How to make the suspension softer? Debunking myths

home
Car suspension
…

You can often hear from owners of cars of various classes that the suspension of their iron horse is stiff, some say oak. You can literally feel every small unevenness (bump or hole). The comfort in the interior of such a car is reduced, and the thought constantly floats in my head - how to make it softer? So that, as they say, the spine does not fall off onto the seat. And here a huge amount of advice appears on the Internet, which is sometimes simply amazing in its illiteracy. Today we’re going to debunk the myths and also think about real ways to make the suspension more comfortable...

What they don’t write on the Internet is to trim the springs, install other “soft shock absorbers”, ride almost on winter tires (in the summer), etc. I propose to discuss each point separately, but first think about why the suspension can be stiff

What is hard and soft suspension?

The suspension is influenced by a large number of factors:

This is the mass of the body
Body shape, tall or, on the contrary, squat
Dimensions, wheelbase
Speed and power characteristics
Settings

A little theory, let's start with the oscillation frequency. After all, even when walking, it is present, and a person gets used to certain indicators in the life cycle.

The normal vibration frequency of a person when walking is approximately 1 Hz (Hertz). If you apply this to a car: the frequency is higher, it will be harsh, and if it is lower, it can cause motion sickness.

A car also has this parameter, only this is the vibration frequency of the body with cargo and passengers on the suspension.

The achievement of this parameter is ensured by the rigidity of the elastic element and the weight of the body with cargo and passengers bearing on it.

In simple words, the more the body weighs, the more powerful and, accordingly, stiffer the springs should be.

However, one value remains practically unchanged - the static deflection of the elastic element (spring or spring) is 25 cm. This is the difference in the values of the free spring and the compressed one on the suspension (with passengers and cargo). When applied to the wheel, because in some suspensions the springs work directly, and in others through a lever. Accordingly, the lever must be taken into account.

This is ideal!

However, now on modern cars the suspension is made a little stiffer than we would like, let’s go point by point:

With low rigidity it is difficult to achieve high energy intensity . To prevent the soft suspension from breaking through an obstacle, you need to make a large compression stroke. BUT there are two problems here: you can’t make a big move due to restrictions on the body layout (spars or wings simply won’t allow it). And a limitation on the suspension kinematics itself. The suspension works along a radius and with a large compression stroke, unwanted movements of the levers increase, which reduces controllability and increases the load on the elements.

Compression buffers . Probably everyone has heard the concept of “rebound” suspension operation. Some manufacturers, to please the consumer, can install soft springs and shock absorbers with “high compression,” but as a rule, such suspensions easily break through sharp bumps. Therefore, they install so-called compression buffers, rubber elements that limit the stroke. springs and leaf springs have them . BUT if the suspension reaches the “buffer” its comfort is lost significantly.

A smaller, taller and lighter passenger car . The more difficult it is to achieve a smooth ride and, accordingly, a soft suspension. After all, soft springs are required so that they give a comfortable oscillation frequency. BUT there is another problem here, loading the car. After all, if such a machine is heavily loaded, the drawdown will be severe. It is also worth taking into account the kinematics of the suspension, because a small car will have smaller operating radii. But sometimes the car needs to be loaded just as heavily (for example, 4 people + cargo). That's why small cars are often the stiffest, especially those tuned to high speeds.

Anti-roll bar . It is needed to increase the angular stiffness of the suspension and resist body roll when cornering. Helps in kinematics, not to go beyond the maximum permissible points of suspension radius mixing. Also helps with driving.
Air suspension . When installed, almost any car can be made comfortable and soft (from the driver’s point of view), but the cost of the system is prohibitive. And they don’t install it on budget brands

I would like to summarize briefly. On large cars it is easier to make the suspension comfortable. Because the body weight is greater, the wheelbase is longer, there is plenty of space for the suspension to work, and the settings are for high loads and speeds. ON a large car, even huge springs will work better.

ON small, and even tall cars. Often, making a soft and comfortable suspension heavier. For example, I had a FORD FUSION, it was really made of oak (due to the short wheelbase and high body). The manufacturer has nowhere to roam in such a car. That's why they make such cars a little tougher. This is not a whim of the manufacturer, but a necessity.

Now I want to talk about myths that, although on the Internet

Why is timely replacement of struts on a Priora so important?

Reliable products can ensure good stability of vehicles on the road. It is impossible to determine exactly which racks are best to install on the Priora. When purchasing, you need to focus on the type of product, their hardness and recommendations or reviews of other motorists. But if problems arise with control and driving, replacement of elements is mandatory.

Only new spare parts can guarantee driving safety. Worn struts can lead to roadside accidents and more expensive vehicle repairs.

A sudden breakdown on the highway will require evacuation and cause unnecessary costs. Therefore, Priora drivers must be attentive to restoring the performance and reliability of the vehicle in the event of any malfunction of the racks or auxiliary parts.

Trim or install other springs

To cut this at all is some kind of game!

Firstly , there is no 25 cm in a loaded car, which is necessary for comfortable work. Secondly , the work of the suspension will be, on the contrary, torn, and the spring will become a little softer, it simply won’t have enough coils to hold the body normally. The center of gravity of the body will be mixed, which has an extremely negative effect on handling. If you cut off more turns, you will hit the bottom on the road, because again there is not enough spring (let’s say power) to hold the body. YES, the spring can simply fly out of its place.

Install other springs. Hypothetically, this is possible, but they are selected together with shock absorbers (more on this below). But if you make it more powerful, the car will become stiffer, but we need comfort. And if you install it softer than what you had, then the body simply won’t hold up, there will always be breakdowns.

Install other shock absorbers

Despite their similarity in appearance, shock absorbers are categorically different; they can be oil, gas-oil, single-tube, double-tube, etc., you can read more here .

BUT they have different degrees of compression, in simple words - different working strokes. After all, various bypass valves can be installed inside, the performance of which directly depends on their operation. The shock absorber will be softer or harder.

If you use standard springs and install rigid “struts”, then again this will not do any good, the car will become stiffer

If you install soft shock absorbers, then the body will wobble at the slightest unevenness. It’s commonplace that the shock absorber will not support the body.

I repeat once again, you can install other shock absorbers and springs, but it is not as easy as it seems; they need to be selected according to the characteristics of your car.

And listening to experts on the Internet who say “install soft springs and shock absorbers and you will be happy” needs to be driven with a broom. With such tips, you can end up in a ditch on sharp turns.

Replacing struts on a Priora: when is it necessary to repair a car?

Before determining which racks on the Priora are better and more reliable, you should make sure that the elements need to be replaced. There are several main reasons why repair work is required. The best decision would be to visit a car repair shop and examine the spare parts by specialists. You can independently determine the need for installation based on the following phenomena:

1. The car holds the road worse.

2. When turning, vehicles are subject to strong roll.

3. There is a knocking or clicking sound in the area of the racks.

4. Shocks when hitting small holes lead to “jumping” of the car and are transmitted to the cabin.

5. When the body rocked, strong vibration appeared.

Bleeding a car is easy and allows you to accurately identify problems. To perform it, the owner needs to swing the body at the corner front point. The next time you lower the car down, you should release it.

If, after lifting to its original position, the body stops swaying, then the condition of the racks is normal. Otherwise, you need to think about what racks to install on the Priora, and start work as soon as possible.

High tread tires

This is a surer way to make the suspension a little softer. For example, if you have a low tread, 35 – 40 – 45. THEN the car will be a little stiffer.

You can take a disc with a smaller diameter, but with a larger tread of 55 - 60.

Due to the fact that the rubber cord has become larger, the energy intensity will increase slightly, but as practice shows, not by much. If we exaggerate greatly, then only 5 - 7% can be added to smoothness if we measure the noise level in DB.

You can also install less noisy tires , I wrote about this here.

Light wheels

There is also some truth here. You can work with wheels, just like with tires. Again, reduce the diameter of the rim (if you install tires with a larger profile).

And you can also reduce the weight of the disk, and accordingly you can reduce the sprung mass, how well this has a beneficial effect on comfort, not critical, but still.

For example, instead of a heavy stamped wheel, you can put a lightweight forged disk. Sometimes casting is lighter, but you need to look for it; some alloy wheels, on the contrary, are heavier.

With this approach, softness will increase a little, but again you shouldn’t expect miracles.

Choosing racks for Priora: the main differences between modern products

Domestic and foreign manufacturers offer high-quality parts. Standardly installed on the SAAZ oil type product model. Their approximate price is 1800-2000 rubles. They are optimal for driving in urban areas and on minor off-road conditions, and cope well with long journeys along the highway. Travel on uneven surfaces is well tolerated for the first 30-40 thousand km, and then they may require replacement.

The Japanese Kayaba racks have also proven themselves positively. The company has recently appeared on the domestic market, but has pleased customers with both a reasonable price and good quality: the elements cope with both off-road driving and highway racing. They have good stability and are able to absorb strong shocks.

When purchasing products, it is important to study the certificate, since there are also low-quality fakes on the market. A novice motorist who is determining which struts are best for a Priora will definitely like the Japanese elements: they are easy to use and install.

Air suspension

In essence, this is a completely redesigned car suspension, sometimes even working on different principles. Here pneumatic elastic cylinders can be added, which can work perfectly as an additional damper. In general, there are a huge number of buildings, but that’s not about that now.

BUT there are two problems here:

Not all cars have them. Especially for small cars
Cost is usually expensive. A complete set, if you take a domestic car, not China, starts from 100,000 rubles

BUT with this solution, you can achieve softness and comfort.

Air suspension installation

Completely replacing the factory suspension with an air suspension is a radical decision that costs a lot of money.

Installation of air suspension should be carried out in specialized service centers, since for each car model it requires personal installation parameters. Its undeniable advantage is that the driver, by adjusting the air pressure in the airbags, can change the level of rigidity of the car's chassis and its ground clearance.

People's decision

How to decide the comfort of the suspension in garage conditions. Everything is simple, just put one or two bags of sand in the trunk. And lo and behold, the goat that was jumping over uneven surfaces becomes much softer. But why?

Yes, it’s simple, initially the suspension was designed for loaded weight, it’s trivial that it should support this weight (especially on cars with a short wheelbase). As I wrote above, without loading it will be a bit harsh, but as soon as you load it, the mass changes and the suspension begins to work differently, as a rule, it becomes softer.

Now we are watching the video version

I'll end here. In conclusion, I would like to say that manufacturers are far from fools; they do not have the task of making “gear-crushing” cars. If your car has a stiff suspension, then most likely this was done for some reason, or because your car is small, tall, or has a short wheelbase. Either it is dynamic, has a powerful engine (takes turns at 100 km/h and has a maximum speed of 250 - 300 km/h), etc. And thoughtlessly changing characteristics is simply dangerous, think about it.