Lada Granta windshield wiper blade parameters: size, photo

Granta » Maintenance and repair
Does your windshield wiper scrape obnoxiously on the glass, moves jerkily and leaves uncleaned streaks? These are signs of severe wear on the wiper blades.

Below - about wipers for LADA Granta: what size are the standard spare parts, what can replace them, and also about how to change them yourself.

What are wipers and when should they be changed?

Windshield wipers are a device in which a metal arm is connected to a rubber wiper surface. The wiper blade is secured to the lever with a special holder with a plastic plug. They come in two varieties: framed and frameless.

Frame brushes have moving parts called rocker arms. They hold the cleaning surface on the windshield. The fundamental disadvantage of such “wipers” is the presence of hinged joints, which are vulnerable to the ingress of snow and ice, which disables the wipers. In addition, the rubber brush often does not adhere tightly to the glass, which makes its work ineffective.

Wiper frame design

Frameless wipers have a spring instead of rocker arms, which presses the blade to the surface of the windshield. Such windshield wipers look more organic in appearance, clean the glass better and do not wear out so quickly. You can recognize them by the characteristic curve of their shape. Windshield wipers of this type are installed on most modern cars and have the following advantages:

• They look much better.
• Can be used on glass of any curvature;
• They do not impair the aerodynamic properties of the body.
• Less sensitive to icing.
• Does not interfere with the view when folded. Frameless design wiper

At the same time, it is not possible to replace only the rubber part in such “wipers”; you will have to change the whole thing. Often, a frameless windshield wiper needs to be selected for a specific car model based on the length of the blade and the curvature of the windshield.

Frame, frameless, combined

What a “frame wiper” is is clear to everyone: the design of the unit uses a metal frame. The role of the frame can be performed by a narrow strip made, for example, of plastic. And then the structure is called frameless (see figure). By the way, the plastic itself can differ in rigidity, and it is also sometimes reinforced.

Three types of wipers

Hybrid or combined designs use a frame and a plastic strip (bottom picture). In general, a hybrid differs little from a frame wiper: the height is reduced, other characteristics are the same. So, there is no need to delude yourself about the use of “hybrid wipers”.

If the frame brush does not clean one corner or another part of the surface, the same will happen with the “hybrid”.

Winter brushes

If tourmaline is added to rubber, such material will be good at removing oil films. And if the wiper frame is covered with a cover, this will protect the structure from ice. This means that, in general, winter brushes are frame brushes with a plastic cover.

“Winter wipers” can only be frame ones

And for some reason it is believed that it is necessary to clean glass from oil products in winter.

The disadvantages of winter windshield wipers are listed below:

• Availability of a frame (required);
• Increased weight of the structure;
• High price.

In theory, any winter brush is also suitable for summer. The main thing is not to use frameless brushes in winter, since they are not intended to fight ice.

The many faces of U-Hood

Some brushes compatible with the U-Hood (J-Hood) mount have a tricky lock: to loosen the mount, you need to bend the lever. This lever itself is difficult to immediately notice (Fig. 1).

The main element is the lever

Side buttons

To tilt the lever at least to some angle, you must first squeeze two buttons (Fig. 2). So, the sequence: squeeze the buttons, tilt the lever.

Alternative to factory brushes

As mentioned earlier, the size of the wipers on the Lada Granta, which just left the factory, is 4.1 cm and 6.0 cm. But they can be replaced with other brushes that have a slightly different size. Namely:

1. 6.0x4.0 cm is the most popular version of windshield wipers.
2. 6.5x4.0 cm is a fairly good option, due to which the triangle of dirt at the bottom of the windshield will be minimized.
3. 6.0x4.5 cm. This option should only be used if you are installing frameless brushes.
4. 6.5x42.5. By purchasing such brushes for your Lada Granta, you can completely get rid of the ill-fated triangle.

Thus, it becomes clear that the total length of both wipers should not exceed 105 cm. It should be noted that in the last, fourth version of the brushes they can come into contact with each other. However, in practice this does not happen, since the left brush is always above the right one.

Brush sizes

• according to the technical manual, the size of the driver's wiper is 600 mm;
• The size of the passenger cleaner is 410 mm.

Alternatively, you can use longer windshield wipers:

1. On the passenger side, you can install a longer wiper, its size should be no more than 450 mm, this will allow it to engage a larger amount of surface.
2. As for the driver's brush, it is better not to experiment here. For example, if you install a 610 mm wiper, this will cause it to touch the car body during operation, and accordingly, a knock will appear (video author - TheLadaKalina 2).

Alternative sizes

It is clear that they are trying to increase the size of the brushes, not decrease them. Let's look at what happens as a result:

• 60 x 40 is the most common option;
• 65 x 40 is a good alternative. The “triangle” at the bottom between the brushes will be reduced to the limit;
• 60 x 45 – use this option only if you are installing frameless frames;

Brushes 60 x 45 cm

Probably, the reader managed to understand the main idea: the total length of the brushes should not exceed 105 cm. In the latter version, by the way, one “wiper” can come into contact with another. In practice, this does not happen, since the “left brush” is located above the “right”.

The most extreme combination used in reality is 65 x 43!

Reviews

Types of wipers

There are two types of wipers for the Lada Granta:

1. Frameless. Such products are better pressed against the surface of the windshield, which allows for better cleaning. Due to the absence of a frame, such devices practically do not freeze during the frosty season, which greatly simplifies their operation in winter. In addition, when operating at high speed, frameless products produce an order of magnitude less noise.
2. Frame. This option is older, since it was previously widely used on many cars. Their cost is lower, but they are equipped with a frame, which in any case will freeze during cold weather. However, products of this type tend to cause less damage to the surface of the windshield, since they are not pressed against it as tightly, unlike frameless options.

There is also a hybrid version of the product, but it has the same characteristics as frame wipers, so we do not recommend choosing it. The most technologically advanced option is frameless products, but their cost is higher (the author of the video is the remgar channel).

Quick comparison

I offer brief recommendations for wipers. Choose what is more important to you and buy. A detailed description, installation video and price comparison are below.

Types of wiper blades

Once you have determined the cause of the problem and are sure that the windshield wiper blades need to be replaced on the Lada Granta, you can go shopping for a new part. Now in stores you will find a huge variety of brushes. But they are all divided into two types: framed and frameless.

Frameless blades adhere more tightly to the glass, and thus clean the windshield better. Also, wipers of this type practically do not freeze in the cold. And they are also practically silent, even when operating at high speed.

Lada Granta frame brushes also have many positive aspects. Firstly, they damage the glass less, since the level of pressure on the windshield is less. Secondly, with strongly curved glass, frame wipers clean a larger area than their frameless counterparts. Thirdly, frame brushes are much cheaper than frameless ones. Installing windshield wiper blades on a Granta will cost the same, regardless of the model.

Wipers for Lada Granta

Buying windshield wipers for Lada Granta is not difficult. Only two generations have been released since 2011. The body has changed minimally in its dimensions. The windshield is the same one used. Therefore, the length of the brushes has not changed at all. The second generation is distinguished by the presence of a rear brush.

Well-functioning windshield wiper blades on the Lada Granta are the key to safety on the road. Since the view through the windshield provides visibility. It is important to choose wipers that are suitable not only for the type of mounting. But also in its length. Long brushes cause damage to paintwork. Separately, it should be noted: AvtoVAZ has not produced brushes independently for a long time.

Signs that require replacement

To determine whether the brushes are worn out and the need to replace them, you should remember these signs.

1. Darkening appears on the windshield. Here you should pay significant attention to the degree of cleanliness of the glass, which directly affects driving safety. If such a factor (darkening) occurs, then further movement is prohibited. The cause of the darkening may be a low-quality detergent. Another factor causing this phenomenon may be the deformation of the rubber band, causing the angle of the edge on the wiper to shift.
2. The presence of large stains of dirt on the surface of the glass. This may be caused by the icing effect of the brushes themselves or wear of the working area, which leads to a decrease in efficiency. Perhaps the fact is that the size of the wipers is not suitable.
3. The effect of “jumping” of the blades, which occurs due to an increase in the lifting force of the windshield wipers. An increase in the speed of movement of the windshield wiper blade inevitably leads to the fact that it simply “jumps” over areas on the windshield.
4. The presence of narrow stripes on the surface of the glass caused by the operation of the wipers. Among the reasons you can find dirt stuck to the wiper or excessive wear of the working edge.

Verdict

Choosing the best winter wipers based on reviews for 2022 is a smart decision. Based on data analysis, the sheathed frame structures Alca Winter and Maruenu Gyraless Snow win objective superiority. These brushes work for two or three seasons without any complaints.

Products from Lynx and Goodyear serve no more than two winters well, but they tend to squeak even from the packaging. The rest of the brushes barely survive one season. The model from Champion is not well thought out: the fastening is only under the “hook” and no adapters will help.

The winter season is not the most comfortable for a motorist. If the car is parked in the open air, then heavy precipitation in the form of snow can immobilize the vehicle for a long time.

No less dangerous is the icy surface of a car after rain. Ice crust can damage not only the paintwork, but also other parts. Rubber products, such as windshield wiper blades, are especially damaged.

The physical properties of ordinary rubber at subzero temperatures differ significantly from its behavior in summer, therefore, to ensure effective operation of such products in winter, you should choose wiper blades with special additives.

Which windshield wiper blades are best to install on a car in winter can be difficult to figure out on your own. To shed light on this topic, this article has been created, which will describe the main types of windshield wiper blades, as well as the basic rules for their selection.

How to choose the correct wiper size?

For the Lada Granta model, regardless of its level of equipment, windshield wipers have identical sealing parameters: 600 mm for the product installed on the driver’s side and 410 mm elements on the passenger side. We talked about the fact that the size of the wipers needs to be chosen carefully.

Now there are products on the market from unscrupulous manufacturers. These entities indicate the standard parameters of the blades on the packaging, but the packaging contains products whose wiper blade sizes differ from the declared values. To avoid an unpleasant moment, it is necessary to invite the seller to jointly measure the actual parameters of each of the brushes in the kit for the LADA Granta model.

If the buyer purchased components with a parameter that differs from the regulated value, then there is a risk of poor quality cleaning of the glass after installation. This is due to the varying degrees of down force created by the wiper, which depends on the size of the wiper blades. If there is a specimen with an overestimated length, then its clamping value will be greater, which will negatively affect the service life of LADA Granta glass. On the contrary, windshield wiper blades with a shorter length do not have sufficient pressing force, which will negatively affect the quality aspect of cleaning.

What happens if you choose the wrong size wipers?

Replacing Lada Largus windshield wipers: how to change windshield wiper blades
If the size of the Lada-Granta windshield wipers is chosen incorrectly, the service life of the blades will be reduced, and this will also entail a lot of unpleasant moments. This applies even to deviations from the standard length of 10–15 mm.

How to understand that the length of the wipers is chosen incorrectly:

• The glass is difficult to clean even after prolonged operation of the wipers. Ideally, the brush should clean the windshield in an average of three passes over it. The quality of cleaning decreases when the wiper is not pressed tightly against the glass.
• During operation, the brush touches the rubber seal on the windshield and cleans in stripes.
• During operation, the wipers (right and left) touch each other and slow down movement, and accordingly affect the driver’s viewing angle. This indicates that the wiper blades are too long. Sometimes long brushes can even touch the driver's door, which is accompanied by a knock.
• Wipers that are too small clean a small area of ​​the windshield, reducing visibility through it, especially on the driver's side.

The quality of road visibility is one of the key factors in safety and accident prevention. Almost every third driver faces the problem of poor-quality windshield/rear window cleaning.

In sunny weather this is not as important as in rain, fog, snow, when every second counts. The most common defect is the formation of “islands” of dirt in the center and edges of the windshield

When driving in a straight line, visibility is not hampered, but when you start to turn, you feel all the “charm”. There is only one solution to the problem - replacing the Grant liftback wipers, even despite the actual absence of defects or damage.

Optimal size

The standard size of the Lada-Grant windshield wipers on the windshield, which is indicated in the instruction manual, is 60 cm on the driver’s side and 41 cm on the passenger’s side. At the same time, on the left (driver's side) the maximum size of the brushes is indicated. If you set it even 1 cm more, the wipers will knock and fail faster. On the right passenger side it is possible to increase the length of the brushes. The maximum length in this case will be 45 cm.

Most often, when replacing, drivers prefer to choose a longer wiper on the passenger side as it cleans the windshield better. The price in this case differs slightly.

Other parameters of Lada Granta:

Possible sizes of windshield wipers on the driver's side for Lada Granta of all years of production.

Data in inches.

Possible sizes of windshield wipers on the driver's side for Lada Granta of all years of production.

Data in inches and (mm).

Disclaimer: Although the data represents official manufacturer figures, the information above is for reference only and is not guaranteed to be completely accurate. For cars of the same model manufactured for the USA, Europe and Japan, the size of the wipers may differ.

Recommendations for selection

Let's consider several product manufacturers:

1. Frameless Bosch Aerotwin. Belgian-made products are equipped with native fastenings; the main advantage is a long service life, as well as aerodynamics and the absence of extraneous sounds during operation.
2. SWF VisioNext - also of the frameless type, equipped with a hook type mount. The products are manufactured by Valeo, which also produces many other types of components and parts for cars.
3. Bosch Twin Spoiler frame brushes. Dimensions fit standard Granta windshield wipers. Despite the fact that the products are frame, they are quite reliable and have a long service life.
4. Champion Aerovantage. This manufacturer has been on the market for quite a long time, during which time it has been able to win the trust of many of our compatriots. The products belong to the premium segment of the market and are equipped with a steel frame.

Wipers for Lada Granta dimensions

Foreign manufacturers indicate the length of the windshield wiper in inches, so the suitable length for a passenger blade is 16″. Sixteen inches - 406 mm, probably because of this, brushes with lengths of both 40 and 41 cm can be installed on the right side of the Granta. If desired, you can install a passenger windshield wiper up to 45 cm, but I would recommend staying in the range of 400...410 mm.

I have added brush article numbers to the selection: they will help you find specific products in stores that sell auto parts (this is faster and, most likely, cheaper). Also, the articles will allow you to avoid compromises in the form of several centimeters in the length of the brushes - choose only what is made specifically for your car.

Finally, a comparison of prices for windshield wipers.

Frameless wipers on Granta

An excellent option is the Bosch Aerotwin kit (code - AR601S, article number - 3397118907 ). This is a set of brushes with a length of 600 and 400 mm, which are produced in Belgium, with a “native” and single fastening. They clean perfectly, do not creak, are durable, and aerodynamic. Read more about the Bosch Aerotwin line.

SWF brushes : 600 mm (code - 860, article - 119860 ) and 400 mm (code - 840, article - 119840 ). These wipers are also designed to be mounted on a “hook”. SVF is part of the Valeo group; windshield wipers are produced in Poland and France. Read more about SWF wipers.

An available option is two brushes from the St. Petersburg company Horse Ballistik, 60 and 41 cm. When installing, you will have to use an adapter for attaching the “hook”. If you are offered a choice when purchasing, take the option with a rubber tape - it squeaks less.

Hybrid wipers for Granta

Denso Hybrid brushes : 600 mm (article - DUR-060L ) and 400 mm (article - DU-040L ).

Denso wipers are a modification of frame windshield wipers, covered with an aerodynamic casing on top.

Therefore, they are more affordable than most frameless competitors, but they look impressive, clean well, and are made in Korea. Read more about Denso's line of hybrid wipers.

Frame wipers for Granta

Pay attention to the pair of single Champion Aerovantage wipers: 600 mm (article - A60/B01 ) and 400 mm (article - A41/B01 ). Champion Aerovantage - premium quality brushes with a full metal frame.

A good option is a set of frame wipers Bosch Twin Spoiler 601 S (article - 3397010297 ), which can accommodate a pair of 600+400 mm. Reliable frame wipers with spoiler, made in Belgium.

Radiator grill VAZ 2107 chrome

Finally, I would recommend perhaps the most inexpensive frame windshield wipers with a famous brand - a pair of Bosch Eco : 60C ( 3397004673 ) and 40C ( 3397004667 ).

Price comparison

How to install brushes on Granta

Watch the video on how to install Bosch wipers correctly:

And here is a video on installing Champion wipers:

Replacement options

It is not difficult to purchase high-quality brushes in the store - analogues. It is only necessary to note: it is worth choosing parts from well-proven brands. All presented modifications can be divided into categories:

• frame;
• frameless;
• hybrid;
• winter.

Frame

They are a classic design. An important advantage is low cost. The downside is the low contact ability at high speed. After 80 km/h the brushes practically stop cleaning. The reason is simple: the air flow lifts the cleaning surface above the glass. Which leads to poor contact. As a result: precipitation and dirt are not removed from the car.

Frameless

They are a good alternative to classic solutions. But it should be noted: they cost a little more. The brush itself is made from a single piece of rubber. This allows the air flow to easily flow around the structure. Therefore, even at a speed of 140-190 km/h, there are no problems with cleaning. But frameless brushes are characterized by low strength.

Hybrid

Hybrid ones do not have the disadvantages of frame and frameless brushes. But they have their advantages:

• good aerodynamics;
• stylish design;
• strength.

Like frameless ones, they are made from a single piece of rubber. But there is a metal structure inside. Making the brush more rigid. This allows you to worry about damage without worrying. These models are distinguished by their durability. Even with intensive use, they will survive 2-3 seasons.

Common Mistake

Installing frameless brushes, especially the budget range, does not always lead to the desired results. At speeds up to 60 km/h, the windshield wipers work perfectly, up to 80 - passable. And then, if you drive along the highway faster than 90 km/h, the blades no longer adhere to the surface of the glass - they “fly up”. Although everything looks great from the outside. More details in the material: front wipers are poorly cleaned!

Frameless wipers 40 and 60 cm

Frameless wipers 41 and 60 cm

Let us remember that here we were talking specifically about frameless ones. Perhaps our criticism will not be relevant for expensive solutions.

Right windshield wiper blade

How to change the rear ones

Rear wipers are also installed on hatchbacks and station wagons, since the rear window in such cars is quite large and gets very dirty, and a good view through it is also important.

The design of the rear wiper mounts is very different from that of the front ones. It is impossible to give universal advice here, since the rear wipers are mounted differently on all cars. Let's take the Kalina station wagon as an example.

The sequence of actions in this case is as follows:

Fines for crossing the stop line and speeding will no longer bother you!

1. It is necessary to lift the protective metal cap of the wiper, under which there is a fastening nut.
2. Take a 10mm wrench and unscrew the nut. Please note that there is a small washer under it to prevent it from being dropped. Slightly turning the wiper, pull it towards you and it can be removed without much difficulty. Now you need to remove the brush itself.
3. With the wiper removed, you need to pull the blade, and at the same time, use a screwdriver to slightly release the latch that holds it to the lever. The brush will come off. You can change it as described above.

When purchasing new wipers, it is important not to make mistakes with the size and compatibility of the mounts. Please note that self-installation of frameless brushes on a car with frame brushes requires a special adapter. You need to pay attention to the shape of the bend of the brush, as it affects the efficiency of cleaning the windshield. It is advisable to treat new brushes with soapy water before use.

Windshield wipers rightfully belong to the car safety system, including the Lada Granta, since they allow you to remove foreign formations from the surface of the glass, such as mud deposits, dust spots, snow or streams of rain. This allows you to achieve sufficient visibility of the road and guarantee safe movement, especially in deteriorating weather conditions. Therefore, the size of the windshield wiper blades is no less important than other parameters.

Front windshield wipers for LADA VAZ Granta [2191] Liftback

Windshield wiper blades Bosch Aerotwin AR601S Product rating 41 reviews Manufacturer Bosch Read more"> Bosch Aerotwin series Frameless design Read more about the benefits."> Quantity per package 2 Length 1, mm 600 Length 2, mm 400 Spoiler Asymmetrical Find out which ones."> Fastening Hook 9×3, 9×4 Country of origin Belgium 1,690 RUR 1,572 RUR

save 118 ₽ Buy

in stock

Windshield wiper kit Bosch Twin Spoiler 601S

Product rating 1 review Manufacturer Bosch More details»> Series Bosch Twin Spoiler Design Frame Quantity per package 2 Length 1, mm 600 Length 2, mm 400 Spoiler Driver Mount Hook 9×3, 9×4 Country of origin China 1,400 ₽ 1,302 ₽

save 98 ₽ Buy

in stock

Windshield wipers Trico ICE 600mm + 400mm

Product rating 158 reviews Manufacturer Trico (USA) Read more"> Trico ICE series Frameless design Read more about the benefits."> Quantity included 2 Length 1 / length 2, mm 600 / 400 Spoiler Asymmetrical Find out which ones."> Fastening Hook 9× 3, 9×4 / Side Pin 22mm / Pinch Tab / Push Button 19mm / Push Button 16mm / Top lock / Side Pin 17mm Features Winter Country of origin Mexico RUB 1,580 RUB 1,469

saving 111 ₽ Buy

in stock

Windshield wipers Denso Hybrid DUR-060L + DU-040L

Product rating 83 reviews Manufacturer Denso (Japan) More details»> Denso Hybrid series Design Hybrid Quantity in set 2 Length 1 / length 2, mm 600 / 400 Spoiler Asymmetric Find out which ones.»> Fastening Hook 9×3, 9×4 Features Hybrid design Country of origin Japan Installation clarification: for installation you need an adapter from the original brushes 2,000 ₽ 1,860 ₽

save 140 ₽ Buy

in stock

Windshield wipers SWF VisioNext 860 + 840

Product rating 17 reviews Manufacturer SWF (Germany) More details"> SWF VisioNext series Frameless design More details about the advantages."> Quantity included 2 Length 1 / length 2, mm 600 / 400 Spoiler Symmetrical What to choose for high speeds? "> Fastening Hook 9×3, 9×4 Country of origin Poland 1,430 ₽ 1,330 ₽

save 100 ₽ Buy

at the supplier's warehouse

what does it mean?

Windshield wipers Denso Flat DFR-009 + DFR-001

Product rating 6 reviews Manufacturer Denso (Japan) More details"> Denso Flat series Frameless design More details about the advantages."> Quantity included 2 Length 1 / length 2, mm 600 / 400 Spoiler Asymmetrical Find out which ones."> Fastening Hook 9× 3, 9×4 Features Full analogue of Valeo Silencio X-Trm UM700, made in France / Full analogue of Valeo Silencio X-Trm UM600, made in France Country of origin France 1,780 ₽ 1,656 ₽

save 124 ₽ Buy

at the supplier's warehouse

what does it mean?

Windshield wipers SWF HBlade x1 116183 + 116174

Product rating 1 review Manufacturer SWF (Germany) More details»> Series SWF HBlade Design Hybrid Quantity included 2 Length 1 / length 2, mm 600 / 400 Spoiler Yes Fastening Hook 9×3, 9×4 Country of origin South Korea 1,780 ₽ 1,656 ₽

save 124 ₽ Buy

at the supplier's warehouse

what does it mean?

Windshield wipers SWF Connect Upgrade SU60 + SU40

Product rating 1 review Manufacturer SWF (Germany) More details"> Series SWF Connect Upgrade Frameless design More details about the advantages."> Quantity included 2 Length 1 / length 2, mm 600 / 400 Spoiler Asymmetrical Find out which ones."> Fastening Hook 9 ×3, 9×4 Country of origin France 2,150 ₽ 2,000 ₽

save 150 ₽ Buy

at the supplier's warehouse

what does it mean?

Windshield wipers Valeo HydroConnect Upgrade HU60 + HU40

Product rating 10 reviews Manufacturer Valeo (France) More details"> Valeo HydroConnect Upgrade series Frameless design More details about the advantages."> Quantity included 2 Length 1 / length 2, mm 600 / 400 Spoiler Asymmetrical Find out which ones."> Fastening Hook 9 ×3, 9×4 Features Replacement by the manufacturer of the Silencio X-Trm series Country of origin France 2,210 ₽ 2,055 ₽

save 155 ₽ Buy

at the supplier's warehouse

what does it mean?

Frame or frameless, which is better to choose?

The consumer has always been faced with the question: which wipers to buy - framed or frameless. Both types have their pros and cons. Let's look at which windshield wiper blades fit the size of the Lada Granta, indicate the article numbers and manufacturers. This will help when choosing, so as not to make a mistake by a couple of extra centimeters.

Review of frameless wipers on Lada Granta

Let's start with frameless ones:

1. Bosch (3397118907). This company produces windshield wiper blades for many cars. For Lada Grants, they are available in lengths of 600 and 400 mm. Like the entire line, they clean very well, are durable and do not scratch the glass surface. This product is manufactured in Belgium.
2. SWF (119840, 119860). The main production is located in Poland and France. SVF is a subsidiary of Valeo, which is known for its high-quality spare parts. The length and type of fastening are ideal for the Lada Granta.
3. Horse is a domestically produced windshield wiper for the Lada Granta, the size of which is 600 and 410 mm, which is completely suitable. There is one caveat: to install them on a car you will have to use an adapter for a hook.

Review of frame wipers on Lada Granta

Frame options:

1. Bosch (3397004673, 3397004667). This is an inexpensive substitute for the frameless option from a world famous brand. They run well, don't creak and last quite a long time.
2. Bosch (3397010297). This is another inexpensive option for brushes, where a pair is already combined in one package, 60 and 40 cm long.
3. Champion (A60/B01, A41/B01). They have a metal frame and are considered a premium class among frame wipers.

There is also a third option for windshield wiper blades on Granta - these are hybrid ones. They are manufactured by Denso (060L, 040L). These are frame wipers that are covered with an aerodynamic casing. The pricing policy for such brushes is average between frame and frameless, so they are considered more affordable. In terms of technical qualities, they are in no way inferior to frameless brushes.

Comparison of price levels

Front left

Front right

Rear (hatchback, station wagon)

Rear (liftback)

Replacing windshield wiper blades yourself

You do not need any special tool for this operation. Everything is done literally by hand and without unnecessary fuss. All you need to do is buy new ones that fit your car. Please note that the right and left wipers are often not the same length.

The brush replacement procedure itself is performed in a few simple steps:

1. The windshield wiper arm is moved away from the windshield to a vertical position. Hold the lever carefully, otherwise it may hit the glass sharply and damage it. First step of replacement. The 'wiper' is installed perpendicular to the glass
2. Open the plastic cover of the brush holder. Hold the holder with one hand and pull the brush down. Remove the cap from the wiper
3. Take a new brush, put it on the holder and close the cap. Pull the brush upward. The wiper is installed. You can repeat the operation on another windshield wiper. Pull the blade down towards you and remove

Performing a replacement

First of all, you need to move the windshield wiper arm away from the glass. Then the actions correspond to the picture: we squeeze the latch, remove it from the hook, and dismantle it. The most difficult thing is to move the hook up (Fig. 2). You need to be able to avoid damaging the rubber band (brush).

Removing J-Hook wipers

Installation is carried out in the reverse order - the latch should snap into place on its own. We wish you success!

Common Mistake

When selecting the size of wipers for the Lada-Granta, it is worth considering many nuances. This also applies to the speed at which the car will move. For example, frameless brushes work well at speeds up to 60 km/h; they can also be used at 80 km/h. If the speed is higher, they will not fit tightly to the glass, and accordingly, it will be difficult to clean the windshield. Outwardly, they will look great, and when you gain speed they will simply “take off.”

How to choose the right size of windshield wipers for a Lada Granta without compromising their quality?

The safety of the driver and passengers primarily depends on the quality of windshield cleaning, so every car owner must control this issue. Wipers are classified as consumables, so sooner or later every car enthusiast will be faced with the need to replace them. What size is the Lada Granta windshield wiper and in what cases do the blades need to be changed? We will tell you more about this below.

How to set it up

The clock in the VAZ-2190 car is located on the liquid crystal display on the dashboard. The clock numbers are much larger than all the other numbers on the screen. In addition to the time, the display also displays the vehicle's daily and total mileage, fuel consumption and other data.

So, how to set the clock on the Lada Granta? To correctly set the clock on the new VAZ liftback model, you must clearly know where the following controls are located in the car:

• ignition switch - or, alternatively, side light switch on the dashboard;
• display control button (daily mileage reset button);
• windshield wiper control lever (right steering column switch).

The right steering column switch, in addition to all other functions, should scroll through the display operating modes in a circle, displaying information about the car's mileage, fuel consumption and the current time.

Where is the wiper relay located on the Granta liftback?

Many motorists are faced with the fact that their windshield wipers periodically stop working properly, suddenly turning on or off. In 95% of cases, the reason lies in the relay - regulator. It is located under the dashboard on the left side. For access with subsequent replacement, you will need to unscrew the plastic cover and remove the relay. Next, replace it with a new one and close the plastic case again.

The Grant liftback rear (front) wiper relay has several pause modes. This is very useful for reducing the frequency of cleaning when there is light rain. The pause range varies from 1 to 65 seconds. The driver independently regulates the most optimal mode. Catalog number: 723.3777. The product is completely identical to the relay on the VAZ, Priora, Kalina, Kalina 2 models. On VAZ models produced before 2001, a relay with four contacts is installed, unlike the new ones, which have six.

Windshield wiper blades Lada Granta 2011-2018: sizes and articles

They are equipped with frame brushes: 410 mm on the right side and 600 mm on the driver’s side. The standard “Hook” fastening is used, its other names are “Hook” or “J-Hook”, also simply “J” or “U”. Replacement wiper blades must match the numbers and mounting type shown here. Usually a brush 400 mm long is installed on the right side, and this is correct. There are other tricks that also need to be taken into account.

Size of Lada Granta wipers. The passenger wiper is 40 cm, and the driver's wiper is 60 cm.

When do windshield wiper blades need to be replaced?

There are several signs that indicate that the purifiers need replacing:

1. The primary and most important is poor windshield cleaning quality, the appearance of streaks and streaks when fluid is supplied from the washer reservoir. As a result of wear of the blades themselves installed on the wipers, the quality of glass cleaning is reduced to a minimum. Poor cleaning results in obstructed visibility.
2. The appearance of noise and squeaking when the wipers operate. As a rule, extraneous noise appears after the brushes begin to wear out and the glass is poorly cleaned. But there are also cases when the sound appears first, and only then the ineffectiveness of the brushes. So if you notice squeaking or noise, keep in mind that you will have to change your wipers soon.
3. The glass began to darken. As a rule, darkening of the glass is caused by the use of a low-quality washer, but the reason may also lie in damage to the rubber blade. This will cause the angle of the wiper edge to be offset.
4. The windshield wipers seem to “jump”. As a result of an increase in lifting force, the following problem appears - the wipers begin to work faster, and accordingly, they can jump over some areas of the glass surface.

The brush does not adhere tightly to the glass surface

• Mechanical damage;
• Negative consequences of an accident, collision, impact;
• Deformation from the rays of the sun, contact with a chemical reagent on the surface;
• Defect, manufacturing defect;
• Personal initiative of the owner to modernize and tune the car.

From frame to hybrid

The design of brushes has not undergone any major changes over the past century. Hopes for various types of blowers, nanocoatings and other tricks melt away before the simplicity and effectiveness of conventional mechanical cleaning. Therefore, the main efforts of developers are spent on battles with a variable radius of curvature and other innovations.

The most famous brushes are frame brushes: a kind of set of rocker arms and elastic plates plus a rubber band. Rubber was constantly replaced by other materials. Firms used synthetic and partially synthetic rubber, used graphite blade coating, three-component tape composition, etc.

As for the rocker arms, the number of which began to grow before our eyes, they decided to get rid of them altogether by using a frameless design. A spring steel element inside the rubber band improved the pressure against the glass and gave hope that the brush would not freeze in the cold.

As usual, a step back was soon taken: so-called hybrid wiper blades appeared, which were supposed to combine the advantages of their ancestors.

The hybrid brush design is completely hidden in the body, which prevents water from freezing in the joints.

In any case, you should only use brushes recommended for this car model.

Quick comparison

I offer brief recommendations for wipers. Choose what is more important to you and buy. A detailed description, installation video and price comparison are below.

How were the results assessed?

Technical indicators were assessed by a group of experts on a 5-point scale; these assessments were recorded in the test report. Ratings for the price/quality ratio were also given on a 5-point scale: according to the principle “more is better.” The calculation method is simple: dividing the cost of each product by the number of points scored, the best attitude was given a score of 5 points, and the worst - 1 point. The rest received proportional intermediate grades. Thus, an “excellent” student could ideally receive 5 points for both technical results and optimal pricing policy. The same applies to the outsider, who in both cases was threatened with one.

Change brushes at least once a year!

The competition turned out to be democratic: long and short, America and Eurasia were represented. Prices range from 300 to 910 rubles per piece. We were pleased that we did not notice the overwhelming superiority of one design over the other. From an engineer’s point of view, everything is logical: advertising is advertising, but there is no need to lose your head. Frankly, only the overseas “Tights” couldn’t handle it: tearing off the tape is almost like hitting glass with a shovel. But the malfunction is not directly related to the type of design: a specific technology clearly failed.

It is curious that “Anko”, “Champion” and “Tights”, even being new, did not receive the maximum rating. Bench tests reduced the cleaning quality of all products, albeit to varying degrees. This reinforces the need for an annual “changing of the guard” on the windshield. Competitors are listed in alphabetical order. The best value for money is the German Heiner Hybrid; Denso, Valeo and Vin scored the maximum points. Our choice ultimately fell on the Korean “Denso”: low price, text in Russian, excellent scores and... And, whatever one may say, the most modern design. You can't escape fashion.