Trunk size of VAZ 2111 station wagon in centimeters

The VAZ 2111 station wagon is the next modification after the “ten”. The model has a combined interior and luggage compartment, which makes the car more suitable for transporting large cargo. What if you needed to transport a refrigerator or chest of drawers to your country house? You simply cannot do without such a car.

The size of the luggage compartment in the VAZ-2111

Although there are many foreign cars in fashion today, the VAZ-2111 still remains a workhorse, the advantages of which are that the car can be used in any conditions, as well as repaired with your own hands. Expensive brands of cars require ordering auto parts; often they need to wait for 2-3 months, which is extremely inconvenient - the car is idle, and the driver becomes a pedestrian.

This definitely won’t happen with the VAZ-2111 - the mechanics and manual controls allow even a beginner to quickly and easily deal with problems, because parts for the car can be bought at the first service station or a specialized auto parts store.

The luggage compartment of the VAZ-2111 has the following characteristics:

• if loaded to the ceiling, perhaps 575 liters;
• folded seat allows you to increase 1215 liters.

Now about the size of the trunk. Provision is made for the transportation of narrow cargo with a long format. The backrest of the rear seat, located in the middle, can be reclined completely, while those located on the sides recline, taking into account the smaller amplitude.

That is, the VAZ-2111 allows you to transport cargo such as pipes, skis, and a piece of linoleum up to 3 m.

What quantities may also be useful:

1. Loading height of luggage compartment.
2. The length, if we focus on the cargo loading height level, is 965 mm.

The dimensions of the luggage compartment with the rear seat folded down on the VAZ-2111 are as follows:

• the entire length of the VAZ-2111 trunk is no more than 1630 mm;
• the pitch to the rear seats is approximately 1030 mm;
• as for the width of the compartment between the wheel arches, it reaches 930 mm;
• height is also 930 mm;
• If you measure the height of the rear door opening, it is 890 mm.

If cargo is being transported, the load capacity of the VAZ-2111 is 500 mm, and when loaded it is 1030 mm.

Lada Vesta

I hasten to share the event. I was one of the first in our city to own a Vesta with a CVT. Ras.

Dealer news:

New cars and used cars - tens of thousands of ads for sale. Reviews from car owners. Technical characteristics and accessories. Comparison of models and Test Drives. News from the world of cars. Prices for new cars. Promotions and special offers from car dealerships. We will help you make your choice!

This site is for informational and reference purposes only and under no circumstances constitutes a public offer.

Certificate of registration of mass media EL No. FS77-68106 dated December 21, 2016. Issued by the Federal Service for Supervision of Communications, Information Technologies and Mass Communications. 16+

Car: VAZ-2112. Asks: Dmitry. The essence of the question: What are the dimensions of the trunk, I want to buy an oversized item on AVITO?

Hi all! I'm interested in the exact dimensions of the luggage compartment both folded and unfolded. The thing is that I live in the region, and now I want to rent a house in a place that is more like a village than an urban settlement.

Therefore, I plan to go to the city for the weekend and buy myself some household items. Single bed. I just don't know if I can fit it in the trunk. Therefore, I want to know the exact dimensions of the luggage compartment, so that when I call the seller, I can understand whether this thing will fit into my two-room apartment! Thank you

Modifications of VAZ-2110

Varieties of the 2110 are precisely the VAZ-2111, 2112. All of these cars have 4-cylinder, 8- and 16-valve engines. The volume of one gasoline tank is 1.5-1.6 liters. In the early 90s, cars were produced with a carburetor power system, but in the early 2000s they began to integrate fuel injection, which differs in distribution capacity, it is called an injector. The drive became front-wheel drive.

Regarding the body, there are 3 different types:

• VAZ-2110 is made in the form of a sedan;
• body 2111 is called a station wagon;
• 2112 is called a hatchback.

The difference in the 2110 modifications is significant - different bodies and engines. Everything else is very similar, so the craftsmen adjust some parts to each other if desired. The production of 2110 stopped back in 2007, but this does not prevent the produced cars from traveling around the country and beyond.

Drivers note the following advantages of the VAZ-2111:

• machine reliability;
• simplicity of design, conciseness and lack of pretentiousness;
• low cost of domestic cars.

Thanks to these characteristics, the VAZ-2111 has become a real legend. But you can only dream about the luxury of the interior - everything is simple here, just like outside, if we talk about more space in the back, then you should choose 21099.

In Russia, winters are characterized by severe frost and temperature instability; many cars take a long time to warm up before setting off, which cannot be said about the VAZ-2111. The designers made sure that even at minus 25 degrees the car would start almost immediately, even if it had been parked for several days without moving.

What you need to pay attention to is the timely filling of oil, and the oily solution should correspond to the season. The chassis is also an excellent option for Russian roads. The luggage compartment capacity is 380 liters.

Body advantages

Although the VAZ 2110 body is classified as a development corresponding to the golf class, it shows very decent parameters in this segment. For example, due to the sufficient length of the body, the car has a very spacious trunk volume.

In the usual configuration, it is 415 liters, which is already a lot and allows you to transport not only the essentials (spare wheel, jack, keys), but also many things - from supermarket purchases to camping equipment. And if you fold the rear seats, the car's capacity increases to 1270 liters.

Transformation of the VAZ 2110 interior

Considering that the length distance between the centers of the VAZ 2110 wheels is 2495 mm, plus the length of the luggage compartment is 944 mm, this results in almost 2 meters of additional “luggage” space. That is, if necessary and if you have a mattress, you can sleep here - relax on a long journey, or not take it, and then set up a tent when you go to the sea or river for the weekend. In addition, the car is thus “protected.”

Cons of the 2111 model

Despite the fact that the car works properly even at minus 20 degrees, drivers and passengers cannot feel comfortable in severe frost, it’s all because of the stove, which is equipped in an unusual way. While the legs are freezing, the upper torso is literally burning from high temperatures, the creators clearly did not think through this subtlety.

The disadvantages of the VAZ-2111 also include the following:

1. Sound insulation leaves much to be desired.
2. Where the hood is located, the iron is unreliable, so do not be surprised if, due to frequent pressure on the hood, dented areas form when closing.
3. It’s easy to drive smoothly in a straight line, but you shouldn’t exceed the speed of 130-140 km/h, the car can lead.

If you want to improve the performance of the VAZ-2111 and modernize it, install power steering - this option is not included in the basic kit, it can be installed as an additional feature upon request, which is what service station workers do.

Reviews about VAZ-2111

Regarding the VAZ-2111, owners of domestic cars leave the following reviews:

1. I didn’t really like the car, it’s angular and dents may appear after minor impacts.
2. In general, the VAZ-2111 holds up well on the road surface, but the panel rattles. Transport for beginners, just right.
3. External luxury is not enough - add tuning, turn on your imagination and enjoy your own work of art.
4. The VAZ-2111 was the first car, so it’s difficult to forget about this car. But no matter how good a friend a domestic car is, in the end I made a choice in favor of a foreign car with good shock absorption and a smooth ride. It’s a pity that today the VAZ-2111 is no longer produced - not everyone can afford to immediately buy an expensive foreign car.
5. A good car for the money. Over 70,000 km in the city, the car showed itself to be a solid four. During this time, there were no major breakdowns, but I had to change the engine oil, gearbox oil (semi-synthetic), fluid suitable for the hydraulic booster, and filter devices about 5-6 times.

Starter, ignition, rear fog lamp relay

In order to carry out quick checks and repairs, the ignition system relay is installed under the front dashboard of the car, behind the hood release handle. It is located just below the central dashboard. The module is closed with a plastic plug, which must be opened slightly to test for functionality.

Starter, ignition, rear fog lamp relay

Next to the indicated relay, there is a similar one for the rear fog lights and the starter.

The main task of the relay when igniting is to reduce the applied load to the contacts. When the engine starts, the relay turns off some electrical circuits in the vehicle system. The system is used not only in injection, but also in carburetor engines.

In the event of a malfunction or malfunction in the ignition system, it is necessary to monitor the operation of the relay. For this purpose, open the box and carefully remove the desired element. It is attached using contacts to special grooves. The first thing to do is look at the oxidation of the contacts, if necessary, clean them with a soft cloth or treat them with a special liquid.

To check functionality, you need to use a regular multimeter. We connect to incoming connections and check the numbers. If there is no short circuit when current is applied, it means the element is not working. Replacement is carried out in a similar manner. It is necessary to use a standard element with the number of amperes indicated on the housing.

VAZ-2111 – video test drive

This car should become an indispensable friend for those who often have to transport small quantities of cargo. The rear seats, if necessary, can be folded to create a flat horizontal floor, while the luggage compartment volume will increase to 750 liters with a permissible load of 500 kg. An additional 50 kg of cargo can be stored on the roof rack. It is possible to tow a trailer equipped with brakes weighing up to 1000 kg. The reliable body can withstand long-term use on any type of road - this is confirmed by the most severe tests in Russia. High level of comfort for cars of this type. The cabin can easily accommodate 5 people. The impeccable front and rear suspension, combined with lightweight rack-and-pinion steering and ventilated front brakes, provide enjoyable handling and precision in following your commands. All vehicles are equipped with a tilt-adjustable steering column.

Technical characteristics of VAZ-2111

Body type: 5‑door station wagon (5-seater)

Overall dimensions of VAZ-2111

Length: 4285 mm – Width: 1680 mm – Height: 1480 mm – Wheelbase: 2492 mm – Rear track: 1380 mm – Front track: 1410 mm

2111 1.5

– Engine capacity: 1499 cm3 – Power (hp/rpm): 72/5600 – Torque (Nm/rpm): 106/3400 – Acceleration time to 100 km/h: 15.5 s

2111 1.5i

– Engine capacity: 1500 cm3 – Power (hp/rpm): 76/5600 – Torque (Nm/rpm): 118/3000 – Acceleration time to 100 km/h: 15

21113 1.5i

– Engine capacity: 1500 cm3 – Power (hp/rpm): 94/5600 – Torque (Nm/rpm): 130/3600 – Acceleration time to 100 km/h: 12 s

Maximum speed of VAZ-2111

Checkpoint:

5 speed, mechanical

Trunk volume of VAZ-2111

426/1420 l. min/max

Tank volume VAZ-2111

Fuel consumption VAZ-2111

Urban cycle (l / 100 km): 9.8 – suburban cycle (l / 100 km): 6.1

Weight in running order, kg: 1055 – Gross vehicle weight, kg: 1550

VAZ-2111 tire size

175/70/R13; 175/65/R14; 195/60/R15

VAZ-2112 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ March-1 (LADA-BRONTO 1922-00) Photo Equipment

VAZ-2109 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2108 Volume of tank, trunk. Load capacity. Fuel consumption

Lada Kalina 2 hatchback Tank volume, trunk. Load capacity. Fuel consumption

VAZ-2102 Volume of tank, trunk. Load capacity. Fuel consumption

Lada Priora sedan Tank and trunk volume. Load capacity. Fuel consumption

VAZ-2101 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2105 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2110 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2121 / 2131 Niva Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2103 Volume of tank, trunk. Load capacity. Fuel consumption

Lada Vesta Tank and trunk volume. Load capacity. Fuel consumption

VAZ-2104 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2106 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2107 Volume of tank, trunk. Load capacity. Fuel consumption

The luggage compartment of the VAZ 2111, when compared with other cars of the “ten” family, is huge, so there is room for your imagination to run wild. You can install a huge subwoofer, but not all drivers are music lovers, so let's look at other options. So, we have a soundproofed trunk of a VAZ 2111. We go to a hardware store and buy there: a couple of sheets of plywood 12 mm thick (1.5x1.5), a gray carpet with which we will cover it, and a jigsaw. First we need to cut out the floor.

Most likely the plywood will not lie perfectly flat. Therefore, we cut out rectangular pieces of plywood along the perimeter of the niche for the spare wheel and secure them with self-tapping screws to the bottom of the floor plywood so that the floor door does not fall through, but rests on these pads. In this way, we ensure that the spare wheel niche does not fall through and the floor lies flat, resting not only on the extreme points, but also on points along the perimeter of the wheel niche. We cut out all the elements from cardboard and only then transfer the templates onto plywood. We attach all the same corners to the body of the VAZ 2111, using modelling, so that there are no creaks later. then we assemble all the prepared plywood into a single structure and make sure that nothing interferes with us when closing the luggage compartment. The sheets of plywood are secured together with corners, which we first place in the cut-out recesses. Then it won’t hurt to treat the plywood with drying oil or a similar substance so that it does not absorb water.

We take a furniture stapler and tighten each element separately, securing the carpet on the back with staples. The decorated trunk of the VAZ 2111 should also perform a certain role as body rigidity. We fix a kind of spacer made of the same plywood between the left and right parts. You can also install trunk lighting there. For the side niches of the luggage compartment of the VAZ 2111, we make an indent through rectangular doors that open downwards. The spare wheel well is a composite element. A small part of the floor is used to store tools, and a large part is used for a spare tire. Such tuning of the VAZ 2111 has its disadvantages. First of all, this is weight; after tuning, the car will become heavier by about 25 kg. In addition, the free space in the trunk is reduced, there is no rigid shelf, and something like a spacer has to be constantly removed when transporting large cargo. Now the pros. It is immediately worth noting the beautiful design. Also, squeaks completely disappear, the acoustic effect improves, the level of sound insulation increases, the floor becomes more rigid, and convenient access is provided to the side niches.

Engine design features

Structurally, the engine has a characteristic design for all AvtoVAZ cars of this series. The design of the motor is almost no different from the power unit of the VAZ 2110 and its modifications. Let's look at the design features of the 21114 engine.

Cylinder block

A special cast iron is used to make the cylinder block. This block has a high boost level and can withstand overheating well. However, the thermal conductivity of cast iron blocks is 4 times lower than that of aluminum ones. Therefore, to prevent the engine from becoming deformed due to uneven heating, the coolant flows are made along the entire height of the block.

The upper part of the cylinder block is closed by an aluminum cylinder head. The cylinder head is the main engine unit, designed to control the combustion process of the air-fuel mixture and exhaust gas removal. Channels for cooling the combustion chamber are cast in the cylinder head.

The cylinder head is mounted on guide pins. An important condition when installing the head is a reliable seal with the block. A gasket is used to securely fix the two parts of the block.

Gas distribution mechanism

The operation of the mechanism is to supply the air-fuel mixture and remove exhaust gases. The device consists of a camshaft and a valve mechanism. The camshaft is mounted in the upper supports of the cylinder head and rotates from the crankshaft by an elastic toothed belt. On the rear side of the shaft there is a pin for fastening the ignition timing sensor.

The valves are actuated by pushrods and cams located on the camshaft. When the engine is running, the pushers gradually rotate around their axis to ensure even wear. The clearance in the valves is set by adjusting washers, which are installed in the upper part of the pushers.

The valves are made of chromium-silicon or chromium-nickel-molybdenum steel. The valves move inside guide bushings pressed into the block head. The bushings are covered with fluorine rubber rubber caps with steel rings, which are installed to prevent oil from entering the combustion chamber. To prevent the valve from being destroyed by high temperatures, a heat-resistant alloy is applied to its working surface.

Crankshaft

The VAZ 21114 has a cast iron crankshaft with eight counterweights. Counterweights balance the reciprocating forces of the pistons to ensure smooth engine operation. The crankshaft is held in the block by main bearing supports. The function of bearings is performed by steel-aluminum liners. To prevent axial movement of the crankshaft, thrust half-rings are installed in the grooves of the middle support. The main bearings are lubricated by oil lines inside the shaft.

Piston group

Fret 21114 is equipped with forged steel connecting rods with liners on the lower head and a steel-bronze bushing at the top. The piston is made of aluminum alloy. On its bottom there are recesses for the valves and combustion chamber, which prevent contact of the piston with the valves in the event of a malfunction of the timing drive, i.e. model 21114 does not bend the valve.

But not all VAZ car engines have this advantage.

Roof rack arrangement for VAZ 2111

The VAZ 2111 roof rack is installed in two cases:

• when transporting oversized cargo that does not fit even in the very capacious interior of a station wagon;
• with a banal lack of space in the trunk.

Oversized cargo, such as a bicycle, requires fastening of a special design that ensures reliable fixation of the transported object. Skis can be simply secured with standard rubber bands with hooks at the ends, which can be purchased at a car store. But, say, securing a fishing boat or a refrigerator so that it can be transported safely and without damaging the car is a whole art.

Use caution when driving with oversized cargo on the roof. It has significant windage, and controllability parameters change unpredictably.

If you systematically do not have enough space inside the body, consider purchasing a soft or hard roof box. A soft car box is simpler; when folded, it can be stored at home, but it gets dirty easily and is difficult to clean, does not have a lock, and spoils aerodynamics. A hard box looks more aesthetically pleasing, is easier to clean, and can be locked, but it is more difficult to load and difficult to store at home.

Checkpoints:

All luggage rack measurements are given based on control points, which are different for different cars, and in general have the following meaning:

• A: top left corner;
• B: top right corner;
• E: inseam to the far left (bottom corner);
• D: Inseam to the far right (bottom corner).

Important: in cases where the car does not have control points, the data is presented in the format length – width – height.

Caution: the above data are the official figures of the manufacturer, however, please note that the information is for reference only and does not guarantee absolute accuracy.

Source

Installing the trunk on the roof rails

The VAZ 2111 is equipped with roof rails installed during assembly at the factory. These are the so-called high rails, in their upper part spaced from the roof by about 6 cm. Installing the trunk on the rails in this case is not difficult, but if these elements were integrated, a special installation kit would be required to install the trunk. Many models of roof racks are suitable for installation on high roof rails, both from foreign manufacturers - for example, Thule (Sweden) or Nord (China), and domestic ones - Omega-Favorite (manufactured by the Ant rack) or Atlant (Atlant rack). The luggage carrier is supplied with two crossbars of rectangular or aerodynamic cross-section, made of steel or aluminum alloy, and two pairs of their fastenings to the roof rails of the VAZ 2111.

Installing the trunk begins with choosing a location for the crossbars. To transport long items that protrude beyond the dimensions of the body, place the cross members as far apart as possible, and to transport compact loads, install them closer to the middle of the distance between the axles of your station wagon, approximately above the front of the rear door.

Having chosen the location for installing the crossbars, secure them to the rails with fasteners. Often this operation does not even require a wrench - the mounting screws have their own plastic flywheel and are tightened by hand.

How to install

To attach the trunk to a VAZ 2110 car, it is not necessary to visit a car service center. You can install the roof rack yourself. Procedure:

We install supports for further installation of transverse arches

It is important to check that the support fits onto the seal. Otherwise, there is a risk of damaging the car's paintwork. Pull out the control knob

Carefully holding the support, turn the adjuster until the structure fits tightly to the machine. Do not overdo it so as not to deform the beam. We repeat this procedure with another support. We check the geometry: it is necessary to secure the supports evenly. We monitor whether they lie tightly. We install the cross members and check the geometry again. We fix the box, mesh or other structure.

Fastening to gutters

Installing a roof rack on a VAZ 2110 using mounts for gutters is the most common type of fastener, typical mainly for domestic cars. Advantages:

• many options for trunk position;
• the ability to install several pairs of rack racks;
• the presence of a special type of luggage installations - baskets;
• versatility - suitable for almost all cars of the VAZ family.

Fastening to the doorway

Unlike the previous one, this mounting option is typical for foreign cars. But the installation of a trunk on a VAZ 2110 often occurs due to clamps behind the doorway.

The car trunk is secured thanks to profiled side bends. Fasteners are placed there, and the required level of structural stability is achieved due to the tightening device at the base of the trunk itself.

The advantages of this fastening system:

• versatility - suitable for most models;
• safety – high protection against removal.

Homemade trunk for VAZ 2111

The design is so simple that it is quite possible to make a roof rack for a VAZ 2111 with your own hands. You will need 2 pieces of steel box 20x30 mm, each 120 cm long, and 4 clamps for fastening the exhaust pipe of a GAZ 3110 car. You use the boxes as crossbars, and the clamps for attaching the crossbars to the roof rails.

Boxes of the required length can be cut with a grinder or an ordinary hacksaw. Burrs must be cleaned with a file. Just in case, the cuts at the ends of the crossbars can be wrapped with black electrical tape in several layers with some overlap, this will protect you from damage when using the trunk.

To attach to the rails perpendicular to the long side of the box profile, drill two pairs of holes in each of the crossbars with a diameter slightly larger than the diameter of the screw part of the clamps. Select installation locations for the crossbars and place them on the rails. Place the first clamp under the railing and perform the following operations:

• insert the clamp into the drilled holes,
• place a jumper
• install Grover washers,
• tighten the screws.

Do the same procedure with the other three clamps. Keep in mind that your DIY trunk is different from a professional one. The top surface of the crossbars is not flat. Eight nuts and eight ends of the screw parts of the clamps protrude from it. This is not a problem if the load that fits between the width of the nuts is being transported. Otherwise, care should be taken to ensure that the nuts do not scratch the surface of the cargo being transported.

Do not forget that your homemade trunk, like any professional one, is limited by the load-carrying capacity of the roof rails specified in the official technical documentation. It is 50 kg. Please note that long items create an additional load moment on the roof and should be transported with extreme caution.

What to choose

Trunk volume of Lada Vesta in liters

Before moving directly to choosing a VAZ roof rack, it is important to clearly understand two points:

• what do you plan to transport;
• what is the mounting system of your car?

Depending on the purpose of transportation, there are:

1. Open trunks are suitable for transporting large, bulky or dirty cargo over short distances. They are a rectangular base with fastening elements. They are budget-friendly, but they reduce the aerodynamics of the car and, accordingly, increase fuel consumption.
2. Closed trunks - used for frequent long-distance trips and in cases where it is necessary to protect luggage from adverse conditions, moisture, dust, etc. They have the form of baskets or boxes - closed containers. One of the advantages is increased aerodynamics, and the disadvantage is high cost.
3. Specialized racks for transporting sports equipment (bicycles, skis, etc.) - narrow functionality. Most often it belongs to the middle price segment. Aerodynamics are reduced due to the specific shape of the load. The installation is noted to be difficult.

Depending on the mounting method, VAZ luggage racks are:

• standard – installed on recesses on the roof, according to the car manufacturer’s instructions;
• roof rails;
• integrated roof rails;
• attached to the doorway - this is how a roof rack is installed on the roof of a VAZ 2112, 2110;
• with mounting on a T-shaped profile;
• with fastening to the drain;
• on magnets - rare, has a relatively low load capacity;
• through the interior (inflatable trunk).

This does not limit the process of selecting a luggage rack.

It is important to pay attention to the material of manufacture. You don't have to settle for soft metal car racks. Preference is given to steel types with galvanized coating or high-quality plastic

Preference is given to steel types with galvanized coating or high-quality plastic.

Eurodetail

One of the largest companies in the country for the production of luggage systems is Eurodetal. It has been on the market since 1998. Production is entirely based on the company’s own developments and uses materials only from Russian partners. The assortment is rich, there are luggage racks for almost any modern car.

On the roofs of many representatives of the “ten” class there is a Eurodetal car rack. For VAZ 2110, 2112 there are two options for open-type luggage systems of different materials: steel and aluminum.

The design consists of two rectangular crossbars, a support made of soft material so as not to scratch the car roof, and a mounting kit. Fastening occurs behind the doorway. Installation does not require special skills or specific tools. The price is affordable.

Ant

The Russian brand “Ant” is considered a budget option among car racks. Luggage systems of this brand are produced by. The target audience of the brand is owners of domestic cars, but there are also interesting options for lovers of foreign cars.

For LADA 110, you can install the roof rack using fasteners behind the doorway. The luggage system for VAZ 2110, 2112 consists of a pair of rectangular arches made of steel and coated with plastic, special supports and fasteners. The ease of installation of Ant brand racks is noted.

Homemade trunk

You should not discount the possibility of independently manufacturing a removable roof rack for a VAZ 2112, 2110 car. It is easier for an inexperienced craftsman to start with the easiest option. For work you will need the following materials:

• metal profile, aluminum is more convenient;
• with already installed roof rails, to create a fastening system you will need clamps for the muffler - 4 pieces (if there are no roof rails yet, install them, more on that below);
• polyurethane foam;
• grinding machine;
• fiberglass;
• dye.

Let's move on to production:

1. We saw the crossbars. The length of the profiles must correspond to the width of the car body.
2. We cover the crossbars on all sides with a dense layer of foam.
3. We wait for the polyurethane foam to dry and grind it down with a grinding machine. Then we give the profile the necessary shape - first a regular parallelepiped, then we change it to improve aerodynamics (grind down the corners).
4. We wrap the “arcs” in several layers with fiberglass - from 3 layers.
5. Let's paint.
6. While we wait for it to dry, we make fasteners. We file the clamps from the bottom so that the plate becomes even.
7. We drill holes in the crossbars, two on each side (it is clear that they must be symmetrical). A prerequisite is that the space between the holes coincides with the “ears” of the clamp.
8. We attach the crossbars to the roof rails.

VAZ-2110

Putting the “tenth” family into production line production cost VAZ quite a lot of money and effort. Due to the difficult economic situation, putting the “tenth” on the assembly line took a considerable time, although, according to the designers, the “tenth” model was ready for mass production already in 1992. The decision to put it into production was made twice, but for certain reasons adjustments were made to the design, and the decision had to be postponed. The first “ten”, which was properly processed by conveyor technology, was assembled on June 27, 1995, and the first production cars began to be produced only in 1996. “Ten” was perceived precisely as the first sign of better times. At least the VAZ workers themselves thought so.

Sports[ | ]

Lada 21106 2.0 L competed in the 2008 FIA WTCC International Championship, where it was used by the Russian Bears Motorsport team, car No. 27 Ladygin Kirill, No. 28 Viktor Shapovalov and No. 29 Jaap van Lagen.
Since 2009, the team has acquired factory status. In 2010, the Lada Sport team stopped participating in the WTCC. In a VAZ 21103, as part of the LUKOIL Racing Team, the Italian Alberto Scilla won the Russian circuit racing championship in the Supertourism class in 2001 and 2002, and in 2003, Alexey Dudukalo. From 2004 to 2006, a modification of the VAZ 21106 - 27 took part in the RTCC as part of the Lada Racing factory team. The team's pilots were Alexey Gruzdev (No. 79) and Sergey Nuzhdin (No. 80).

From 2001 to 2003, the VAZ 21124-27 modification participated in the Russian Championship in automobile-circuit racing in the “Supertourism” class; also in 2003, modification 2112-37 became the main car of the circuit monoclass of the National Racing Series “Lada Cup”. Since 2004, a permanent participant in the National class and the Russian RTCC racing series.

Since 1999, VAZ-21106 has participated in the Russian Circuit Racing Championship in the Line 2000 class (Touring), as part of the Motorika Scientific and Technical Center and as part of the AvtoVAZ factory team (except for the 2003 season). from 2004 to 2006 in RTCC on modification 21106 - 27

Based on modification 21106, a racing version of the VAZ-21106-27 car was produced, which later became the VAZ-21107, and the Lada WTCC was also built. Since 2008, participant of the WTCC racing series.

VAZ-2111

The previous modification of a similar body design – the legendary 2104 (“four”) – was already 15 years old by the time the production of 2111 began. VAZ-2111 is the first VAZ station wagon with front-wheel drive.

The trunk volume with a total vehicle load capacity of 500 kg varies from 490 to 1420 liters. This is due to the fact that the rear seats can be folded in such a way as to create a flat horizontal floor, and the backrest, if necessary, can easily be folded out in a ratio of 1:2. If there is a luggage structure, an additional 50 kg of cargo can be placed on the roof. Also, with a towbar, it is possible to tow a trailer up to 1000 kg, equipped with brakes. The car body is mounted on a supporting frame with rubber-metal elements, on which it rests at 10 points. Thanks to this solution, it was possible to reduce the level of vibration and noise in the cabin, and the body became stronger and more durable. The choice of engines for the 2111 is similar to the sedan. There is also a 21110 with an eight-valve 1500 cc engine. cm with a power of 76 l. With.; 21111 with a carburetor engine (from a VAZ-21083) with a volume of 1500 cubic meters. see and 21113 with a sixteen-valve engine with a capacity of 1600 cc. cm increased power.

There were also 3 configuration options - “standard”, “luxury” and “norm”. In 1997, together with the AVTOVAZ Research and Development Center, the DECON design group created a new comfortable SUV and called it “Tarzan”. The car is a hybrid of the body structure and frame chassis of the front-wheel drive models of the “tenth” family with transmission elements and main suspension components from the Niva (2121). Moreover, all units, except for the elongated cardan shafts and the frame itself, are serial.

Service

Maintenance typical for cars produced by AvtoVAZ. The main maintenance operations are changing the oil and oil filter. To change the lubricant, 3.2 liters of engine oil is required. In turn, 3.5 liters of lubricant fits into the engine.

The maintenance map looks like this:

TO-1: Oil change, oil filter replacement. Carry out after the first 1000-1500 km. This stage is also called the break-in stage, since the engine elements are grinding in.

TO-2: The second maintenance is carried out after 10,000 km. So, the engine oil and filter are changed again, as well as the air filter element. At this stage, the pressure on the engine is also measured and the valves are adjusted.

TO-3: At this stage, which is performed after 20,000 km, the standard procedure for changing the oil, replacing the fuel filter, as well as diagnosing all engine systems is carried out.

TO-4: The fourth maintenance is perhaps the simplest. After 30,000 km, only the oil and oil filter element are changed.

TO-5: The fifth maintenance is like a second wind for the engine. This time a lot of things are changing. So, let's look at which elements need to be replaced in the fifth maintenance:

• Change of oil.
• Replacing the oil filter.
• Replacing the air filter.
• Replacing the fuel filter element.
• The timing belt and roller are replaced.
• Alternator belt if necessary.
• Water pump.
• Valve cover gasket.
• Other items that need to be replaced.
• Valve adjustment, which adjusts the gas distribution mechanism.

Subsequent maintenance is carried out according to the 2-5 maintenance map for the corresponding mileage.