The throttle valve (throttle unit (DZ and DU, respectively)) is necessary to regulate the air flow, which is necessary for preparing the fuel-air mixture (FA) entering the cylinders. During operation of the remote control, its excessive cooling occurs, resulting in interruptions in engine operation.
In order to prevent such a scenario, the manufacturer modified the throttle assembly, equipping it with heating, which is carried out using coolant. In the summer, according to many car owners, heating the diesel protection negatively affects engine performance and leads to loss of power and unstable operation of the power unit. As a result, many turn off the remote control heating for the summer, noting an improvement in engine performance and a significant increase in dynamics. However, this is all in the opinion of some motorists, but what are things really like and what could such a modification mean for the engine? Let's find out...
What is a throttle body pipe?
Throttle pipe
— the air supply system to the engine, assembled, contains several sensors: TPS (
throttle
), IAC (idle air control).
Interesting materials:
What do the information signs mean? What does each traffic light color mean? What does a hashtag mean? What does a red traffic light mean? What does the red triangle mean? What does torque mean? What does m s mean on tires? What does the m stand for on a driver's license? What do the markings on tires mean? What does commercialism mean?
Why turn off the throttle valve heating?
According to supporters of turning off the throttle body heating, the coolant heats the air excessively, which affects engine efficiency. The bottom line is that heated air contains less oxygen, therefore, the fuel assembly will be less productive and the combustion of the combustible mixture will be less efficient. Most of all, in their opinion, this is observed in hot weather, when the air temperature is already high. Disabling the throttle heating allows you to increase the stability of the power unit, as well as get a small increase in power in hot weather.
Do-it-yourself repairs
Anyone who has basic knowledge of how the cooling system of the VAZ-2107 works, plumbing tools and is able to determine the cause of the problem can try to fix the breakdown on their own. The driver will be able to cope with replacing a damaged wire or pump belt without any problems. But if you are not sure of the diagnosis or there is a suspicion of a serious breakdown, it is certainly better to put the car in the hands of a specialist.
Improperly carried out repairs can create many serious problems. First of all, the driver should know that a malfunction of the car’s hydraulic system will very quickly lead to complete destruction of the engine.
This is all clear, but what is it really like?
In fact, driving without heating the remote control is not advisable, and in winter, turning off the throttle valve can lead to freezing of the remote control. Due to high air humidity and negative temperatures, freezing of the damper, as well as channels, including idle channels, occurs.
How about summer? In the summer, heating the remote control has virtually no effect on the temperature of the air that passes through the throttle valve, since the powerful air flow (approximately 40 l/sec and 2400 l/min) simply does not have time to warm up in such a short period of time passing through the throttle assembly. In addition, the coolant temperature is regulated by the cooling system regardless of the season and ambient temperature.
If the above arguments do not seem convincing enough to you, you can personally check whether it makes sense to turn off the heating of the throttle assembly. How to do it right?
Periodic replacement of refrigerant
The period for replacing the fluid is indicated by the manufacturer in the operating instructions. In older engines, the replacement interval is usually 2 years or 60 thousand km of the vehicle. In new engines, this period is increased to 5 years or up to 120 thousand kilometers of total mileage.
To replace the cooler, it is necessary to drain the used one. To drain, you need to perform the following operations:
- wait until the engine cools down, otherwise there is a risk of burns;
- open the radiator cap;
- install a wide vessel under the radiator;
- Unscrew the drain plugs in the radiator and engine block.
When replacing coolant, and especially when changing its type, it is necessary to flush the hydraulic system. Flushing involves supplying water with a hose to the radiator filler neck and passing it through the entire hydraulic system. During the procedure, you can start the engine so that the running pump participates in the flushing process.
After emptying and flushing, the drain plug must be tightened. Slowly fill the radiator, block jacket and pump to the maximum level. When the radiator cap is open, you must start the engine to remove air from the pipeline. Only when you are sure that the air has been removed can you tighten the plug tightly.
Heated throttle VAZ 2110 8 valves
- To the beginning of the forum
- Forum Rules
- Old design
- FAQ
- Search
- Users
I don’t really care, I turned it off, period. , I may return it for the winter if I notice that it will “coke”
oil in the throttle or something will freeze and freeze (just before shutting it off, I cleaned the entire receiver and throttle, so I have an idea of the amount of oil and dirt that was in them, so we’ll see in another 50 thousand whether this will have an effect) IMHO, nonsense that's all, and according to my observations, turning off the throttle heating does not affect anything 
I’ve already ridden in super-humid weather at a temperature of about 0 on the highway, at high speeds, and there were no problems with anything
