The cost of K&K Torus discs depends on the radius of the disc itself. The larger the radius, the higher the price of Torus alloy wheels.
- R14 Torus price 2700-3000 rubles per piece
- R15 Torus price from 3500 to 4000 rubles per disk
- R16 Torus price from 4000 to 5000 rubles per disc
- R17 Torus price from 4500 to 5000 rubles per disk
Characteristics of Tori
Wheels R14-R15
- Number of mounting holes 4
- Hole diameter 98 mm
- Central hole diameter 58.5 mm
- Reach (ET) 35 mm
The R14 has a rim width of 5.5mm. The R15 has a rim width of 6.5mm
Wheels R16-R17
- Number of mounting holes 4
- Hole diameter 98 mm
- Center hole diameter 58.6 mm
- Reach (ET) 35 mm
The R16 Torus has a rim width of 6.5mm. The R17 has a rim width of 7mm.
The main color of the Torus is silver, but the R14 and R15 are also offered in white, but the price for white wheels is higher.
Structural features of car wheels
Product design is characterized by the presence of long straight edges, formed by the shape of five spokes and decorative elements located on them. The 16-inch wheel is made by a Russian manufacturer. The disc mounting diameter (DIA) of 58.5 mm is designed for precise fixation on the hub. The offset value (ET) is 35 mm. Fastening is provided by 4 clamps with a diameter of 98 mm. Cone-shaped fixing hole. The silver color creates a calm, laconic appearance of the car. Geometric parameters ensure compatibility with Fiat and Lancia models.
Rules for selecting Torus alloy car wheels
Torus casting may not require replacement for many years, but only if the components are chosen correctly. Most consumers are interested in the diameter, this is a mistake. Alloy wheels "Turus" have many subtleties that affect not only the strength of the product, but also traffic safety. The quality of components determines:
- tire service life;
- hub endurance;
- endurance of neighboring technical hubs.
Mistakes are fraught with force majeure on the road and rapid wear of car components. The main mistake car owners make is purchasing a set of tires that are too large.
Disc offset
In the race to follow trends for non-standard solutions, car owners neglect the advice of specialists. As a result, the rubber is too large and simply begins to wear off on the body of the vehicle. The problem also concerns the negative impact on body elements. And painting a car is an additional level of spending money. When choosing, it is important to consider the operating characteristics and materials. It is important to remember about wheel offset, which can be:
- positive;
- negative;
- zero.
A suitable cast version does not need to be adjusted. Otherwise, after just a couple of days of use, the element will begin to bend, and the car’s handling will become significantly worse.
You cannot save money on purchasing discs. Car wheels experience serious overloads, especially on highways. Economy solutions with positive wheel offset quickly become scratched, cracked and deformed.
Torus branded models are reliable, the main thing is to choose the appropriate size. The company uses high-quality materials designed to withstand the heavy weight of the car and significant mechanical shocks. Experts recommend purchasing a set of 4 wheels at once - tires plus original wheels. This is an expensive option, but the car owner does not have to worry about safety on the road.
Car disk washing
The included parts have a high-quality fastening system and thoughtful design. Also, in order to preserve the discs for as long as possible, you need to take care of the elements. No special care is required; car owners should follow simple recommendations:
- Use only mild detergents when washing your car, without ammonia.
- After a car wash, cast models should be allowed to dry; if there is no time, you can wipe them thoroughly with a soft cloth.
- Water-repellent preparations or polishes can be used. Their use will protect the coating and maintain aesthetics.
Tori discs have proven themselves well. You can buy car parts in specialized stores. If you have any problems with the choice, an expert will definitely help, and the car will be “put on” with the original “Toruses”.
Basic options
In the standard version, the wheels of this car have a relatively small diameter - 13 inches. At the same time, the rubber profile is quite large.
Both of these indicators make this car very suitable for tuning - after all, the car enthusiast can vary the wheel diameter and tire profile size within fairly wide limits (for example, install larger diameter wheels with low-profile tires). This also includes the ability to install a wide variety of disks.
So, how to choose the wheel size for a VAZ 2114? To begin with, we note that without any additional calculations, this car can be equipped with wheels with a diameter of 14 inches and a tire width of 5 to 6 inches (this fact is directly stated in the car’s passport).
Two types of tires can be installed on such wheels - 185/60 R14 and 175/65 R14 (the first option is more preferable). Also, if desired, you can install 15-inch wheels with very low profile tires. True, sometimes such a fact can interfere with passing a technical inspection - after all, the use of wide rims for this car is not recommended (which is also stated in the car’s passport).
Not everyone knows, but the Latin letter R in the tire designation means “radial”, and the number following it is the diameter of the disk, not its radius.
Indexes and calculation
It is also worth considering those situations when there are no suitable tires, but something needs to be installed on the car (or there is a desire for tuning, but it is not known whether the tires you like will fit?).
A direct calculation of the wheel diameter will help solve this situation. In order to do this, let’s first consider examples of the designation of the tires themselves. Let's say we have a 175/70 R13 tire (factory size VAZ 2114).
Its indices mean the following:
- 175 — width (in mm);
- 70 - profile height in relation to width (in percent);
- R13 is the size of the rim for which the tire is provided (in inches).
Knowing this, we begin our calculations: first we multiply 175 mm by 0.7 (that is, we find 70%), we get the profile height of our tire equal to 122.5 millimeters.
Then we convert the diameter of the wheel rim to mm. To do this, multiply 13 inches by 25.4. We get 330 mm.
The last step is to add up our two resulting sizes 122.5 + 330, we get 575 millimeters. This diameter is the standard wheel diameter for the 14 model. Thus, when selecting new tires, you should always carry out similar calculations.
If the resulting amount is equal to 575 mm, or is one or two millimeters more or less, then these tires can be installed. In the case when the result turns out to be much more or much less, then you will have to refuse to purchase such tires - they will either cling when rotating or a very large gap will form.
Discs
Speaking about the possible size of VAZ 2114 wheels, it should be repeated once again that only R13 and R14 are recommended. Wheels with a diameter of 15 inches can be installed, but as a result, road handling may decrease and there may be possible maintenance problems.
If there is a very strong desire to install just such wheels, then it is better to pay close attention to such types of tires as 185/55 R15 and 195/50 R15 (however, in the latter case it is also worth checking whether such a tire is suitable in width Of course, you need to do this before purchasing).
General parameters for all disks on the VAZ 2114
Drilling (bolt pattern) LZ/PCD: 4/98 (number of holes/radius of the circle on which their centers are located)
Center hole diameter (DIA): 58 mm (corresponds to the outer diameter of the car hub)
In our humble opinion, it is better to buy castings for a VAZ 2114 than stamped wheels. Modern alloy wheels can withstand exposure to reagents for several seasons, and are often even cheaper in price than steel wheels.
Is there anyone who races R16 toruses? Unsubscribe
A good one that doesn't dull
by Adminrive · Published 09/30/2014
I changed the radiator on the stove and the antifreeze was like a waste after that
by Adminrive · Published 05/21/2014
What discs are best to buy?
Now let's consider the following question - which wheels are suitable for the VAZ 2114. The answer to it has already been partially given above - wheels with radii of 13, 14 and 15 inches can be installed on this model.
The possibility of using both 13 and 14 disks is directly stated in the VAZ 2114 passport.
As for the materials from which they can be made, the most common options are:
The first discs are the cheapest, made from steel sheet using the stamping method (as is clear from the name). Their advantages include low price, very long service life, high reliability (they do not burst upon a sharp impact, but can only become deformed), and maintainability.
True, despite all this, many car enthusiasts try to purchase wheels of other types. This is due to the very high weight of the stamped “rollers” - it has a very negative effect on tire wear, fuel consumption, the overall handling of the vehicle, and also produces excessive load on the chassis. In addition, stamped wheels often look unsightly and are practically unsuitable for tuning.
They have the following advantages:
- small weight;
- have a positive effect on reducing fuel consumption;
- have a positive effect on the wear resistance of machine components;
- have a positive effect on less tire wear;
- better cooling of the braking system;
- They come in a wide variety of shapes and styles, making them an ideal option for upgrading your favorite car.
Parameters and size of Torus ET30 ET32 wheels on a VAZ
"Torus" is an ideal solution for VAZ. This is a casting that is produced at Russian enterprises, where products undergo quality control at all stages of product creation. This is testing for runout, balance and tightness of the car disk, as well as the integrity of the metal surface. The paintwork on the discs prevents the product from rusting. “Toruses” are distinguished by an interesting design, a large assortment of standard sizes and a choice of colors.
Tires on a VAZ
You can install the following wheels on a VAZ:
- Radius 14. R 14 has practically no differences from 13, the only difference is in the height of the side, so in a deep hole you can damage the disk. When changing elements to a larger radius, the clearance will increase slightly, and the car will hold the road well. Discs R14-R15 have 4 holes for fastening, their diameter is 9.8 cm. The hole in the center has a diameter of 58.5 mm. Offset (ET) - 3.5 cm. The R14 has a rim width of 5.5 mm.
- Radius 15. Alloy wheels R15 “Torus” are available in size 6.0xR15 4x98 ET32 D58.6. Mostly VAZ wheels are used, "Torus" 15 have a product width of 60 mm, bolt pattern - 4x9.8 cm, offset - 3.2 cm, central hole - 58.6 mm. The R15 has a 6.5mm wide rim. Silver casting color.
- Radius 16-17. The silver wheels on the VAZ R16-R17 have a bolt pattern of 4x9.8 cm, the diameter of the central hole is 58.6 mm, the offset (ET) is 3.5 cm. The R16 Torus has a rim width of 6.5 mm, while the R17 has it is 7 mm.
The brand color of Torus is silver, but the brand also offers R14 and R15 in a white design, but the cost of such elements is higher.
Compatibility of tires and wheels Lada Priora
Based on reviews from owners, we have compiled a list of Priora wheel size compatibility:
- On R14 wheels you can install tires with the following parameters: 175/65 R14, 175/60 R14, 175/55 R14, 175/50 R14, 175/45 R14, 175/40 R14, 185/65 R14, 185/60 R14, 185/55 R14, 185/50 R14, 185/45 R14, 185/40 R14, 195/50 R14, 195/45 R14, 195/40 R14, 205/55 R14, 205/50 R14, 205/45 R14, 205/40 R14 and 205/32 R14.
- R15 wheels on Priora are installed with tires: 175/60 R15, 175/55 R15, 175/50 R15, 175/45 R15, 175/40 R15, 185/55 R15, 185/50 R15, 185/45 R15, 185/40 R15, 195/50 R15, 195/45 R15, 195/40 R15, 205/50 R15, 205/45 R15, 205/40 R15 and 205/32 R15.
- R16 wheels on Priora are equipped with tires: 175/50 R16, 175/45 R16, 175/40 R16, 185/50 R16, 185/45 R16, 185/40 R16, 195/45 R16, 195/40 R16, 205/40 R16 and 205/32 R16.
- R17 wheels among Lada Priora owners ; the following tires are allowed: 175/45 R17, 175/40 R17, 185/40 R17, 195/40 R17 and 205/32 R17.
It is important that the total diameter of the wheel is close to the factory value. To understand what tires and wheels can be installed on the Priora, we have compiled a compatibility table. The left one is for the minimum diameter (185/60 R14), and the right one is for the maximum diameter (185/65 R14):
Green indicates the minimum deviation of the wheel diameter (up to 3 mm); Orange indicates a diameter deviation from 3 to 6 mm.
Thus, you can install the following disks on Priora:
- 175/70 R13 , 205/65 R13, 205/60 R13, 225/60 R13, 225/55 R13;
- 175/70 R14, 175/65 R14 , 185/65 R14 , 185/60 R14, 205/60 R14, 205/55 R14, 215/55 R14, 225/50 R14 ;
- 175/60 R15, 175/55 R15, 185/55 R15, 195/55 R15, 195/50 R15, 215/50 R15, 215/45 R15, 225/45 R15;
- 175/55 R16, 175/50 R16, 185/50 R16, 185/45 R16, 195/50 R16, 195/45 R16, 205/45 R16, 215/45 R16, 215/40 R16;
- 175/40 R17, 185/45 R17, 185/40 R17, 205/40 R17;
- 175/40 R18.
Alloy Wheels K&K Torus
- More about the K&K brand
- Dimensions
- Other K&K models
- Other manufacturers
- Select wheels
- Reviews
- Delivery
- Payment options
Lorem ipsum dolor sit amet.
Share with friends
Domestic alloy wheels of the KiK (K&K) Torus modification are offered in a wide range of sizes and color options, which will allow you to choose the most suitable model for any vehicles of Russian and foreign production. A special feature of the K&K Torus model is the use of liquid aluminum alloy in the production process without the addition of other impurities - the low-pressure casting technology used in combination with this made it possible to create a high-strength model that is maximally resistant to corrosion.
Alloy wheels K&K Torus have minimal weight, are resistant to deformation and external influences, and are offered by the manufacturer at a reasonable price - choose domestic quality at a reasonable cost! We will help you buy alloy wheels K&K Torus.
K&K Torus
K&K Torus
On the pages of our online store, we present original alloy wheels K&K Torus made in Italy, Germany. In the current catalog you can select and buy forged or cast wheels K&K Torus. Here we show you an exhaustive selection of models and sizes of K&K Torus disks in stock, in all possible colors and designs.
You can familiarize yourself with the entire variety of model range and available standard sizes of K&K Torus disks. Find out prices for K&K Torus wheels and read reviews left by our customers. We can select all the wheels for almost any car - both for your SUV, SUV class car, and for a passenger car, commercial vehicle, minibus or van.
Particularly popular are K&K Torus wheels for Audi, Bentley, BMW, Cadillac, Honda, Hummer, Infiniti, Jaguar, Jeep, Land Rover, Lexus, Maserati, Maybach, Mazda, Mercedes, Mini, Nissan, Opel, Porsche, Rolls Royce, Skoda, Subaru, Toyota, Volkswagen, Volvo
Select and buy original K&K Torus in Moscow, St. Petersburg, Yekaterinburg, Kazan, Kaliningrad, Rostov-on-Don, Astrakhan, Arkhangelsk, Belgorod, Bryansk, Volgograd, Voronezh, Irkutsk, Krasnodar, Murmansk, Nizhnevartovsk, Nizhny In Novgorod, Novosibirsk, Norilsk, Omsk, Orenburg, Penza, Perm, Pyatigorsk, Smolensk, Stavropol Sochi, Surgut, Samara, Saransk, Tula, Tyumen, Tambov, Ufa, Yaroslavl, Yakutsk and other cities of Russia, Belarus and Kazakhstan, you can, having issued order on our website, or simply by calling the hotline number indicated in the contacts, or the header of our website. We, in cooperation with leading transport companies, promptly, quickly and reliably deliver K&K Torus throughout Russia, Belarus and Kazakhstan. We provide insurance and guarantee the transportation of tires and wheels
Delivery terms
Pickup. The cost of pick-up service is 200 rubles. You can pick up the goods from any pick-up point in our store in Moscow.
Delivery of goods in Moscow is carried out the next day after ordering. Express delivery within 2-3 hours is also possible. If the delivery service is very busy, the period may be increased to 2 days. The delivery time is confirmed by the manager when placing the order.
Delivery throughout Russia is carried out by transport companies: PEK, Zheldorekspeditsiya, Ratek, Business Lines, Baikal-Service and others. You pay for delivery services at the place of receipt of the goods, according to the tariffs of the Transport Company.
Payment options
1. Cash to the courier upon receipt of the goods.
2. Cash at the office upon pickup.
3. Electronic payment via the website.
4. By bank or postal transfer.
5. By bank transfer (for legal entities).
Reviews
Delivery of goods is carried out throughout Russia and the CIS:
1. Russian Post (from 350 rubles and above)
Delivery to all regions of the Russian Federation and CIS countries
2. Transport Companies (from 350 rubles and above)
Delivery throughout Russia and the Republic of Kazakhstan
- TK Energy (nrg-tk.ru)
- TC Business Lines (dellin.ru)
- TC SDEK (www.cdek.ru)
- TK PEK (pecom.ru)
- TK KIT (tk-kit.ru)
3. Pickup
The order can be picked up at the office at Tolyatti, 40 Let Pobedy 38, TD “Malachite”, 1st floor.
The waiting time for sending an order in our online store is approximately 2-7 working days, large orders 7-14 working days. days; color of bumpers, mirrors, body parts, spoilers, etc. 7-14 work. days; sewing covers, upholstery, steering wheels, gear knobs, EVA mats, etc. 7-14 work. days.
During this period, we will send you a tracking number by email. email to track the parcel en route.
White VAZ 2114 on tori
Wheels for VAZ 2114 - range from R13 to R15. However, the 15th diameter requires modifications to the car. Do you need it? If not, and you just want to find out which alloy wheels you can put on your favorite “four”, then choose between R13 and 14. Definitely, it’s optimal to put the “cast” R14. The disk parameters will be as follows - 14/5.5J PCD 4×98 ET 35-40 TsO 58.6. In human terms:
- R14 - cast disk diameter
- 5.5J - rim width
- PCD 4×98 (drilling) - 4 mounting holes, hole diameter - 98 mm
- ET (disc offset) - varies from 35 to 40 (it all depends on what tires you decide to use)
- CO - diameter of the central hole (per hub) - 58.6 mm
So, now let’s look at the ten most popular alloy wheels for the Lada 2114, all of these models are ideal for the car, so you can safely buy and install them. Let us remind you that this selection is for R14. (Some photos taken from the website drive2.ru)
Undoubtedly one of the most popular casting models for the 14th. The KiK company produces high-quality products, and the Torus model is simply revolutionary; owners of VAZ cars of all modifications loved it so much that it has already become the talk of the town. Lada on Torus - this phrase is familiar to any vaz driver. Definitely an excellent casting option, inexpensive and very high quality. The discs hold up well to impacts on potholes, last a long time and are really strong. Pay attention when choosing 14-mm rollers.
An equally popular model with an exotic design, which is why the name of the wheels is just as exotic. They look great on the machine, strong and reliable. For the money it's very reasonable. K&K have long earned the reputation of being a reliable casting company. The color range is very extensive, there are 5 color modifications - starting from pure white and silver, and ending with combined ones - black and white, etc. A great option for a great car. The average price tag is about 2,300 rubles, which, you see, won’t hurt your pocket like German or Japanese wheels. Well, people have no complaints about the quality of the Iguana; this model has quite a lot of positive reviews. Relatively lightweight and, again, easy to wash off dirt.
A classic of the genre of any disc in general is a 6-pointed star with thin rays. It looks elegant and really beautiful. Scud is our Russian manufacturer, we think everyone already knows it. The highest quality disc manufacturing, testing, compliance with all declared characteristics. The most important thing is that they are excellent for our roads, the “rollers” are strong and can withstand impacts well. In terms of money, everything is excellent here too, the average price tag is about 2300 rubles for an R14. Another great option not only for the 14th, but also for Kalina, Priora and Grant. They are also lightweight and easy to clean.
What does a significant increase in wheel size actually do?
The increased wheel width provides greater stability. If the tires on the new wheel are good, the car will grip the track perfectly at any speed. Also, the increased diameter has a positive effect on the stability of the ride on the highway and the passage of small irregularities. Many potholes that previously hampered your comfort will become invisible on new wheels. Also a big advantage is the appearance of the car. Otherwise, all that remains is to list the shortcomings:
- acceleration will be significantly more difficult, since the engine will have to be loaded much more to overcome the resistance of the wider and larger wheels on the Priora;
- fuel consumption will increase for the same reasons; on a car with a small unit, consumption can increase by 30-40%, which depends on the condition of the engine and the type of tire;
- control will be somewhat more difficult, and if you have a power steering, the latter can break down very often, since the load on the system will increase significantly, and this will lead to costs;
- braking may lose its sharpness, you will have to wait longer for the car to stop, the braking distance will increase, and the wear of the brake pads on the car will increase;
- the cost of tires will increase significantly, since 17 tires often cost twice as much as rubber on stock 14 wheels, which will greatly affect the operating budget of the car.
These are the kind of troubles that can await a person who decides to change the wheels on a Priora to 17 inches. The same applies to 16 disks, which give approximately the same results. If you want to avoid such problems, but still increase the wheel size, you should buy 15-piece alloy wheels with the same tire width and approximately the same final diameter. That is, the height of the rubber profile should be slightly less than on the stock size.
How much do Tori disks cost?
The cost of K&K Torus discs depends on the radius of the disc itself. The larger the radius, the higher the price of Torus alloy wheels.
- R14 Torus price 2700-3000 rubles per piece
- R15 Torus price from 3500 to 4000 rubles per disk
- R16 Torus price from 4000 to 5000 rubles per disc
- R17 Torus price from 4500 to 5000 rubles per disk
Characteristics of Tori
Wheels R14-R15
- Number of mounting holes 4
- Hole diameter 98 mm
- Central hole diameter 58.5 mm
- Reach (ET) 35 mm
The R14 has a rim width of 5.5mm. The R15 has a rim width of 6.5mm
Wheels R16-R17
- Number of mounting holes 4
- Hole diameter 98 mm
- Center hole diameter 58.6 mm
- Reach (ET) 35 mm
The R16 Torus has a rim width of 6.5mm. The R17 has a rim width of 7mm.
The main color of the Torus is silver, but the R14 and R15 are also offered in white, but the price for white wheels is higher.
