Currently, vehicle theft is one of the most common crimes. A car, regardless of what brand it is, where it is stored and how much money has been invested in ensuring its safety, makes the owner constantly nervous and afraid of theft. To protect your car to the maximum, you should make sure that the alarm system with auto start is installed correctly.
In the process of protecting a vehicle, these devices are very popular. Alarms of this type are activated if certain problems arise with the machine. This may be a situation when a shock sensor, a microwave sensor, was triggered, or the trunk or door was opened.
Modern alarms with auto start are the optimal protection for cars against theft. It is for this reason that you should not neglect the installation of a protective device. It is worth contacting the service center employees or doing the installation yourself.
How does autorun work?
The alarm system is an electronic system that consists of a block with contact groups. It is used to connect wires, as well as a key fob, which serves to transmit a control signal to the unit.
When a signal from the key fob is sent, the system reads the code received from it and simulates a normal car engine start, namely:
- the car's ignition is turned on;
- the clutch is removed and the starter is cranked;
- the system monitors engine starting;
- After the engine starts, the starter stops.
Most modern car alarms have a so-called intelligent autostart, in which the system repeats the start of the starter and increases its operating time if the engine does not start the first time.
After starting the engine, the system turns on programmed functions, such as heated glass, steering wheel, interior heating or air conditioning, etc.
Best modules
Today, the market for auto parts, accessories and electronic systems offers a wide selection of autostart modules. Among other modifications, it is necessary to highlight AlarmStart GSM. Such a module costs 29,900 rubles. This is a universal kit that allows you to activate the internal combustion engine using a key fob or mobile application. The system is completely autonomous and does not require integration with an alarm system. It works independently of different automotive technologies. You can launch such a module with a phone call. Commands are also received via SMS messages.
Car owners will be able to activate the function by pressing the corresponding button in the mobile application. AlarmStart GSM also has a programmable timer, which can be adjusted depending on the wishes of the owner. This kit is suitable for any make or modification of car.
No less interesting is the AUTOLIS Mobile
(RUB 29,600). This module is equipped with an Italian-made GSM modem. It is necessary to note the presence of a voice interface. Consequently, owners of this kit will be able to give voice orders. Has equipment and an SMS alert option. Commands can be issued online.
The module is reliably protected from hacking attempts via GSM communication. The same GSM system is responsible for setting coordinates while moving through unfamiliar terrain. You can control such a module using any modern gadget.
The module is configured according to the individual needs of the car owner. Each user will be able to choose the method of notification and autostart of the internal combustion engine. Performs a set and function of a car alarm. It will notify the car owner of any danger in the shortest possible time.
StarLine S96BTGSM
– another functional solution to the problem with remote autostart of vehicles. This security and telematics complex was developed in 2022 and is in great demand on the market. It will cost car owners 10,990 rubles. Using this module, launch can be done in the following ways:
- From a smartphone;
- BluetoothSmart;
- GSM interface;
- Interfaces 2CAN+2LIN.
This kit can be installed quickly and absolutely safely. It should be noted that the module is extremely energy efficient. With this equipment, the driver will be able to monitor the condition of the car remotely using a mobile application. In addition to starting the internal combustion engine, the interface can also be configured for heated seats, auto glass or steering.
Among the autonomous engine autostart modules, it is necessary to highlight Data StartVW (RUB 12,500), which is programmed online. Most often, such kits are installed by owners of Volkswagen, Skoda and Audi. On sale you will find two versions of this kit. The first one comes with a remote control. And the second one has a one-button analogue. Devices communicate with the antenna via a reliable channel. AES-128 encryption is used, which eliminates system hacking and car theft. Such a kit can be installed in conjunction with an alarm system or independently.
When choosing remote engine start units, you need to pay attention to the domestically produced Autostart module. This kit costs only 3990 rubles
It is produced by the company, which has been producing protective systems for vehicles for more than 10 years. In order for the engine to start using such a module, the driver needs to press Lock four times. The kit is easy to use. And it is installed very easily, without the involvement of specialists. You just need to connect the wires correctly.
Conclusion
Modern autostart modules for internal combustion engines help to achieve the optimal operating temperature of the entire vehicle and prepare the interior for the driver and passengers. They differ in their functionality, reliability and durability. In the winter cold, such systems are responsible for warming up the main unit of the vehicle, and in the summer heat they help cool the interior by starting the air conditioners.
However, we should not forget about the increase in energy and fuel costs when installing such units. Excessive fuel consumption is a serious problem for most car owners. Therefore, it is better to make the final decision on installing such equipment taking into account all the positive and negative aspects.
Video about autostarting a car engine:
Availability of autorun function
All modern car alarms have an autostart function, which can be activated directly by yourself or by programming the key fob. Like any system, this function has its advantages and disadvantages.
Advantages
Having understood the main features of the automatic start of a car alarm, you can appreciate all the advantages that such a function provides. Among the main positive factors are:
- The ability to go out in the morning to a fully warmed up car. This allows you not to freeze in the car, but to leave the entrance, get into the car and immediately drive.
- Significant time savings, which is so important for a modern person. Using the autostart option will allow you to avoid wasting time waiting for the engine to warm up to operating condition.
- The driver is guaranteed to be able to drive his car even in severe frost. If you set autostart in a certain mode, the engine will start when the temperature drops to the programmed parameter.
- Significant reduction in possible wear of parts, which significantly increases the overall engine life.
Along with the positive aspects of using an automatic alarm system, it is worth noting some disadvantages of its use.
Flaws
The most important disadvantage is the increased fuel consumption. In the cold season, the engine will have to be started several times a night, which will waste additional fuel.
Another disadvantage is the possibility of draining the battery. During the process of starting the starter, a fairly large amount of current is consumed, as a result the battery may be discharged a little faster than expected.
In order not to be faced with a failed battery in the morning, it is important to configure the system correctly. It is necessary to allow the motor to run for about 15 minutes so that the charge is fully restored.
This is interesting: How to choose and install Chevrolet Cruze wipers
The main purpose of the alarm is to ensure the maximum level of comfort during the operation of the car. For this reason, all the pros and cons should be considered in this spectrum. With the right approach, all disadvantages can be significantly reduced. The main thing is to know how to start a car from autostart correctly. You can’t fix only increased fuel consumption, but as you know, you have to pay for comfort.
Precautionary measures
To ensure your safety, you should make it a habit not to leave your vehicle at speed. Otherwise, the autostart, assembled with your own hands, will start the engine, the car will start moving, since the gear is engaged. It is better to have a good handbrake, but it is not recommended to use it in winter. In addition, please note that you must block all incoming calls. This measure was discussed in detail above. All electrical networks must be protected with fuses.
All power circuits of the electromagnetic relay windings must be connected to the battery only through fusible links. This will prevent a fire if a short circuit occurs. However, if you use a car alarm, all protection devices are included in the installation kit. It is also worth noting that starting the engine yourself using an alarm with feedback is the most reliable and reliable option. And the cost will not be too expensive.
There are a lot of autostart control systems, but choosing the one that is ideal is quite difficult. Try to analyze the costs of different designs. A do-it-yourself engine auto-start module can contain either an alarm system or a cell phone. The last option turns out to be the most suitable. Especially if you have an unnecessary phone that can receive calls.
The only costs are the purchase of relays, wires and a SIM card. But there will be much less hassle with the alarm, since in this case it is used for its intended purpose. The only thing that needs to be done is reprogramming. And this is not always necessary, since usually the time of closing the contacts of the second channel is enough to ignite the air-fuel mixture in the combustion chambers. And the engine starts in less than one second. In some cases, the time increases to three. It’s easier to autostart the generator yourself, but you’ll have to carefully study the connection diagram to avoid mistakes during installation.
Installing an Alligator alarm on an audio) The material is generally useful for all B5 owners. The connection points are the same for virtually everyone. (Just a couple of exceptions) Useful links: -One of the best reports. Alarm Cenmax - Also a small report Connection points to the wiring, tables Drive2. Installation Alligator. Already with diagrams
Start. The alarm unit includes 3 main chips with wires. This is alarm control (limit switches, sensors, etc.), door LOCKS control and auto start control. You can connect one at a time so as not to get confused in this heap of wires.
1 Alarm control: This includes a siren, temperature sensor, limit switches, warning lights, autostart control input (tachometer or generator or oil sensor), as well as 3 more channels to which -200Ma can be supplied. I sketched out the connection in the form of a diagram.
2 door lock control Diagram. There are only two wires to the locks, the control is negative.
3 connecting autorun I took a diagram from one of the reports written earlier by users and added it a little.
4 Bypassing the immobilizer There are several options. You can install a crawler by registering one key and sticking it there, or you can rip the capsule off the key and tape it to the ignition switch approximately in the place where it points when the key is turned. In the first case, there will be difficulties with theft, in the second case, the car can be started with a blank)
5. Location of sensors and components. Siren
it must be placed in the engine compartment, in a place that is protected from high temperatures and water.
The temperature sensor
must be placed in a place protected from moisture but as close as possible to the engine in order to have a minimum error in temperature. I put it under the plastic engine cover.
I connected the wires with regular twisting, because, as I found out, my soldering skills are very poor and it’s inconvenient to climb there to solder. I simply wrapped the places where they cut into the standard wires thickly with electrical tape. I covered the junctions of the wires with heat shrink. Under the hood, all the wires that go into the interior were put into special corrugations.
Done, alarm is on. We check the functionality of all nodes. All that remains now is to SET IT UP.
6 Setting up the alarm This is done programmatically according to the instructions and is MANDATORY, it is important to do this specifically for autostart, otherwise the car will not behave correctly, become dull and stall when you try to start it remotely. We enter the program mode using the book that comes with the whitefish. Set the settings as follows: Monitoring engine operation using a tachometer signal
(if you threw a signal wire on it, and I would advise you to hook it on it)
Manual transmission
(respectively, if you have a stick) After you have set the settings and started the car, press and hold the Valet button for 5 seconds so that the system is memorized I wrote down the tachometer revolutions. The beacon will blink when the system is finished. Thanks to the people who explained some details. All
