Bolt pattern Cherie Bonus: selecting wheels according to the rules

DIA (mm) Center Hole:
The diameter of the central hole, another marking is CO.

Disclaimer: Although the data represents official manufacturer figures, the information above is for reference only and is not guaranteed to be absolutely accurate.

Discs for Chery Amulet (A15) play an important role. This is both attractive and an additional improvement in performance. You just need to buy the right drive models that provide these indicators.

Standard disk sizes Chery Amulet 2006, 1.6i

Table of parameters and wheel bolt patterns for the Chery Amulet 1.6i model - 2006. Minimum and maximum sizes of standard disks on the Chery Amulet 1.6i - 2006.

Disc drilling parameters are usually called bolt pattern:

  • LZ (number of holes)
  • PCD (hole center circle diameter)
  • ET (disc offset)
  • DIA (hole diameter)
Make model modification AutoYear of issueOptionsDisc widthDisc diameterBolt pattern LZ*PCDDeparture ETDiameter DIAtype of instalation
Chery Amulet 1.6i20065.5Jx14 4/100 ET45 d57.15.5144X1004557.1Factory
Chery Amulet 1.6i6Jx14 4/100 ET38 d57.16144X1003857.1Acceptable
Chery Amulet 1.6i6Jx15 4/100 ET38 d57.16154X1003857.1Acceptable
Chery Amulet 1.6i6.5Jx15 4/100 ET35 d57.16.5154X1003557.1Acceptable

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source

Size matters

The manufacturer of these cars equips their models at the factory with standard wheels and tires. They can be replaced with others if the wheel bolt pattern allows, and the new tires do not rub against body parts and chassis.

It is better to entrust the selection of elements of such tuning to a specialist. It is especially good if tires and wheels are replaced at the same time on Chery Amulet (A15). In this case, it will be possible to take into account all the parameters necessary for a comfortable and safe ride, depending on your preferred driving style.

If you do this yourself, before purchasing, you should carefully study the advice of experts and reviews of real customers about each suitable model of wheels and tires.

The bolt pattern of Chery Amulet wheels (A15) is a special parameter that indicates the number of mounting bolts in the car, as well as the diameter at which they are located. Wheels are an important element of a car, on which the car’s grip on the road depends. This element is also responsible for:

  • sustainability;
  • controllability;
  • fuel consumption level;
  • dynamic indicators.

This parameter must be given special attention. You need to know how the bolt pattern on a vehicle is determined. It is this parameter that must be taken into account when choosing a new set of wheels.

Standard disk sizes Chery Amulet 2010, 1.5i

Table of parameters and wheel bolt patterns for the Chery Amulet 1.5i model - 2010. Minimum and maximum sizes of standard disks on the Chery Amulet 1.5i - 2010.

Disc drilling parameters are usually called bolt pattern:

  • LZ (number of holes)
  • PCD (hole center circle diameter)
  • ET (disc offset)
  • DIA (hole diameter)
Make model modification AutoYear of issueOptionsDisc widthDisc diameterBolt pattern LZ*PCDDeparture ETDiameter DIAtype of instalation
Chery Amulet 1.5i20105.5Jx14 4/100 ET45 d57.15.5144X1004557.1Factory
Chery Amulet 1.5i6Jx14 4/100 ET38 d57.16144X1003857.1Acceptable
Chery Amulet 1.5i6Jx15 4/100 ET38 d57.16154X1003857.1Acceptable
Chery Amulet 1.5i6.5Jx15 4/100 ET35 d57.16.5154X1003557.1Acceptable

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

  • On what roads will the car be primarily used?
  • Do you need increased cross-country ability?
  • How much of the route will be city roads and how much will be highways?
  • Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

Standard disk sizes Chery Amulet 2007, 1.6i

Table of parameters and wheel bolt patterns for the Chery Amulet 1.6i model - 2007. Minimum and maximum sizes of standard disks on the Chery Amulet 1.6i - 2007.

Disc drilling parameters are usually called bolt pattern:

  • LZ (number of holes)
  • PCD (hole center circle diameter)
  • ET (disc offset)
  • DIA (hole diameter)
Make model modification AutoYear of issueOptionsDisc widthDisc diameterBolt pattern LZ*PCDDeparture ETDiameter DIAtype of instalation
Chery Amulet 1.6i20075.5Jx14 4/100 ET45 d57.15.5144X1004557.1Factory
Chery Amulet 1.6i6Jx14 4/100 ET38 d57.16144X1003857.1Acceptable
Chery Amulet 1.6i6Jx15 4/100 ET38 d57.16154X1003857.1Acceptable
Chery Amulet 1.6i6.5Jx15 4/100 ET35 d57.16.5154X1003557.1Acceptable

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source

Standard disk sizes Chery Amulet 2008, 1.6i

Table of parameters and wheel bolt patterns for the Chery Amulet 1.6i model - 2008. Minimum and maximum sizes of standard disks on the Chery Amulet 1.6i - 2008.

Disc drilling parameters are usually called bolt pattern:

  • LZ (number of holes)
  • PCD (hole center circle diameter)
  • ET (disc offset)
  • DIA (hole diameter)
Make model modification AutoYear of issueOptionsDisc widthDisc diameterBolt pattern LZ*PCDDeparture ETDiameter DIAtype of instalation
Chery Amulet 1.6i20085.5Jx14 4/100 ET45 d57.15.5144X1004557.1Factory
Chery Amulet 1.6i6Jx14 4/100 ET38 d57.16144X1003857.1Acceptable
Chery Amulet 1.6i6Jx15 4/100 ET38 d57.16154X1003857.1Acceptable
Chery Amulet 1.6i6.5Jx15 4/100 ET35 d57.16.5154X1003557.1Acceptable

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source

Chery Amulet 2007 1.3i

Engine: I4, Gasoline Power: 82 hp (60 kW)

Wheel bolt pattern parameters

PCD (number of holes x circle diameter)4×100 mm
Center Hole Diameter (DIA)57.1 mm
FastenersM12 x 1.5
Type of fastenerBolt
TiresDiscsPCDDiaPressure
175/65 R14 82S Factory kit5.5Jx14ET454×10057.12.1
185/60 R14 Tuning6Jx14 ET384×10057.1
185/55 R15 Tuning6Jx15 ET384×10057.1
195/50 R15 Tuning6.5Jx15 ET354×10057.1
What wheel sizes does the manufacturer recommend to install?

As standard, the Chery Amulet 2007 1.3i is equipped with 5.5Jx14 ET45 wheel rims assembled with 175/65 R14 82S tires. Where:

  • 5.5J - rim width in inches;
  • 14″ — tire diameter in inches;
  • ET45 - disc offset in millimeters.

The vehicle tire marking 175/65 R14 is deciphered as follows:

  • 175 — profile width (cross section of the tire) in millimeters;
  • 65 — profile height as a percentage of its width;
  • R - radial cord winding;
  • 14 is the tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82S:

  • 82 - maximum permissible tire load 475 kg;
  • S — maximum permissible vehicle speed is 180 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x100. Thus, all disks are mounted with four bolts and the distance between them is exactly one hundred millimeters. The car's hub diameter is 57.1 mm.

Standard tire pressure is 2.1 MPa.

What are they made of?

The easiest way to buy cast alloy wheels in Moscow. They are made from a special alloy based on aluminum and additional additives. The product is poured under high pressure, polished, and brought to high aesthetic standards. If you follow the rules for their use, such wheels will last for several seasons of active daily driving on not the best roads. The price of such disks depends on various parameters. But any owner of Chery Amulet (A15) will find a favorable price for themselves.

There are also forged wheels. They are much more expensive because they are made using a different technology. At the same time, their durability is much higher. But often they need to be ordered separately. They are quite difficult to find in mass sales.

Chery Amulet 2007 1.6i

Engine: SQR480, I4, Gasoline Power: 97 hp (71 kW)

Wheel bolt pattern parameters

PCD (number of holes x circle diameter)4×100 mm
Center Hole Diameter (DIA)57.1 mm
FastenersM12 x 1.5
Type of fastenerBolt
TiresDiscsPCDDiaPressure
175/65 R14 82S Factory kit5.5Jx14ET454×10057.12.1
185/60 R14 Tuning6Jx14 ET384×10057.1
185/55 R15 Tuning6Jx15 ET384×10057.1
195/50 R15 Tuning6.5Jx15 ET354×10057.1
What wheel sizes does the manufacturer recommend to install?

The Chery Amulet 2007 1.6i is equipped with 5.5Jx14 ET45 wheel rims and 175/65 R14 82S tires as standard. Where:

  • 5.5J - rim width in inches;
  • 14″ — tire diameter in inches;
  • ET45 - disc offset in millimeters.

The vehicle tire marking 175/65 R14 is deciphered as follows:

  • 175 — profile width (cross section of the tire) in millimeters;
  • 65 — profile height as a percentage of its width;
  • R - radial cord winding;
  • 14 is the tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82S:

  • 82 - maximum permissible tire load 475 kg;
  • S — maximum permissible vehicle speed is 180 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x100. Thus, all disks are mounted with four bolts and the distance between them is exactly one hundred millimeters. The car's hub diameter is 57.1 mm.

Standard tire pressure is 2.1 MPa.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

  • deterioration of management;
  • uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

  • increased fuel consumption;
  • rapid wear of the outer tread segments;
  • the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

Chery Amulet 2007 1.6i

Engine: SQR480, I4, Gasoline Power: 88 hp (65 kW)

Wheel bolt pattern parameters

PCD (number of holes x circle diameter)4×100 mm
Center Hole Diameter (DIA)57.1 mm
FastenersM12 x 1.5
Type of fastenerBolt
TiresDiscsPCDDiaPressure
175/65 R14 82S Factory kit5.5Jx14ET454×10057.12.1
185/60 R14 Tuning6Jx14 ET384×10057.1
185/55 R15 Tuning6Jx15 ET384×10057.1
195/50 R15 Tuning6.5Jx15 ET354×10057.1
What wheel sizes does the manufacturer recommend to install?

The Chery Amulet 2007 1.6i is equipped with 5.5Jx14 ET45 wheel rims and 175/65 R14 82S tires as standard. Where:

  • 5.5J - rim width in inches;
  • 14″ — tire diameter in inches;
  • ET45 - disc offset in millimeters.

The vehicle tire marking 175/65 R14 is deciphered as follows:

  • 175 — profile width (cross section of the tire) in millimeters;
  • 65 — profile height as a percentage of its width;
  • R - radial cord winding;
  • 14 is the tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82S:

  • 82 - maximum permissible tire load 475 kg;
  • S — maximum permissible vehicle speed is 180 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x100. Thus, all disks are mounted with four bolts and the distance between them is exactly one hundred millimeters. The car's hub diameter is 57.1 mm.

Standard tire pressure is 2.1 MPa.

General background information

Ranges of possible values ​​for tires and wheels Chery Amulet 2007.

Tires

Diameter14″–15″
Width (mm)175–195
Profile (%)50–65
The smallest size175/65 R14
The biggest size195/50 R15

Wheel disks

Diameter14″–15″
Width (inches)5.5–6.5
Reach (mm)35–45
Drills4×100
Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

  • On what roads will the car be primarily used?
  • Do you need increased cross-country ability?
  • How much of the route will be city roads and how much will be highways?
  • Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Chery Amulet 2007?

3 types of rims:

  • Stamped (economical price category) - made from a sheet of iron by stamping on a press.
  • Light alloy - manufactured by casting (more reliable than stamped ones).
  • Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

Features of vehicle bolt pattern parameters

It is worth noting that each model for a particular vehicle brand has its own characteristics:

  • rim width;
  • disk diameter;
  • diameter circle;
  • rim offset size;
  • some other parameters.

To prevent premature tire wear and damage to the vehicle suspension. When choosing tires, it is imperative to pay attention to such an aspect as technical characteristics. If you encounter difficulties in selecting the most suitable tires, you can always seek advice from store employees who will help you choose tires, taking into account, first of all, the model of your car, the budget you plan to spend on the purchase, as well as some other parameters.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]