15ENG.MAIN40 AEngine management system
16ABS/DSC M50 AABS, Dynamic Stability Control
17HEATER40 AAir conditioner
18WIPER20 AWindshield wiper and washer
19FAN DE50 ACooling fan (some models)
20ADD FAN GE30 ACooling fan (some models)
21Engine315 AEngine management system
22ENGINE215 AEngine management system
23AUDIO27.5 AAudio system
24meter 210 A2018: Instrument cluster (some models) 2019-2020: Not used
25SRS17.5 AAir bag
26COUNTER 110 AInstrument panel
27MOTOR IG17.5 AEngine management system
28IN15 ATransmission control system (some models), ignition switch
29N/CLEANING20 A2018: Headlight washer (some models) 2019-2020: Not used
30A/C7.5 AAir conditioner
31ON THE PUMP15 A2018: Transmission control system (some models) 2019-2020: Not used
32HORN15 Ahorn
33R. VIPER15 A2018: Rear Wiper (Select Models), Anti-Theft System (Select Models) 2019-2020: Anti-Theft System
34H/L HI20 AHigh beam headlights
35
36WIPER. DEI 20 AWiper de-icer (some models)
37ENG. + B 7.5 AEngine management system
38H/D LOW L15 ALow beam headlights (LH)
39GLOW SIG5 A2018: Engine management system (some models) 2019-2020: Not used
40ENGINE 1 ENGINE 415 AEngine management system
41C/U IG115 A2018: To protect various circuits 2019-2020: Engine management system
42ST.HEATER15 AHeated steering wheel (some models)
43
44AUDIO 125 AAudio system
45ABS/DSC S30 AABS, Dynamic Stability Control
46FUEL PUMP15 AFuel system (some models)
47FUEL WARM25 AFuel heater (some models)
48TAIL15 ATail lights, License plate light
49SCR2 FUEL pump 225 A2018: Engine management system (some models) 2019-2020: Fuel system (some models)
50DANGERS25 A2018: hazard lights, turn signals, side lights. 2019-2020: Hazard Flashers, Turn Signals/Front Side Marker Lights, Parking Lights.
51B/L LOW R15 ALow beam headlights (right)
52A STORE25 A2018: Not used 2019-2020: Additional sockets
53STOP10 A2018: Brake lights, Rear fog lights (some models) 2019-2020: Stop lights
54ROOM25 A2018: To protect various circuits 2019-2020: Overhead light

Passenger cabin

Assignment of fuses in the cabin (2018, 2022, 2020)

NameAmplifier ratingProtected Component
1P.SEAT D30 APower seat
2P.SEAT P130 APower seat
3R.SEAT W120 AHeated seat
4P.WINDOW225 APower windows
5SRS2/ESCL15 A2018: Electric steering lock 2019-2020: Not used
6D.LOCK25 APower door locks
7WARM SEAT20 AHeated seat
8LUKE10 ASunroof
9R.OUTLET115 A2018: Accessory sockets 2019-2020: Not used
10MIRROR7.5 APower adjustment mirror
11In IND7.5 AGear shift indicator
12interior115 ATo protect various circuits
13Interior210 A2018: To protect various circuits 2019-2020: Overhead light
14R.OUTLET215 AAccessory sockets
15USB7.5 AUSB socket
16SCR315 A2018: Engine management system 2019-2020: Not used
17SCR415 A2018: Engine management system 2019-2020: Not used
18AUDIO315 AAudio system
19R.SHADE7.5 A2018: Rear sun visor 2019-2020: Not used
20m.def7.5 AHeated mirrors
21

Diagram of the fuse block in the Mazda 6 GG interior after restyling

Since 2006, fuses and relays in the interior of the Mazda 6 GG are responsible for the operation of the following devices:

  • R1 – fuel supply pump;
  • R2 – fan of the heating complex;
  • 1, 11 – socket;
  • 2 – ICE ECU Mazda 6 GG;
  • 3 – heating system (10A);
  • 4 – mirror position regulator (5A);
  • 5 – SRS, ABS (10A);
  • 6 – heating complex of seats and rear glass;
  • 7 – multimedia system backlight fuse (5A);
  • 8 – dashboard;
  • 9 – rear wipers (10A);
  • 10 – central locking (30A);
  • 12 – wipers and washer system (20A);
  • 13 – lighting of luggage and interior space;
  • 14, 15, 16 – not used.

(link to photo source)

On the restyled version of the Mazda 6 GI in the interior mounting block, the most common current rating of the fuse link is fifteen amperes.

The following are the numbers of such protective elements - 1, 2, 6, 8, 11, 13.

Mazda 6 GG fuse box diagrams

If problems arise with the operation of the electrical equipment of the 1st generation Mazda 6, first of all you need to check the protective devices.

Let's look at where the blocks are mounted, their diagram and how Mazda 6 GG fuses are changed.

  1. Mazda 6 GG fuse diagram under the hood
  2. Relay unit under the hood
  3. Fuse box in the Mazda 6 interior before restyling
  4. Diagram of the fuse block in the Mazda 6 GG interior after restyling
  5. Correct replacement of fuses

Notes:

When replacing blown fuses on a Mazda 6, always use only original parts of the same rating, otherwise you may damage the vehicle's electrical system.

If the electrical equipment fails, first check whether the electrical fuses in the indoor unit are good.

If the headlights or other electrical equipment do not work, and you are sure that all fuses located in the interior unit are working, then check the fuses in the engine compartment.

Mazda 6 fuses

Relays - switches, fuses on the Mazda 6 are installed in the image and likeness of previous modifications. The main unit is located in the salon. Depending on the year of manufacture of the machine, the installation location changes:

  • before restyled version (2003 – 2010, 2012 – present): to the left of the central channel of the torpedo
  • Restyling (2010 - 2012): between the front seats, to the left of the passenger seat.

Where is the additional block located: the mounting block with power relays - switches is located in the engine compartment, closer to the frill. Mazda 6 fuses are packaged in a plastic case and covered with a lid on top to prevent moisture from penetrating inside.

The process of replacing mounting block modules is not at all complicated, but the technician needs to be careful during installation. A mismatch in the amperage value of the module contributes to equipment overheating and premature failure.

Fuses and relays Mazda 6 (GH), 2007 - 2012

The main part of the power supply of a Japanese car is protected by fuses. Headlights, electric fans, fuel pump and other powerful current consumers are connected via relays. The protective elements are installed in mounting blocks, which are located in the engine compartment and passenger compartment.


The given diagrams are relevant for Mazda 6 (GH) cars 2007, 2008, 2009, 2010, 2011, 2012, sedan, station wagon and hatchback, with gasoline engines of 1.8, 2.0, 2.5 liters (R4 DOHC).

In the cabin


The unit is located on the driver's side, behind a plastic cover. 1) To gain access to the mounting block located in the cabin, press the latch and slide the cover to the side...


2) ...remove it from the end of the lower trim of the front door pillar, overcoming the elastic resistance of the clamps.

Mazda 6 (GH) interior block fuse diagram

Current, ADecoding
130Window lifters
210Adaptive lighting system
330Central door lock
4Reserve
57,5Instrument panel lighting
615Mazda 6 cigarette lighter fuse
75Electric side mirrors
815Electric outlet
9Reserve
10Reserve
1115Engine management system
125Safety system
1315Dashboard
14Reserve
1520Windshield wiper and washer
1610Air conditioning compressor
1710Tailgate wiper and washer
1815Interior lamps

In the engine compartment

The block is located on the left side of the engine compartment, near the battery.


1) To gain access to the mounting block located in the engine compartment, press the cover latch...

2) ...and remove the cover.

Diagram of elements in the Mazda 6 (GH) engine block
Current, ADescription
Relay
R1A/C compressor relay
R2Main relay
R3Low beam relay
R4Starter relay
R5Horn relay
R6Tail lights
R7Fuel pump relay
R8Electric outlet
R9Engine cooling fan low speed switch
R10
R11High beam relay
R12Engine Cooling Fan High Speed ​​Relay
R13
R14Rear window defroster relay
R15Starter relay
R16Front fog lamp relay
R17
R18Heater relay
Circuit breakers
140Heater
240
330Electric windows
440Engine starting system
540Electrical circuit protection
660Anti-lock braking system ABS
730Engine cooling fan
820AUX HEATER
930Engine cooling fan
1050PRECRASH
1140Rear window defroster
1240Electric seat adjustment
1310Air conditioning system
1415Electric outlet
15DIECER
16
1715Electric sunroof
1820Electric seat heating
1915Interior equipment control unit
2025Audio system
2120headlight washer
2215Fog lights
2325Electric door lock
24
25
265Brake lights
2715Sound signal
285Engine management system
2910Turn signals and hazard warning lights
30
3110Electronic steering lock system
3210Engine management system
33
3440Electrical circuit protection
35
36GLOWSIG
37
387.5Electrically heated mirrors
3930Anti-lock braking system ABS and stabilization system
4015Right low beam headlights
4115Left low beam headlight bulb
4210Right high beam headlight lamp
4310Right low beam headlights
4415Injectors
4520Gasoline pump
46GLOW
4710Engine management system
4810Injectors

Block in the cabin

Located at the bottom of the pillar, under the panel, near the driver's left foot.

Option 1

Photo - example

Scheme

Description

115A ENGINE IG - Engine control system
215A METERIG - Instrument cluster
315A SEAT - Seat heater, rear window heater
47.5A M.DEF - Heated mirrors, fuse for various circuits
520A WIPER - Windshield wipers and washers
615A SAS - Anti-lock brake system, active safety system (airbags)
75A BACK - Reversing light
815A A/C - Air conditioning
95A METER ACC - Instrument cluster
1015A CIGAR - Cigarette lighter
1115A ROOM — Interior lighting, trunk/luggage compartment lighting
1210A R.WIPER - Rear window/rear door glass wiper
135A MIRROR - Mirror control
1415A R.CIGAR - Rear cigarette lighter
1520A P/WIND — Electric windows
1630A DOOR LOCK - Central locking
1730A - Electric windows

Fuse number 10 at 15A is responsible for the front cigarette lighter, fuse number 14 is for the rear.

Option 2

Photo

Scheme

Designation

115A CIGAR - Cigarette lighter
215A ENGINE IG - Engine control system
310A A/C - Air conditioning
45A MIRROR - Mirrors
510A SAS - Anti-lock brake system ABS, active safety system (airbags)
615A SEAT - Seat heating
75A METER ACC - Audio system illumination
815A METER IG - Instrument panel (Instrument cluster)
910A R.WIP - Rear wiper
1030A D.LOCK — Electric door locks
1115A R.CIGAR - Rear accessory socket
1220A WIPER - Windshield wiper and washer
1315A ROOM - Interior lighting
14SPARE - Reserve
15SPARE - Reserve
16SPARE - Reserve

In this version, fuse number 1 at 15A is responsible for the front cigarette lighter, fuse 11 for the rear.

Relay purpose

  • R1 - Fuel pump relay
  • R2 - Heater fan relay

Recommendations for servicing the mounting block

  • Periodically check the condition of the fuses, replace with new ones as necessary;
  • After long trips through puddles or in the rain, check for moisture and condensation in the mounting block. Dry the board with a stream of compressed air;
  • If the mechanism suddenly stops functioning, do not rush to replace it with a new one. Check the module status, use a multimeter to diagnose.

Despite the simplicity of the design of the mounting block, carry out diagnostic work at a service station. Unprofessional intervention in repairs leads to undesirable consequences.

Fuse box location

If the electrical system doesn't work, first check the fuses on the left side panel. If the headlights or other electrical components don't work but the fuses in the passenger compartment are OK, check the fuse box under the hood.

Passenger cabin

The fuse box is located on the left side of the vehicle.

Engine compartment

Mazda 6 seat heating does not work

When the seat heating is on, a minute is enough to feel the warmth coming from the heating parts from under the upholstery. But one small breakdown calls into question the driver’s comfortable well-being during winter trips. Before you begin repairing heated seats, you need to know about the reasons that cause this malfunction.

Heated front seats (optional equipment)

So, there are only three possible circumstances that cause the heating to burn out: Sometimes, in some car models, seat heating becomes very unreliable. The normal functioning of the seat heating depends on the correct selection of the studio.

Therefore, before diagnosing the device itself, it is necessary to check the fuse. The standard F33 is rated at 15 amps. This device is mounted in a block, which is usually installed at the bottom of the panel where the driver’s seat is.

If the light bulbs do not work, you need to change them. What you need, be prepared for the fact that the chair will have to be taken out of the car and disassembled. Of course, there are cases when it is desirable to resolve everything without a workable disassembly version, if, for example, the cable has failed - there is no way to do without this, the heated seats of the Mazda 3 do not work. In accordance with the instructions, the oil in the automatic transmission of a Mazda 6 car does not need to be changed at all.

But reality indicates something completely different. The automatic transmission does not reach its intended service life and fails even earlier.

Experts believe this is due to the oil. Mazda 6 Gh 2.

You need to entrust this function to the specialists of the technical center, you can save a certain amount of currency and change the oil in the Automatic transmission for another Mazda manual transmission. I took it apart, everything was clean inside, there was no water ingress, nothing burned anywhere.

After connecting it to the connector and trying to put it into action, the configurations did not work out, it doesn’t even buzz. Although if you throw it directly at the battery, it starts working.

Heated seats

To remove a heated seat switch that is not working, first remove the connector. In most car models, it is quite a bit to rock the element and pull it.

Unfortunately, be careful, some car brands install unique types of fasteners. To release the stoppers you need to reach inside the casing with a screwdriver. Later, make some efforts so that the part does not work, the heated seats of the Mazda 3 outward. There will be three contacts here. It is required to measure the resistance on 2 sides. The middle contact is responsible for the light bulb.

If the resistance is the same in all positions of the adjustment wheel, check the contacts.

Maybe there was some grease in there. Under these circumstances, clean them and everything should work fine. Often the reason why the driver's seat heating does not work is due to a break in the heating element.

There is an option to check the functionality of this part of the structure without removing the chair, but thin and experienced fingers will be useful for this purpose, the method itself consists of the following steps: RTS on a mobile I haven’t written anything for a long time, I decided to provide a short report, in case it comes in handy for someone So, a long time ago my light bulb burned out illumination of the heated seat button, I decided to remove it to see if it was true.

Sanchala thought that it was not worth writing about this in detail in the blog, but then I thought, what if the heated seats of the Mazda 3 don’t work? It will still come in handy, so I’ll describe the process, it’s very easy to remove: We disassemble the central tunnel, it’s very simple - drag the plastic lining up by opening the glove compartment and unscrewing the gearshift knob.

Then unscrew the 2 screws securing the ashtray and pull it out, actually 3. Disconnect all the terminals, then press the ears with a screwdriver and your finger in the place indicated by the arrow and push the button out.

Next, we take out the light bulb, the heated seats of the Mazda 3 do not work, pull it out with a thin screwdriver or something flat, insert it into the groove of the light bulb socket and turn it counterclockwise, then take out the light bulb.

Fuses and relays under the hood

They are located in the engine compartment between the battery and the left wing of the car. You can open it by pressing the special latch at the top of the block.


Location and access to the unit under the hood


Fuse and relay diagram under the hood of Mazda 6 gh

No. on the diagramDenomination pre-laProtected circuit
140 AHeater, heating/interior heating fan motor (HEATER)
240 A*Auxiliary heater (PTC) (select models)*
330 APower windows (P.WIND)
440 AEngine starting system - ignition switch (lock) (electrical consumer circuits activated when the ignition is started and turned off when the starter is turned on) (IG KEY2)
540 AProtection of various electrical circuits (BTN)
660 AABS braking system and anti-skid system DSC (ABS MOTOR)
730 AEngine cooling fan (electric radiator fan motor) (FAN 2)
820 A*Auxiliary heater (AUX HEATER) (some models)*
930 AAdditional engine cooling fan (AD FAN)
1050 APre-emergency safety system (PRE CRASH)
1140 AElectrically heated/heated rear window (DEFOG)
1240 AElectric front seat adjustment (P.SEAT)
1310 AAir conditioning (A/C MAG)
1425 AElectrical socket (OUTLET1)
15Heated/heated windshield (DEICER)
16Empty (reserved)
1715 ASunroof (SUN ROOF)
1820 AHeated/heated seats (SEAT WARM)
1915 ADimensions; rear lights; BCM system (comfort unit) (TAIL)
2025 ARadio/audio system (BOSE)
2120 AHeadlight washers (H/CLEAN)
2215 AFog lights (PTF) (FOG)
2325 AElectric door lock; Door closer (hatchback), trunk lock (CLOSER)
24Empty (reserved)
25Empty (reserved)
2610 AStop lights (lights) (STOP)
2715 ASignal (horn, horn) (HORN)
285 AEngine management system (EGI)
2910 AHazard warning light (HAZARD)
3020 ATCM system (TCM.F.WARMER)
3110 AElectro. steering wheel (steering rack) locking system (STEERING LOCK)
3210 AEngine control system, control unit for dosing and supply of fuel additive (ENGINE + B)
33Glow plugs (GLOWSIG)
3440 AIgnition switch (lock) (electrical consumer circuits activated when the ignition is started and not turned off when the starter is turned on) (IG KEY 1)
3520 AInjectors (INJ)
3615 AAccessory socket in luggage compartment (OUTLET 3)
3715 AAccessory socket in center panel (OUTLET 2)
387.5 AElectrically heated (heated) side mirrors (M.DEF)
3930 AABS brake system and stabilization system (ABS/SOL)
4015 ALow beam - right headlight (HEAD LOW R)
4115 ALow beam - left headlight (HEAD LOW L)
4210 AHigh beam - right headlight (HEAD HIGH R)
4310 AHigh beam - left headlight (HEAD HIGH L)
4415 AInjectors (INJ)
4520 AFuel pump, fuel system (FUEL PCM)
46Glow plugs (GLOW)
4710 AEngine control module (PCM)
4810 AInjectors (EGI INJ)
49125 AMain fuse (MAIN)

You should know that in this unit under the hood there is also a fuse and a relay that are responsible for the operation of the cigarette lighter and additional sockets (see Prev. No. 14 for 25 Amps and Relay No. 8).

For your information:

  • There is no separate fuse for the license plate light in the Mazda 6 gh (if all other lamps are on, then you should look for the reason in the wiring).

Relay

No. on the diagramProtected circuit
R1Air Conditioning Relay (A/C RELAY)
R2Main Relay (EGI MAIN GLOW RELAY)
R3Headlight low beam relay (HEAD LOW RELAY)
R4Starter Relay (STARTER RELAY)
R5Signal relay (horn, horn) (HORN RELAY)
R6Rear light relay (BACK RELAY)
R7Fuel pump relay (EGI MAIN FUEL PUMP REKAY)
R8Outlet relay (OUTLET RELAY)
R9Relay of the first (low) speed of the engine cooling system fan (radiator) (FAN RELAY)
R10Relay of the first (low) speed of the additional fan of the engine cooling system (radiator) (AD FAN RELAY)
R11Headlight high beam relay (HEAD HIGH RELAY)
R12Relay for high speed fan of the engine cooling system (radiator) (FAN RELAY 2)
R13High speed relay for additional engine cooling fan (radiator) (AD FAN RELAY 2)
R14Heated/heated rear window relay (DEFOG RELAY)
R15Starter Relay (AT MAIN STARTER 2 RELAY)
R16Fog lamp relay (front fog lights) (FOG RELAY)
R17Heated/defroster relay (DEICER RELAY)
R18Heater (stove) relay (HEATER RELAY)

Headlight washer fuse Mazda 6 gg

There was a case when, due to my own fault, when replacing the side lights, the wiring shorted and as a result the fuse blew, and this is the first time in all that I had to go into the fuse box (hopefully the last one) and look for the fuse that is responsible for the side lights. I opened the fuse cover and realized that there was no translation in Ukrainian or Russian, so I had to look for it.

At first I searched in e-books for Mazda operation, but it wasn’t clear. Then I just Googled and finally came across one topic (the only one) of a guy who had the same problem and posted a transcript on the forum just in case. This case happened to me, thanks to the author of the topic, everything was replaced quickly and it works

Correct replacement of fuses

familiarize yourself with the location of the protective elements of the Mazda 6 GG using the diagram on the back of the power block covers.

Directly in the blocks there are tweezers for removing damaged devices.

The process of changing fusible threads with a break involves performing the following operations:

  1. The cause of failure of the protective element is determined and eliminated - short circuit, poor contact or oxidation, overcurrent.
  2. The fuse is grabbed and pulled out from the contact part with tweezers.
  3. A new device is being installed. It is strictly forbidden to use fuse links with a different rated current, as well as various wires for changing. This is accompanied by the danger of damaging electrical appliances and igniting wiring. As a last resort, you can use a protective device that is responsible for the operation of non-critical electrical devices. To eliminate such situations, it is recommended to have the most popular protective elements of ten and fifteen amperes as replacements.
  4. The procedure for changing the relay is identical, but to remove the device, you will need to slowly loosen it and pull it out.

Auto parts stores and Mazda 6 disassembly

Below is a list of auto shops and dealerships selling original and non-original interior parts (dashboards, seats, upholstery, etc.) for Mazda 6, new or used. When choosing a store, we recommend focusing on customer reviews and store ratings.

To identify the vehicle and reliably select the Mazda 6 I GG Hatchback fuse box, you should carefully select the vehicle modification. To do this, use clarifying information with data containing: power, measured in horsepower (example 103 hp), engine size (example 1.6 liters), type (example gasoline) and model + engine code, as a rule, this parameter rarely used, but you can only find it in the vehicle title, you can also pay attention to the drive axle (there are rear, front or all-wheel drive), and a mandatory parameter is the release date, which divides the vehicle model into restyling, pre-restyling, first and last year production.

This data serves to uniquely install spare parts during a certain production period, as manufacturers are constantly upgrading cars off the assembly line.

How to change Mazda 6 fuses

You need to release the fuse box cover latch and remove the cover. On the reverse side you can find spare fuses, replacement pliers, and a fuse layout. Diagrams can also be found in the repair manual.

Use pliers to grab the desired fuse and pull it out of the socket. To check, you can look at the removed part against the light . If the thread inside is damaged, the fuse has blown.

The new fuse must be of the same rating (5A, 10A, 15A, 20A, etc.) as the blown one. To make it easier to navigate, the fuses are painted in different colors.

If the problem with the consumer (headlights, power windows, interior lighting, etc.) has not been resolved, there may be a short circuit or the electricity consumer itself is faulty.

Fuses and relays Mazda 6 (GJ), 2012 - 2022

Most of the power supply circuits of the electrical equipment of the Japanese sedan are protected by fuses. Headlights, electric fan motors, fuel pump and other powerful current consumers are connected through a relay. The protective elements are installed in mounting blocks, which are located in the engine compartment and interior.


The diagrams of the 3rd generation Mazda 6 in the GJ body of 2012, 2013, 2014, 2015, 2016, 2022, 2022, 2022, 2022 model years are considered.

In the engine compartment

Located near the battery. Behind a plastic cover.


General view of the block.

Engine block fuse diagram
Current, ADecoding
130Engine cooling fan (for some versions)
230Protection of various electrical circuits IG2
330Engine management system (for some versions) INJECTOR
440Engine cooling fan (for some versions)
530Power windows (on some variants)
6Reserve
740Engine cooling fan (for some versions)
820Engine management system (for some variants) EVVT
940Electric heated rear window
1040Protection for various electrical purposes (for some versions) DCDC DE
1130Engine cooling fan (for some versions)
12Reserve
13
14
1540Engine management system ENG.MAIN
1650Anti-lock braking system ABS (ABS), anti-skid system (DSC)
1750Protection of various electrical circuits CABIN +B
1820Windshield cleaner and washer
1940Air conditioner
2030Protection of various electrical circuits (for some versions)
217.5Engine management system
2215Protection of various electrical circuits
2315Headlight (left)*1, Low beam headlight (left)*2
2415Low beam headlight (right)*2
2515ENGINE 3 engine management system
2615Engine management system ENGINE 2
2715Engine management system ENGINE 1
2815Transmission control system (for some versions), ignition switch
2920Headlight washer (for some versions)
307.5Air conditioning A/C
3115Transmission control system (for some variants)
3210Brake lights, rear fog light (for some versions)
3315Rear window wiper (for some versions)
3420Driving lights
3515Headlight (right)*1
3615Front fog lights (for some versions)
377.5Engine management system ENG.+B
387.5Audio system
395Engine management system (for some variants) GLOW SIG
407.5Instrument cluster (for some versions)
4110Instrument cluster
427.5Airbags SRS1
4325Vehicles equipped with a Bose audio system
4415Audio system
4530Anti-lock braking system (ABS), anti-skid system (DSC)
4615Fuel system FUEL PUMP - fuel pump fuse (for some versions)
4725FUEL WARM fuel heating (for some versions)
48TAIL
49
5050Hazard warning lights, turn signals, front and rear position lights, license plate lights
51DRL
5215Electrical sockets R.OUTLET2
5315Sound signal
5415Interior lighting
Note: *1. Headlights with xenon lamps, *2. Headlights with halogen lamps.
Relay diagram in the motor block

CodeDescription
FUEL PUMP RELAYGasoline pump
OUTLET RELAYSockets
HEADLIGHT LO RELAYdipped headlights
IG1 RELAYIgnition
FRONT FOG LIGHT RELAYFront PTF
COOLING FAN RELAY NO.2Cooling fan No. 2
MAIN RELAYMAIN RELAY
COOLING FAN RELAY NO. 3 Cooling fan No. 3
DRL RELAYDho
HORN RELAYHorn
COOLING FAN ACC RELAYCooling fan No. 1
TNS RELAY (TAIL)Dimensions TNS
A/C RELAYAir conditioner
FUELINJECTOR RELAYFuel injector
ELECTRIC AT OR OIL PUMP RELAYELECTRIC TRANSMISSION RELAY OR TRANSMISSION OIL PUMP RELAY
HEADLIGHT HI RELAYHeadlights
STARTER RELAYStarter
BLOWER RELAYFan
ELECTRIC VARIABLE VALVE TIMING RELAYCharging the solenoid valve
REAR WINDOW DEFROSTER RELAYREAR WINDOW DEFROST RELAY

In the cabin


The block is located near the left end of the instrument panel, near the driver’s foot.
Closed with a plastic cover. Access example.

Mazda 6 interior fuse box diagram

Current, ADescription
130Electric seat adjustment (on some versions)
230Power windows
3R.OUTLET3
425Power windows
515Steering lock
625Central electric lock
720Electrically heated seats (for some versions)
810Roof vent (for some versions)
915Electrical sockets (cigarette lighter fuse)
107,5Electrically adjustable rear view mirrors
1115Electrical Outlets (On Some Options)
12Reserve
13
14
15
16
177,5Electrically heated exterior mirrors
18
19
20
2130Electric seat adjustment (on some versions)

Where are they located?

There are several fuse blocks themselves in a 2006 or 2008 Mazda car. And not for nothing, because modern foreign cars (even starting from 2002) are literally “stuffed” with modern gadgets and other types of equipment. Therefore, protecting all devices is a priority for the fuse box. The protection elements of the washer, cigarette lighter, headlight bulbs, taillight bulbs, fog lights or headlight washer all need reliable protection. Therefore, the company’s engineers decided to introduce several power supplies into the car.


Mazda 6 car

The main power supply is located inside the car, near the driver's seat. To get to it, you need to open the driver's door. In the area of ​​the feet you will be able to see a protective plastic cover, removing which will reveal the salon mounting power supply.

This is interesting: Spare parts for foreign cars

The second power supply unit, which also contains relays, is located in the engine compartment. If you open the hood and face it, you will see this power supply on the right side. In particular, it is located directly in front of the driver's seat. There is also another block with a relay, the purpose of which will be described below.

Most power supply circuits for vehicle electrical equipment are protected by fuses. Headlights, electric fan motors, fuel pump and other powerful current consumers are connected through a relay. Fuses and relays are installed in mounting blocks, which are located in the engine compartment and interior of the car.

Most fuses are installed in a mounting block located in the engine compartment. Purpose of fuses, fuses and relays in the mounting block located in the engine compartment.

In addition, the fuses are located in the mounting block in the car interior at the end of the instrument panel on the left side. The circuits protected by these fuses.

In the cabin

1) To gain access to the mounting block located in the cabin, press the latch and slide the cover to the side...

2) ...remove it from the end of the lower trim of the front door pillar, overcoming the elastic resistance of the clamps.

Fuse numbers in the mounting block located in the passenger compartment

Circuits protected by fuses installed in the mounting block of the Mazda 6 (GH) interior

NumberCurrent strength, AProtected circuit
130Window lifters
210Adaptive lighting system
330Central door lock
4Reserve
57,5Instrument panel lighting
615Cigarette lighter
75Electric side mirrors
815Electric outlet
9Reserve
10Reserve
1115Engine management system
125Safety system
1315Dashboard
14Reserve
1520Windshield wiper and washer
1610Air conditioning compressor
1710Tailgate wiper and washer
1815Interior lamps

In the engine compartment

1) To gain access to the mounting block located in the engine compartment press the cover latch... 2) ...and remove the cover.
Numbers of fuse links, fuses and relays in the mounting block located in the engine compartment

Circuits protected by fuses and relays installed in the mounting block of the Mazda 6 (GH) engine compartment

NumberCurrent strength, AProtected circuit
Relay
R1A/C compressor relay
R2Main relay
R3Low beam relay
R4Starter relay
R5Horn relay
R6Tail lights
R7Fuel pump relay
R8Electric outlet
R9Engine cooling fan low speed switch
R10
R11High beam relay
R12Engine Cooling Fan High Speed ​​Relay
R13
R14Rear window defroster relay
R15Starter relay
R16Front fog lamp relay
R17
R18Heater relay
Circuit breakers
140Heater
240
330Electric windows
440Engine starting system
540Electrical circuit protection
660Anti-lock braking system
730Engine cooling fan
820AUX HEATER
930Engine cooling fan
1050PRECRASH
1140Rear window defroster
1240Electric seat adjustment
1310Air conditioning system
1415Electric outlet
15DIECER
16
1715Electric sunroof
1820Electric seat heating
1915Interior equipment control unit
2025Audio system
2120headlight washer
2215Fog lights
2325Electric door lock
24
25
265Brake lights
2715Sound signal
285Engine management system
2910Turn signals and hazard warning lights
30
3110Electronic steering lock system
3210Engine management system
33
3440Electrical circuit protection
35
36GLOWSIG
37
387.5Electrically heated mirrors
3930Anti-lock braking system and stabilization system
4015Right low beam headlights
4115Left low beam headlight bulb
4210Right high beam headlight lamp
4310Right low beam headlights
4415Injectors
4520Gasoline pump
46GLOW
4710Engine management system
4810Injectors

This is interesting: How to bind a BMW E39 key? Step-by-step guide to binding

PSU with relay under the hood

You can find another power supply with a relay in the engine compartment, in the place shown in the diagram.
As for the purpose of the links:

Part numberPurpose
1Main fuse of the unit.
6This relay is designed to protect the circuit of the second electric fan of the cooling system.
7Steering wheel signal circuit protection device.
8This component protects the circuit of the third cooling fan.
9A device that protects the starter wiring of a machine.
10The fourth cooling system fan.
11Link of a dynamic low-frequency device.
12Ensures the functionality of the mechanism designed to heat the rear window.
13The device protects fog lamp bulbs from overvoltage.
14Responsible for the functioning of the climate system, in particular the air conditioner.
15The main element of this power supply.
16This part provides protection for the headlight bulbs.
17Responsible for the operation of the machine's dimensions.
18The first fan of the cooling system.
19A device that protects the headlight washer mechanism. It should be noted that in Mazda cars of 2006 and 2008 releases, the headlight washer link is weak, as it often fails. For the headlight washers, original fuses should be used to avoid frequent failure.
20The device of the fog lamp circuit.
21A mechanism designed to ensure the operation of the heating system fan.
22This component is one of the most basic. He is responsible for the operation of the gasoline pump. If it fails, starting the engine will be impossible. Therefore, if you are faced with the problem of a non-working engine, you need to first check the fuel pump relay.

Replacing Mazda 6 fuses in the internal block. Work order:

The unit is located near the driver's seat under the dashboard on the left.

1. Turn the ignition switch to the “OFF” position.

2. Open the fuse box cover by prying it from the back.

3. In the engine compartment, in the fuse box, there are special pliers. Using these pliers, remove the desired fuse from the socket.

4. To test the old fuse, hold it near a light bulb. If the thin metal strip in the center of the old fuse is burnt or broken, the old fuse is likely blown and should be replaced.

5. If it is blown, replace the Mazda 6 fuse with a new one.

6. Insert the new fuse back into its socket. Make sure it is securely seated in the panel slot.

Note:

The new fuse for the Mazda 6 must be designed for exactly the same rated electric current. But if such a fuse is not available at the time you need, then as a temporary measure you can use a fuse designed for the same rated current value, which will not significantly affect the functioning of the car, for example, a fuse from the “AUDIO” or “OUTLET” socket.

7. Reinstall the Mazda 6 fuse box cover and secure it securely.

Replacing fuses on a Mazda 6

Preparatory stage: no tools are needed, since there is no need to unscrew anything.

Sequencing:

  • We place the Mazda 6 on the platform, block the rear wheels with wheel chocks, and squeeze the parking brake;
  • To replace modules in the cabin, you need to open the front passenger door. On the right side of the central channel there is a technological hatch;
  • Carefully open it and look at the layout of the modules. We remove the fuse by serial number. The location diagram is indicated on the back of the cover;
  • We check the current indicator (amperage) with the data specified in the instruction manual.

Note to the driver!!! It is unacceptable to install fuses with higher or lower current strength. In both cases, this will lead to failure of the equipment that is assigned to the module.

  • If you need to replace the entire mounting block in the cabin, you will need a Phillips head screwdriver. We unscrew two screws, disconnect the contacts from the board, remove it from its regular place;
  • We carry out preventive maintenance, replace worn elements with new ones, and assemble the structure in the reverse order.

Algorithm for replacing relay switches in the engine compartment of a Mazda 6 car

  • Open the hood, stop the engine, remove the power terminals from the battery;
  • On the right side under the hood, closer to the frill, there is a mounting block with power relays;
  • We remove the faulty element, having first checked the location according to the diagram indicated on the back of the plastic cover.

We install new modules, close the lid, check that the units are working properly, and start the engine.

The average service life of fuses is 45 thousand km.

Mazda 6 seat heating does not work

When winter sets in, the issue of heated seats comes to the fore. No driver wants to sit on an icy chair and wait for it to warm up from human body heat.

When the seat heating is on, it takes a few minutes to feel the heat coming from the heating elements underneath the upholstery. But one small breakdown casts doubt on the driver’s comfort during his winter trips.

Before you begin repairing the seat heating, you need to find out the reasons that cause this malfunction. Here are the circumstances that cause burnout, and maybe three only:

  • faulty fuse;
  • breakdown of the heating tape inside the structure;
  • control panel on another switch located in the seat.

Sometimes in some cars the heated seats become very unreliable. As a rule, this applies to economical cars. It is enough to “step” on the seat with your knee and a fracture occurs. Despite this, expensive cars such as the Jaguar in the other Lexus do not have these problems, but inexpensive Citroens and Renaults often have unreliable heating strips.

The normal functioning of seat heating depends on the correct choice of studio, on how the vehicle’s on-board network works. Therefore, you should check the fuse before diagnosing the device itself.

The standard F33 is rated at 15 amps. This unit is installed in a unit that is usually installed at the bottom of the driver's seat panel. If the light is not working, changes need to be made.

What you need, be prepared for the chair to be pulled out of the car and disassembled. Of course, of course, when it is desirable to solve everything without the correct disassembly version, for example, if the cable has failed, you will not do without this procedure.

Installation of heated seats Mazda 6

We will repair heated seats that are not working, using the Citroën C4 Picasso as an example.

To test the switch, it must be removed. On a theoretical level, this will be done without removing the chair. However, in reality, something like this is rarely implemented. However, there are some difficulties associated with the transition to some models. Therefore, by removing this part directly in the salon, you risk destroying the skin and the device itself.

To remove a heated seat switch that doesn't work at first, first remove the connector. In most car models, the element wobbles a little and pulls down. Unfortunately, be careful, some car brands install unique types of fasteners.

To compress the plugs, you need to reach inside the housing with a screwdriver. Make a little effort later to get the part. There will be three contacts. It is necessary to measure the resistance on both sides. The middle contact is responsible for the light bulb.

If the resistance is the same in all positions of the adjustment wheel, check the contacts. Perhaps it was lubricant. Under these conditions, clean them and everything should work fine.

Often the reason why the driver's seat heater does not work is due to a broken heating element. You can check the functionality of this part of the structure without removing the chair, but it is useful for thin and experienced fingers; the method consists of the following steps:

  1. Bend your back strongly.
  2. Insert your hand into the gap between the backrest and the seat.
  3. Try pressing to find the backrest fastenings. They are usually located left and right of center and one down.
  4. Remove the nozzle.

By performing these simple manipulations, you need to remove two connectors for heated seats that do not work. If there is a desire, there is an opportunity to take what remains for our client three. Just push the latches up. Just pull down.

Remove the connectors and check them. In this context, the power of resistance itself is not so fundamental. Just his mother. During testing, the following contacts must be checked:

  • two contacts on the back;
  • four per pillow;
  • two last and two minor.

If you find the location where the failure occurred, you can easily repair the heating that is not working.

When repairing heated seats, it will be useful to remove the chairs themselves. In fact, it's not as hard as you might initially think. Simply unscrew the four bolts and disconnect the connector that secures the chair to the base.

There is a seat belt attached to one end of the seat, which is not heated. You will need to put some effort into disabling this device. To do this you will need to disassemble it.

The plastic seat belt cover is attached to special star bolts. They have protrusions and you need a special screwdriver to remove them. In particular, removing the cover is a major challenge and after that, just follow these steps:

  • remove the clamping bar;
  • unlock the latch;
  • remove the belt buckle.

Then remove the items from the frame. Be careful not to damage the seat heater that is not working.

Mazda 6 door stop repair

To remove the cushion, loosen the clamps and clips along the edges. The lumbar support for seat heating must also be removed. Unfortunately, without this process the device works.

It is also necessary to remove the handle responsible for tilting the backrest. When you separate the non-working cushion from the chair, you can easily repair it. The process can be divided into the following stages:

  1. Remove the right lining from the top.
  2. Remove the plastic housing.
  3. Remove your elbow.
  4. Remove the straps holding the backrest in place.
  5. Remove the headrest.
  6. Pull back.

If you forced our client to leave the items listed, you can work on the seat heating element.

Then take the Teflon cable and replace the damaged section. To begin with, you still need to think about trimming the ends of the wires and tinning them. Combine the resulting structure and put on a special cembroke.

After repairing the seat heating, please check if there is any contact with our customer before reassembling. Only later can the chair be restored to its original form. Glue is necessary for reassembly and the foam must be glued with it.

Every driver can fix faulty heated seats. The main thing is to be patient and spend time on diagnostics and dismantling. For beginners, this procedure takes 5-6 hours, for a specialist. about 2.

Mazda 6 GG1 (2005) - fuse and relay box

Applies to vehicles produced in the years:

2005

The cigarette lighter on the Mazda 6 GG1 is fuse number 10, fuse 14 in the passenger compartment fuse box and fuse 8 in the engine compartment fuse box.

Engine compartment

Mazda 6 - fuses - engine compartment

NumberNameAmps [A]Description
1SPAREtwenty
2SPARE15
3SPARE10
4
5
6INJ15Injector
7ENG BAR10 * 1Air flow sensor;
Exhaust gas recirculation control valve.
15 * 2
8ENG BAR2*115O2 sensor
ENG BB*25Cooling fan
9HEAD LR10Low beam (right)
10HEAD LL10Low beam (left)
11HEAD HL10High beam (left)
12HEAD OF HR10High beam (right)
13ETC7,5Accelerator position sensor
14GAMBLE10Turn on the traffic light
15STOP15Brakes;
Rear lights.
16TCM10TCM
17ENG+B7,5PCM, TCM
18FUEL PUMP15Fuel pump
19IG KEY40Windshield wiper and washer;
Motor controller;

Easier.

20P. WINDthirtyWindow lifter
21
22
23IG KEY2thirtyRear wiper motor *;
Heater controller.
24BLOWER40Fan motor
25BTN40Lighting in the car interior;
Electric door lock.
26
27DEFOG40Heated rear window
28ABS60ABS*
29ADVERTISING FAN * 1thirtyCooling fan
FAN2*2
30FAN*1thirtyCooling fan
FAN1*2
31TAIL10Rear lights;
License plate lighting;

Parking lights.

32ILLUMI10Dashboard lighting
33MAG10Magnetic coupling
34AUDIO15Public address system
35P. SEATthirtyElectric seat *
36OPENING7,5Trunk release motor *
37
38IG1*215CAT SSR
39FOG15Fog lights*
40MAIN100 * 1To protect all circuits
COUNTER3120 * 2
* 1 2.5L engine
* 2 3.7L engine

Passenger cabin

The fuse box is located on the left side of the car under the door.

Mazda 6 - fuses - left side of the car

NumberDescriptionAmps [A]Description
1IG ENGINE15Engine management system
2IG COUNTER15Instrument panel
3SEAT15Seat heating *;
Heated rear window.
4M.DEF7,5Heated mirrors
5WIPERtwentyWindshield wiper and washer
6SAS15ABS unit *;
SAS division.
7
8Air conditioner15Heater
9ACC COUNTER5Automatic unit shutdown
10CIGAR15Easier
11NUMBER15Car interior lighting
12R.W.I.P.10Rear wiper *
13MIRROR5Electric rear view mirrors;
Audio system.
14R.CIGAR15Auxiliary outlet
15
16D.LOCKthirtyElectric door lock
17

Reasons for fuses failure on Mazda 6

  • Failure to comply with technical inspection regulations;
  • Purchase and installation of non-original components
  • Unprofessional installation;
  • Mechanical damage to the mounting block, accident, impact, collision;
  • Violation of the integrity of the insulating layer of electrical wiring;
  • Short circuit in the circuit;
  • Loose terminal contacts;
  • Oxidation of terminals;
  • Formation of condensation, moisture ingress into the mounting block;
  • Manufacturing defect.

Fuses and relays in the cabin

The number of elements, their purpose and location may vary depending on the year of manufacture, market or machine configuration. This is especially true for the interior unit.

There are two common options for its implementation. Moreover, regardless of the version and modification of the car, it is always installed near the driver’s left foot in the rack below under a special protective panel. To access the unit, you must remove its protective plastic panel.

Option 1

This design is typical mainly for cars produced before restyling, before 2005.

The fuses and relays are located as follows:


Photo of fuses in the Mazda 6 gg interior (option 1)


Fuse and relay diagram in the Mazda 6 gg interior (option 1)

No. on the diagramDenomination pre-laProtected circuit
115 AEngine control system (ENGINE IG)
215 AInstrument set (METER IG)
315 AHeated/heated seats and rear window (SEAT)
47.5 AHeated/heated side mirrors, fuse for various electrical circuits of the vehicle (M.DEF)
520 AWipers (wipers) and washers (WIPER)
615 AAirbags (active safety systems) (SAS), ABS functions (some models)
75 ALamps/reversing lights (BACK)
815 AAir conditioning, climate control (A/C)
95 AInstrument set (METER ACC)
1015 ACigarette lighter (CIGAR)
1115 ALighting (plafonds, lighting) of the interior space and trunk (ROOM)
1210 ARear wiper (rear door wiper) (R.WIPER)
135 AControl and adjustment of side rear view mirrors (MIRROR)
1415 ARear cigarette lighter (connector for additional electrical equipment) (R.CIGAR)
1520 AElectric window lift (P/WIND)
1630 ACentral locking (DOOR LOCK)
1730 AEmpty (reserve), or electric window lift (some models)
R1Fuel pump relay (FUEL PUMP)
R2Heater (relay) (Blower)

The cigarette lighter fuse is number 10 with a current of 15 Amps. For the socket (cigarette lighter) at the back - the socket number 14 is responsible for 15 or 10 Amperes (depending on the modification of the car).

Option 2

This scheme is typical for Japanese cars after restyling in 2005. It is somewhat different from the previous one. At the same time, the block itself has the same location in the Mazda interior.


Photo of fuses and relays in the interior of the Mazda 6 gg (option 2) Diagram of fuses and relays in the interior of the Mazda 6 gg (option 2)

No. on the diagramDenomination pre-laProtected circuit
115 ACigarette lighter (CIGAR)
215 AEngine control system (ENGINE IG)
310 AAir conditioning, climate control (A/C)
45 AControl and adjustment of side rear view mirrors (MIRROR)
510 AAirbags (active safety systems) (SAS), ABS functions (some models)
615 AHeated/heated seats and rear window (SEAT)
75 AInstrument set (METER ACC)
815 AInstrument set (METER IG)
910 ARear wiper (rear door wiper) (R.WIPER)
1030 ACentral locking, electric door lock drive (D.LOCK)
1115 ARear cigarette lighter (connector for additional electrical equipment) (R.CIGAR)
1220 AWipers (wipers) and windshield washers (WIPER)
1315 ALighting (plafonds, lighting) of the interior space and trunk (ROOM)
14Empty (reserved)
15Empty (reserved)
16Empty (reserved)
R1Fuel pump relay (FUEL PUMP)
R2Heater (relay) (Blower)

The cigarette lighter fuse in this version is number 1 with a current of 15 Amps. The socket (cigarette lighter) at the rear is occupied by number 11 for 15 Amperes.

The video below clearly demonstrates the location and replacement of the fuse responsible for the cigarette lighter.

The turn signal (turn signal) relay is also located in the cabin, but it is installed separately, behind the dashboard.


Photo of Mazda 6 gg turn signal relay

Access to it is clearly presented in the video below.

Description of fuses on a Mazda 6 car: location, diagram, price

In Mazda 6, regardless of the generation GG, GH, GJ, knife-type fuses with a melting element in the center are pre-installed.

Relay-breaker layout diagram

DesignationsWho is responsible for what/what provides
K 1Electric air conditioning fan
K2Compressor clutch
K 3Reserved
K 4Starter relay
K5Reserved
K 6Electronic engine control unit
K 7Fog lights
K 8Signal
K9Heated rear window
K 10Electrical supply circuit
K11Fuel pump (gasoline pump)
K 12Reserved
K 13Reserved
K 14headlight washer

Mazda 6 fuse diagram

Marking/amperageWhat he is responsible for (with description)
F (F-1) / 30Signal
F (F-2) / 60Reserved
F (F-3) / 30For headlight washer
F (F-4) / 30Gasoline pump
F (F-5) / 70Air conditioning system
F (F-6) / 20Generator
F (F-7) / 20Reserved
F (F-8) / 30Reserved
F (F-9) / 40ECU
F (F-10) / 30central locking
F (F-11) / 40ECU
F (F-12) / 30Standard cigarette lighter
F (F-13) / 40Headlight washer module
F (F-14) / 40Reservation
F (F-15) / 30Low beam
F (F-16) / 20Windshield washer module
F (F-17) / 20Heated rear window
F (F-18) / 20Reserved
F (F-19) / 30Stability control (optional)
F (F-20) / 25Fog lights
F (F-21) / 25Electric cooling fan
F (F-22) / 25Hydraulic booster pump
F (F-23) / 30Power circuits: diagnostic connector, emergency lights, front wiper, glass washer, central locking, dimensions
F (F-24) / 30Headlights
F (F-25) / 30RTS electrical circuit
F (F-26) / 30Reserved
F (F-27) / 30ABS, stability control
F (F-28) / 30ABS optional
F (F-29) / 30Electronic engine control unit
F (F-30) / 30Reserved
F (F-31) / 30Ignition switch, starter, additional power circuit
F (F-32) / 20Starter solenoid relay
F (F-33) / 30Auxiliary power circuit, ignition
F (F-34) / 30Reserved
F (F-35) / 30Air conditioning system
F (F-36) / 30Reserved

A set of new original modules starting at 3,000 rubles. High-quality analogues from 2300 – 2500 rubles. Individual fuses from 200 rubles.

Fuses in the cabin

The Mazda 6 GH interior fuse box is located on the left side of the dashboard, below the steering wheel, in the side pillar. To access the unit, you need to remove the protective cover by prying it off with your fingers.


General view of the Mazda 6 gh interior fuse box


Fuse diagram in the Mazda 6 gh interior

No. on the diagramDenomination pre-laProtected circuit
130 AWindow lifters (electric drive) (P.WIND IG)
27.5 AInstrument panel illumination (ILLUMI)
3(Reserve)
420 AWipers (windshield wipers) and windshield washer (WIPER)
515 ACigarette lighter front (CIGAR)
615 AEngine control system (ENG IG)
715 AAir conditioning (A/C)
810 AAdaptive cornering side lighting (AFS)
95 AElectrically adjustable side mirrors (MIRROR)
105 AAirbag system (SAS)
1110 ARear window wiper and washer (R WIPER)
1230 AElectric door lock (central locking) (D LOCK)
1315 AElectrical socket for accessories (rear)
1415 AProtection of various electrical circuits (METER IG)
1515 AInterior lighting (shades, light bulbs) (ROOM)
16(Reserve)
17(Reserve)
18(Reserve)

The cigarette lighter fuse is number 5 with a current of 15 Amps. The remaining sockets for additional equipment are protected by fuse number 13. The headlight washer is located in the block under the hood - number 21 for 20 Amperes (see below).

Fuses Mazda 6 (GG), 2002 - 2007

The main part of the electrical circuits is protected by fuses. Consumers such as headlights, cooling fan motor, fuel pump, etc.) are connected via a relay. The information is relevant for Mazda 6 (GG) 2002, 2003, 2004, 2005, 2006, 2007 models. Fuses and relays are located in mounting blocks in the car interior and under the hood.

Sources

  • https://dasauto.tech/mazda/mazda-6/mazda-6-gg/shemy-blokov-predohranitelej-mazda-6-gg/
  • https://avtozam.com/mazda/6/samostoyatelnaya-zamena-predohranitelej/
  • https://AvtoSotka.ru/to/mazda-6-predohranitel-prikurivatelya.html
  • https://charmlink.ru/drugoe/chema-predohranitelej-mazda-6-mestoraspolozhenie-i-sposoby-zameny.html
  • https://zapchasti34.ru/elektrika/rasshifrovka-predohranitelej-mazda-6-gg.html
  • https://ilifia-club.ru/korobka-peredach/shema-predohranitelej-mazda-6.html
  • https://lada-avia.ru/tehservis/predohraniteli-mazda-6-2008.html
  • https://sto-tolyatti.ru/avtomobil-tehobsluzhivanie/shema-predohranitelej-mazda-6-gh.html
  • https://drajver.ru/korobka-peredach/predohraniteli-mazda-6-2008.html
  • https://r-min.ru/chema-predohraniteley-mazda-6-mestoraspolozhenie-i-sposoby/
  • https://TrueScooters.ru/korobka-peredach/shema-predohranitelej-mazda-6-gg.html

[collapse]

Replacing fuse Mazda 6 GJ

This photo report shows how fuses are replaced on a 2016 Mazda 6 (third generation GJ). The instructions may also be useful to owners of such Mazda cars as: Mazda 2, Mazda 3, Mazda 5, CX-3, CX-5, CX-7 and CX-9. Changing fuses yourself is not at all difficult.

The third generation Mazda 6 is equipped with flat, low-profile fuses of a relatively new type. You will also need pliers for replacement; they can often be found under the fuse box cover. If you don't have them, you can get by with small needle nose pliers with rubber handles.

The fuses are located in two blocks - under the hood and in the passenger compartment . The engine compartment fuse box is located behind the air filter housing, near the battery. The fuses in the cabin are hidden near the driver's seat under the instrument panel on the left.

Mazda 6 GH fuses in the cabin

The Mazda 6 GH fuse box in the passenger compartment is located in the front pillar of the driver's door under a plastic casing.

To gain access to the protective elements of the block, you must press the locking latch. Subsequently, the casing moves and extends, applying certain forces.

Fuse block diagram

(link to photo source)
The Mazda 6 GH interior mounting block consists of the following fuses:

  • 1 (P. WIND IG) – electric window lifts (30A);
  • 2 (AFS) – adaptive light program (10A);
  • 3, 12 (D. LOCK) – central locking (30A);
  • 4, 9, 10, 14 (SPARE) – not activated;
  • 5 (ILLUMI) – instrument panel illumination (7.5A);
  • 6 (CIGAR) – cigarette lighter fuse for Mazda 6 2nd generation (15A);
  • 7 (MIRROR) – external mirror position regulator (5A);
  • 8 (OUTLET) – Mazda 6 GH socket (15A);
  • 11 (ENGINE IG) – software control complex for internal combustion engines (15A);
  • 13 (METER IG) – instrument panel (15A);
  • 15 (WIPER) – wipers and front glass washer system (20A);
  • 16 (A/C) – air conditioning supercharger (10A);
  • 17 (R. WIP) – rear wipers and washer glass complex (10A);
  • 18 (ROOM) – illumination of the interior space of the Mazda 6 GH (15A).

https://youtu.be/IBIXYL_6Zyc

Mazda 6 GH fuse box under the hood

(link to photo source)

First, let's determine where the Mazda 6 GH fuse box is located in the compartment under the hood.

It is mounted on the left near the battery. The Mazda 6 GH unit is covered with a protective cover, which is removed after pressing the latch. It includes a relay part and fuses.

Fuse circuit diagram


(link to photo source)
Elements of the Mazda 6 GH mounting block of the engine compartment with fusible inserts:

  • 1 (HEATER) – heating complex (40A);
  • 2 (PTC) – auxiliary heating system (40A);
  • 3 (P.WIND) – electric window lifts (30A);
  • 4 (IGKEY2) – power unit startup program fuse (40A);
  • 5, 34 (BTN, IGKEY1) – electrical circuit protection (40A);
  • 6 (ABS MOTOR) – program to prevent wheel locking during braking (60A);
  • 7, 9 (FAN, AD FAN) – cooling fan of the internal combustion engine radiator (30A);
  • 8 (AUX HEATER) – autonomous heating complex (20A);
  • 10 (PRECRASH) – emergency warning function (50A);
  • 11 (DEFOG) – rear glass heating system (40A);
  • 12 (P. SEAT) – electric seat position adjuster (40A);
  • 13 (A/C MAG) – air conditioner (10A);
  • 14 (OUTLET) – Mazda 6 2 socket fuse (15A);
  • 15, 16, 24, 25, 30, 33, 35, 37 – not used;
  • 17 (S. ROOF) – electric sunroof lift (15A);
  • 18 (S. WARM) – seat heating complex (20A);
  • 19 (TAIL) – control system for interior electrical appliances (15A);
  • 20 (BOSE) – multimedia complex (25A);
  • 21 (H/CLEAN) – headlight washer fuse Mazda 6 GH (20A);
  • 22 (FOG) – PTF (15A);
  • 23 (CLOSER) – central locking (25A);
  • 26 (STOP) – stop lights (5A);
  • 27 (HORN) – warning signal circuit (15A);
  • 28 (EGI) – ICE ECU Mazda 6 GH (5A);
  • 29 (HAZARD) – turn signals, emergency stop light (10A);
  • 31 (S.LOCK) – steering lock (10A);
  • 32 (ENGINE+B) – ICE ECU Mazda 6 2 (10A);
  • 36, 46 (GLOW SIG, GLOW) – Mazda 6 GH spark plugs;
  • 38 (M. DEF) – heating complex for external mirrors (7.5A);
  • 39 (ABS SOL) – stabilization and program to prevent wheel locking during braking (30A);
  • 40, 41 (HEAD LOW R/L) – low beam of the right and left headlights of Mazda 6 2 (15A);
  • 42, 43 (HEAD HIGH R/L) – high beam of the right and left headlights (10A);
  • 44, 48 (INJ, EGI INJ) – fuel injection (15, 10A);
  • 45 (F. PCM) – fuel supply pump (20A);
  • 47 (PCM) – ICE ECU (10A).

Relay


(link to photo source)
The relay part of the unit in the compartment with the internal combustion engine of the Mazda 6 2nd generation ensures the functioning of the following elements:

  • R1 (A/C) – air conditioning supercharger;
  • R2 (EGI MAIN GLOW) – main relay;
  • R3, R11 (HEAD LOW/HIGH) – low and high beam of the Mazda 6 GH, respectively;
  • R4 (STARTER) – starting device for Mazda 6 2;
  • R5 (HORN) – warning signal circuit;
  • R6 (BACK) – rear headlights;
  • R7 (EGI MAIN FUIL PUMP) – fuel supply pump;
  • R8 (OUTLET) – cigarette lighter relay Mazda 6 GH;
  • R9, R10 (FAN, AD FAN) – first speed of the internal combustion engine cooling fan;
  • R12, R13 (FAN 2, AD FAN 3) – second speed of the internal combustion engine cooling fan;
  • R14 (DEFOG) – rear glass heating complex;
  • R15 (AT MAIN STARTER 2) – starting device;
  • R16 (FOG) – PTF Mazda 6 2nd generation front;
  • R17 (DEICER) – windshield heating complex;
  • R18 (HEATER) – heating system.

Mazda 6 gg (Atenza) - fuses and relays

Mazda 6 gg (1st generation) was produced in 2002, 2003, 2004, 2005, 2006, 2007 and 2008. During this time, the model was restyled. Delivered all over the world. In China and Japan it is known as Mazda Atenza.
In this publication you will find a description of fuses and relays of the Mazda 6 gg with block diagrams and photos - examples of execution. Let's highlight the cigarette lighter fuse.

The design of the blocks and the purpose of their elements may differ and depend on the year of manufacture, region of delivery (USA, Europe, etc.) and level of equipment.

Fuse box in the passenger compartment

It is located at the bottom of the panel pillar on the left near the driver's foot.

Diagram

Description

130A P. WIND IG - Electric windows
210A AFS - Adaptive Lighting System
330A D. LOCK - Central door lock
4SPARE PARTS - Reserve
57.5A ILLUMI - Instrument panel lighting
615A CIGAR - cigarette lighter
75A MIRROR — Electric rear view mirrors
815A OUTLET - electrical outlet
9SPARE PARTS - Reserve
10SPARE PARTS - Reserve
1115A ENGINE IG - Engine control system
1230A D. LOCK - Central door lock
1315A METER IG - Instrument panel
14SPARE PARTS - Reserve
1520A WIPER - Windshield wiper and washer
1610A A/C - Air Conditioning Compressor
1710A R.WIP - Windshield wiper and washer for trunk lid
18ROOM 15A – Interior lighting lamps

Fuse No. 6 at 15A is responsible for the cigarette lighter, and for additional sockets No. 8 at 15A.

Fuse box in the engine compartment

Number Amps [A] Description
1 AUDIO

DCDC REG

30 A. Public address system
2 IG2 30 A. To protect various circuits
3 INJECTOR

ENG. SUB

30 A. Engine management system (some models)
4 SCR1

EVVT

20 A. Engine management system
5 P. WINDOW1 30 A. Electric windows
6 IG1 2 30 A. To protect various circuits
7
8 ADD FAN DE 50 A. Cooling fan (some models)
9 DEFOG 40 A. Heated rear window
10 DCDC DE 40 A.
11 EPB R 20 A. Electric Parking Brake (EPB) (Right)
12 EPB L 20 A. Electric Parking Brake (EPB) (Left)
13 CABIN. +B 50 A. To protect various circuits
14 FAN GE 30 A. Cooling fan (some models)
15 ENG.MAIN 40 A. Engine management system
16 ABS/DSC M 50 A. ABS;

Dynamic stability control system.

17 HEATER 40 A. Air conditioner
18 WIPER 20 A. Windshield wiper and washer
19 FAN DE 50 A. Cooling fan (some models)
20 ADD FAN GE 30 A. Cooling fan (some models)
21 ENGINE3 15 A. Engine management system
22 ENGINE2 15 A. Engine management system
23 AUDIO2 7.5 amps Public address system
24 COUNTER2 10 A.
25 SRS1 7.5 amps Air bag
26 COUNTER1 10 A. Instrument panel
27 ENGINE.IG1 7.5 amps Engine management system
28 IN 15 A. Transmission control system;

Egnition lock.

29 H/CLEAN 20 A.
30 Air conditioner 7.5 amps Air conditioner
31 ON THE PUMP 15 A.
32 HORN 15 A. Horn
33 R.WIPER 15 A. Anti-theft system (some models)
34 H/L HI 20 A. High beam headlights
35
36 WIPER.DEI 20A Wiper de-icer (some models)
37 ENG. +B 7.5 amps Engine management system
38 H/D LOW L 15 A. Low beam (left)
39 LAMP 5 A.
40 ENGINE1

ENGINE4

15 A. Engine management system
41 C/U IG1 15 A. To protect various circuits
42 HEATER 15 A. Heated steering wheel (some models)
43
44 AUDIO1 25 A. Public address system
45 ABS/DSC S 30 A. ABS;

Dynamic stability control system.

46 FUEL PUMP 15 A. Fuel system (some models)
47 FUEL WARM 25 A. Fuel heater (some models)
48 TAIL 15 A. Rear lights;

License plate lighting.

49 SCR2

FUEL PUMP2

25 A. Engine management system (some models)
50 GAMBLE 25 A. Hazard lights (hazard lights);

Direction indicators;

Parking lights.

51 B/L LOW R 15 A. Low beam (right)
52 A STORE 25 A. Accessory sockets
53 STOP 10 A. Brake lights
54 NUMBER 25 A. To protect various circuits
Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]