Lada Largus-cross 2022 tire sizes, PCD, wheel offset, fasteners and other car parameters

January 29, 2015 Lada.Online 444 343 99

The size of tires and wheels not only adds style to the car, but also greatly influences the vehicle's performance on the road. Each manufacturer indicates acceptable standard sizes, and AVTOVAZ is no exception. In this review, we will look at the wheel size of the Lada Largus.

Usually, the manufacturer, depending on the modification of the car, indicates several acceptable wheel sizes, Lada Largus is an exception. The instruction manual indicates the only wheel size for all trim levels: 185/65R15 . Lada Largus wheel parameters: 6Jx15, offset (ET) for R15 = ET50. Wheel hub bolt pattern 4x100. Everyone knows that the Lada Largus is a 2006 Dacia Logan MCV adapted for the Russian market. The technical characteristics of the foreign car indicate exactly the same wheel size.

Based on reviews and surveys of Lada Largus car owners, we can summarize:

1. The most popular tire size with a diameter of 14 inches turned out to be 185/70R14 , by the way, it is indicated in the table with tire pressure. Another less popular option is 165/80R14.
2. The majority use the standard wheel size 185/65R15 . Another popular size of the same radius is 195/65R15 . A few installed 205/60R15 and 195/60R15 tires on their cars.
3. Fans of larger wheels install tires: 205/55 R16 , 195/60 R16 and 195/55 R16.
4. R17 wheels: 205/50R17 , 205/45R17, 225/45R17 or 215/50R17.
5. Exclusive sizes: 215/35R18 and 215/40/18.

R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim in inches. The most popular wheel sizes are shown in bold.

When choosing wheels, you should take into account the full diameter of the wheel; it should not differ much from the standard one. Compatibility table:

Green indicates the minimum deviation of the wheel diameter (up to 3 mm); Orange indicates a diameter deviation from 3 to 6 mm.

Don't forget about the rim width:

Ideal tires for VAZ Largus Station Wagon 2014- (Cross) - 1.6

We strongly advise you to choose tires from the list recommended by the manufacturer. Incorrect selection of the standard size can increase the load on the bearings and suspension, resulting in breakdown and subsequent expensive repairs. In addition, the comfort, safety and life of both the driver and passengers depend on the choice of tires.

Our catalog contains tires for VAZ Largus Station Wagon 2014- (Cross) - 1.6 of all main types:

• Summer. For dry and wet roads in the summer season.
• Winter. Studded and Velcro, with a unique tread pattern and lugs that guarantee stability in snow and ice.
• All-season. An intermediate option, suitable for driving in both winter and summer.

If you are not sure that these tires for VAZ Largus Station Wagon 2014- (Cross) - 1.6 meet your requirements, or require special operating conditions, please contact our managers before purchasing. They will definitely select an option that will satisfy your needs 100%.

Which summer tires are best for Largus Cross cars?

Choosing summer tires for the Largus KrossTires on the Largus must necessarily correspond to the standard size of the wheel structure.
When choosing, the speed and weight index, brand and tread pattern are taken into account. The production date of the products plays an important role - if they were made more than 5 years ago, it is better to refuse such a purchase.

The pattern is divided into two types: asymmetrical, directional and symmetrical. The last option is considered the most popular. Since the symmetrical pattern is suitable for most cars. This option is considered as the most convenient for moving around the city. The main reason for choosing this pattern is low cost.

The directional tread pattern allows car owners to drive off-road, providing ideal directional stability and handling. Unfortunately, there is some noise when driving off-road.

Important! The asymmetrical pattern has better characteristics. This option helps ensure ideal directional stability and reduce the risk of aquaplaning.

These products have a high price.

When replacing wheel structures, it is necessary to select standard models. When installing large components, you will have to choose the appropriate tires with a low profile. To move on a flat road, it is better to use low-profile tires. This tire improves dynamic performance and handling.

Is it possible to increase the track on Largus

To install wide tires and not damage the fender liners, you will have to install spacers that increase the wheel track. This achieves two effects at once:

1. The car owner receives the desired wheel width.
2. Improves vehicle stability during high-speed maneuvers.

But there are also negative aspects - an increase in the track contributes to faster wear of the wheel bearings. As the length of the hub assembly increases, the pressure on the bearing increases. Because of this, it will fail ahead of schedule.

For this reason, increasing the track on the Lada Largus is not recommended.

General background information

Ranges of possible values ​​for tires and wheels Lada Largus Cross 2016.
Tires

Wheel disks

Photo

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Lada Largus Cross 2016?

3 types of rims:

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

• deterioration of management;
• uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

• increased fuel consumption;
• rapid wear of the outer tread segments;
• the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

What non-standard sizes can be supplied?

What wheels are suitable for the Largus fret?

Buy tires based on the full diameter of the wheel. It shouldn't be too different from the standard one.

Standard sizes allowed for installation.

Be sure to calculate the load capacity index. Depending on the model, 88 (560 kg), 92 (630 kg) and 91 (615 kg) are allowed. The speed index is indicated next to the load capacity. T – up to 190 km/h, H – up to 210, V – up to 240.

An approximate formula will come in handy. Calculate the mass of the car, the weight of all possible passengers and cargo. Divide by 4 (wheels). Add a little extra.

Important! Installing large wheels can lead to incorrect operation of the ABS and electronic dynamic stabilization system of the vehicle. The lighter the tires and wheels, the faster the vehicle accelerates.

So, a car will accelerate to 100 km/h 0.2 seconds faster if the wheel weight is 2 kg less

The lighter the tires and wheels, the faster the vehicle accelerates. Thus, a car will accelerate to 100 km/h 0.2 seconds faster if the wheel weight is 2 kg less.

Which disc is suitable for Lada Largus Cross

As you know, the prefix Cross in the name of the Lada model means that it is an off-road type vehicle. One of the most significant differences between the Cross version and its predecessor Lada Largus is the increased wheelbase. On a regular Largus, four 15-inch disks are installed by default. In Cross, the diameter was increased to 16. By the way, unlike many automakers who indicate possible variations in wheel diameters, AvtoVAZ clearly stated the only acceptable option for the wheel diameter.

But despite this, the task remains: to find out which disk can still be installed on this machine. Since the standard Lada Largus has been on the market for a longer time, it makes sense to turn to the reviews of its drivers. Their opinion: the version with 15-inch wheels is most often replaced with tires with a rim diameter of 14 units.

This car, as mentioned above, comes with 4 standard 16-inch wheels from the factory. And making them an inch smaller in diameter makes no sense. Because then the car, at least in terms of wheel parameters, will turn into an ordinary station wagon.

In addition to the diameter, AvtoVAZ also indicates other recommended parameters.

The recommended tire pressure is also indicated. The latter is selected individually by each driver, depending on driving style and personal preferences. The AvtoVAZ plant recommends increasing the pressure to 2.4 atmospheres on the front wheels and 2.6 atmospheres on the rear wheels (the difference is due to the fact that the car is rear-wheel drive).

But drivers of the Lada Largus station wagon claim from their own experience that these parameters are indicated only for factory tires. In reality, if you change tires, at this value the ride quality deteriorates, and the mark should be lowered to 2.1–2.2 atm. It should also be recalled that winter tires should have a tire pressure 0.2 atm higher. That is, in the case of Largus Cross it will be 2.6 and 2.8 atm, respectively.

The width of the Lada rim may vary by 1–1.5 inches (this is the allowed deviation for a disc with a diameter of 15 or more). The same width should be 25–30% less than the width of the tire profile. These are the deviations from the factory version of the wheel that are theoretically allowed when replacing a wheel on a Lada Largus Cross.

Reading time: 6 minutes

Choosing the right wheels for Largus from the Russian manufacturer Lada is quite simple. But you need to know that there are two versions of the car - Largus and Largus Cross. The second version is distinguished by increased cross-country ability and some design elements. It is also equipped with alloy wheels of a larger radius. The usual modification is equipped with stamped and cast products, depending on the configuration.

Wheels for Lada Largus Cross

Standard size

6×16 ET50

Disk options

Visual tire calculator »

The most popular tire models for Lada Largus Cross

le>

le>

le>

le>

le>

le>

le>

At the moment, there are 319 tire modifications for the Lada Largus Cross on Mosavtoshina with an average rating of 4.41/5. Add your review.

Other Lada models: Lada 110, Lada 111, Lada 1111 Oka, Lada 112, Lada 1200, Lada 1200DL, Lada 1300, Lada 1300SL, Lada 1500, Lada 2104, Lada 2105, Lada 2107, Lada 2108, Lada 2109, Lada 210 99, Lada 4X4, Lada 4×4 Bronto, Lada 4×4 Urban, Lada 4×4 Urban, Lada Classics, Lada Fora, Lada Granta, Lada Granta Cross, Lada Granta Sport, Lada Kalina Cross, Lada Kalina Sport, Lada Largus Cross, Lada Nadezhda, Lada Niva, Lada Niva II, Lada Niva II, Lada Nova, Lada Priora, Lada Riva, Lada Samara, Lada Taiga, Lada Vesta, Lada Vesta Cross, Lada Vesta Sport, Lada Vesta SW, Lada Vesta SW Cross, Lada XRay, Lada XRAY Cross, Lada Kalina, Lada Kalina Cross, Lada Largus, Lada Largus Cross,

Repair service:

How to choose alloy wheels

For the Largus Cross car model, there are many different variations for installing wheel rims. They vary in manufacturing methods, shapes, cost and design.

The characteristics, price and controllability of the machine depend as much as possible on the method of production of the products. For Lada Largus Cross, wheels are made from the following materials:

• Steel. Conventional stamped products are made from it.
• Aluminum and magnesium. Cast or alloy wheels are made from these materials.
• Titanium. In combination with aluminum and magnesium it is a raw material for the production of forged products.

As for the price, stamped wheels are the cheapest. Cast ones are considered more expensive and of higher quality. And forged products provide maximum strength and wear resistance. They are also the most expensive in the list of products presented.

In this case, forged wheels have the minimum weight and maximum strength characteristics. They have long been known for their use in auto racing and have become widespread in the automotive industry. But the forging process does not allow creating a variety of shapes and textures, so such products are limited in design solutions.

Stamped steel wheels can take any shape. Their prices also please car owners. However, high weight and low characteristics negate all the advantages of this manufacturing method.

You might be interested in this About the wheel bolt pattern for the domestic Volga car

Casting is another matter. The process allows you to create products of any shape and texture. In terms of weight and strength, these products are slightly inferior to forged ones. But the ability to create a product of any size, width and shape quite cheaply makes these products extremely common on auto store shelves.

You can choose cast products for the Largus Cross machine from a wide range. Products from many brands of various colors, parameters and sizes are presented. The most famous companies Sparco, MOMO and Enkei are famous for their quality. You can choose cheaper products.

Alloy wheels are highly resistant to possible damage. Also among the advantages is light weight, due to which the car has greater dynamics and better handling.

DIY tire replacement rules

In order to save money, many car enthusiasts are thinking about replacing tires themselves. The process is not the easiest, but doable. To work, you will need a balloon, mounting blades, a jack and a compressor or pump. When performing the procedure, you should take into account some tricks, without which this event is doomed to failure.

Removing the tire from the rim

First you need to remove the wheel from the hub. Then it is laid on the ground so that the nipple nipple is at the top. All the air is released from the tube or tire, in the case of a tubeless tire, and the nipple nipple is recessed inside. You need to stand on the wheel with your feet so that the edge of the tire separates from the rim of the disc. Sometimes extra force may be required if the rubber sticks to the metal.

A mounting blade is inserted into the gap between the edge of the tire and the disk, then a second one. The main task is to turn the sidewall of the tire beyond the edge of the rim. If the wheel has a tube, it is pulled out through the resulting gap. If the tire is tubeless, you need to unscrew the entire side of the tire by the rim, then unscrew the second sidewall of the tire using the same edge of the rim and remove it from the rim.

Mounting a tire on a rim

Before installation, make sure that the tire is the correct size and has no defects. It is recommended to remove the balancing weights and the old nipple. When installing, you should take into account the markings on the tire, usually the direction of travel in the form of arrows.

To facilitate the installation task, you can apply a soap solution to the edge of the tire and the rim of the disk, but within reasonable limits, otherwise the tire will slip. Installation is carried out in the reverse order of removal. First, one edge of the tire is put on, after which the second one is wound on the rim.

Tire pressure and inflation

For wheels with a tube, everything is simple - you need to inflate the tube more than required in the manual (the pressure in Largus tires is no more than 2.1 atmospheres). This is necessary so that the tube sits evenly in the tire, after which you can deflate the air to the required values. For a tubeless tire the process is more complicated. When you try to inflate it, air will escape through the gap between the edge of the rim and the sidewalls of the tire.

You need to inflate any other wheel to 4 atmospheres. After this, remove the hose from the pump and put the end without a fitting on the nipple of the installed tire, the other end with a fitting is put on the inflated tire. Air under high pressure and at high speed will quickly fill an empty tire. This will be enough for it to sit tightly on the rim without having time to let air through the gaps. But it’s better to go to a tire shop, where this procedure will take a few minutes using special equipment. After the procedure, you will need to balance the wheels, which cannot be done in a garage without a machine.

Unlike all previous AvtoVAZ models, larger wheels are initially installed on Largus. This way, this model further emphasizes its relationship with other brands. Lada Largus is a joint product of AvtoVAZ and the Nissan-Renault concern.

Weight matters

A car disk is a simple flywheel mounted on a hub. To set it in motion, you need to expend a certain amount of energy, the source of which is fuel. And the greater the mass of the wheel, the more fuel will be required to spin it. But it is much more difficult to stop the wheel when its rotation speed is very high. At that moment, a very large load is placed on the braking system. Therefore, not only the comfort and controllability of the car, but also the safety of passengers in the cabin depends on the quality of the disc and the materials used to make it.

Modern wheels are made of steel and various light alloys, which give them a number of advantages:

1. Welded steel disc. This is a familiar stamped version that boasts a low price and durability. It is these discs that have the heaviest weight, are easily deformed and are more susceptible to corrosion than others. But with all their shortcomings, they are not so bad - if after falling into a hole the disk is dented, this can be quickly corrected at a service station.
2. Alloy wheels (cast and forged). They have much lighter weight, high anti-corrosion and strength properties and many design solutions. But they are already much more expensive. When subjected to strong impacts, alloy wheels do not bend like steel wheels, but rather crack. Forged ones can withstand the strongest blows and are practically impossible to bend.

Read more: Shelf life of diesel fuel in a barrel

About summer tires for Largus 185 65 R15

According to car owners, a tire from Renault Logan 5.5×14/4×100 D60.1 ET43 is ideal, but the Lada Largus will need a tire size with parameters 185/70 R14. Factory-assembled 16-inch Largus Cross alloy wheels. They have unique parameters: width is 6 inches, drilling is 4x100, offset is ET50, CO is D60.1. The declared size of parts for the Lada Cross corresponds to 205/65 R16 tires. AvtoVAZ supplies Continental Premium Contact tires with a low profile (55% of the width).

The smaller the unsprung mass (this includes the mass of tires and wheels), the better the car will hold the road and accelerate faster. For example, if you install wheels that are 2 kg lighter each, then acceleration to 100 km/h will be reduced to 0.2 seconds.

Source kolesa.guru

This is not a problem, but it might come in handy for someone. The question arose about the size of tires for the winter. On the website, many write that 205/60/R16 fits without problems. Well, on the Largus Cross this size looks absolutely perfect. Moreover, in my opinion In my opinion, this size on the Cross should be stock from the factory.

Yesterday I tested the tires especially for RUSTEM50. And unfortunately I must note that there are problems (If you twist the steering wheel all the way and try to turn sharply, the rubber catches on the fender liner, not much, but there is a characteristic sound. Otherwise, jumping over police officers and combing have not yet noticed any problems .Now we have a thaw, but as soon as the snow porridge appears, I’ll test for frozen ice under the fender liners and report back.

Source www.drive2.ru

The size of tires and wheels not only adds style to the car, but also greatly influences the vehicle's performance on the road. Each manufacturer indicates acceptable standard sizes, and AvtoVAZ is no exception. In this review, we will look at the wheel size of the Lada Largus.

Usually, the manufacturer, depending on the modification of the car, indicates several acceptable wheel sizes, Lada Largus is an exception. The instruction manual indicates the only wheel size for all trim levels: 185/65R15. Lada Largus wheel parameters: 6Jx15, offset (ET) for R15 = ET50. Wheel hub bolt pattern 4x100. Everyone knows that the Lada Largus is a 2006 Dacia Logan MCV adapted for the Russian market. The technical characteristics of the foreign car indicate exactly the same wheel size.

Based on reviews and surveys of Lada Largus car owners, we can summarize:

1. The most popular tire size with a diameter of 14 inches turned out to be 185/70R14; by the way, it is indicated in the table with tire pressure. Another less popular option is 165/80R14.
2. The majority use the standard wheel size 185/65R15. Another popular size of the same radius is 195/65R15. A few installed 205/60R15 and 195/60R15 tires on their cars.
3. Fans of larger wheels install tires: 205/55 R16, 195/60 R16 and 195/55 R16.
4. R17 wheels: 205/50R17, 205/45R17, 225/45R17 or 215/50R17.
5. Exclusive sizes: 215/35R18 and 215/40/18.

R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim in inches. The most popular wheel sizes are shown in bold.

When choosing wheels, you should take into account the full diameter of the wheel; it should not differ much from the standard one. Compatibility table:

Green indicates the minimum deviation of the wheel diameter (up to 3 mm); Orange indicates a diameter deviation from 3 to 6 mm.

Don't forget about the rim width:

Basic dimensions

The main indicators of the dimensions of any car, first of all, are understood as the dimensions of the body.
Everyone knows that Lada-Largus is a model made on the Renault Dasia Logan MSV platform (2006 variation), but completely adapted for the Russian market. Considering such a relationship between the two cars, it seems surprising that there are some differences in their dimensions, even if they are not significant. Despite the fact that the Lada-Largus is available in three body variations: a station wagon (5 seats), a minivan (7 seats) and a van (2 seats) - the dimensions of all variations are the same, with the exception of height. More precisely, the machine dimensions are as follows (in mm):

• length – 4470;
• width – 1750;
• width including side mirrors – 2003;
• height – 1636 (station wagon/minivan) and 1650 (van);
• height taking into account restylings - 1670 (station wagon/minivan) and 1686 (van);
• ground clearance - 145-175, which depends on the load of the car (210-170 - for Lada-Largus Cross);
• wheelbase - 2900;
• front track - 1469;
• rear track - 1466;
• front/rear overhangs – 797/771.

Having analyzed the dimensions of the car, we can conclude that the car is quite large for a B-class. Such circumstances emerge not only in theory, but also in practice, judging by the reviews of the owners. Many of them note that the dimensions fit quite well into the aesthetic concept of the car and do not cause any inconvenience during its operation.

What is the tire pressure

It is important to check the tire pressure level before each trip. If the value is too low:

• adhesion properties deteriorate;
• rubber may burst during a sharp turn;
• the tread wears unevenly;
• fuel consumption increases.

Excessive pressure also causes problems:

• adhesion properties with the road surface deteriorate;
• the car reacts more sensitively to all road irregularities;
• the load on the main body elements increases;
• There are extraneous noises in the cabin.

You can familiarize yourself with the recommended pressure parameters yourself. Detailed information about this is located on a special metal plate placed on the car door. For the front wheels, 2.4 bar is normal, for the rear wheels – 2.6. Moreover, the load and the number of passengers in the cabin do not have any significance.

Pressure and other parameters

Recommended tire pressure:

• 2.4-2.6 MPa (for R15 in the simple version);
• 2.5 MPa (for R16 in the Cross version).

You can also find another designation on the rubber, which indicates the following characteristics:

• load index;
• speed index.

The first (two or three) digits indicate the load index per tire, and the Latin letter indicates the maximum speed tolerance. In our case, these could be the following values.

• 92H – 630 kg. and 210 km/h. (relevant for simple versions of Largus with R15);
• 88T – 560 kg. and 190 km/h. (relevant for simple versions of Largus with R15);
• 91H – 615 kg. and 210 km/h. (relevant for the Largus Cross version with R16);
• 91V – 615 kg. and 240 km/h. (relevant for the Largus Cross version with R16).

Manufacturing methods and other factors

Linear parameters are not the only deciding factor. Some also choose to change the material the disc is made from. This is an important point - the material from which the purchased disc will be made, as well as the technology for its manufacture. The most popular types of discs found on sale are made of steel, aluminum, magnesium and titanium.

This series is arranged in ascending order of cost. At the same time, steel wheels are the heaviest, but flexible. Aluminum and magnesium alloys produce lightweight parts. This certainly significantly reduces fuel consumption. But such rims are quite easy to damage. But titanium gives the highest strength index. This is what you pay the most.

But for some drivers, it is not necessary to wait for damage to “change” the car. This applies to tuning enthusiasts. But here's what you need to know when choosing the color and appearance of a disc, which is made in different ways. There are stamped, cast and forged discs. So, manufacturing technology affects the ability to obtain a certain color and variety of styles. Stamped and forged wheels, due to the peculiarities of the technology, cannot be presented to customers in aesthetic diversity. But cast ones are easy. They are represented on the market in the largest number of positions.

The degree of damage and fuel consumption also depend on the method of manufacturing the disc. Stamped - they bend when hit, but do not crack. They can be restored. And due to the heavy weight of the car, gasoline costs increase. Another disadvantage is their susceptibility to corrosion, which cannot be said about cast products. But if the cast disc is cracked, it cannot be repaired. But the most expensive type of disc is forged. It is very difficult to deform, and it weighs little.

The manufacturer's recommendations also indicate what the optimal tire pressure should be. After all, it happens that when drivers change cars, out of habit they pump up the tire to one level, but it turns out to be either too low or too high. Both are bad. At a low level, the rubber on the disc is damaged, and at a high level, there is a high probability of breaking through the ramp or damaging the spool.

Compliance criteria for linear dimensions

Wheels with a diameter of 16 inches are standard by default for the Largus Cross when installed at the factory. And if the rim is damaged beyond repair, AvtoVAZ recommends replacing the damaged one with a disc that exactly matches the factory parameters: sixteen-inch, because the dimensions and shape of the wheel were designed for the safest and most trouble-free driving.

Not all motorists follow this rule. Many are guided by appearance and buy a more beautiful rim, not always taking into account its difference in diameter, width, etc. Let's take a closer look at the parameters that can or cannot be changed when installing a new disk.

Each manufacturer recommends certain wheel characteristics. They are indicated in the car’s passport data in the form of a formula. For example, this: 6J15PCD4-98et35DIA58.6, where 6J15 is the width and diameter of the rim in inches, the numbers 4 and 98 indicate, respectively, the number of bolt holes and the distance between the bolts in mm. Et - disc “overhang” (extrusion depth relative to the rim axis). This parameter can be either positive or negative, or zero. 58.6 is the diameter of the central hole in mm.

Purchasing a wheel other than the factory one in the above dimensions affects:

• quality of use of the vehicle chassis;
• suspension wear period;
• driving safety;
• risk of being denied warranty service.

The larger the rim diameter, the smaller the tire profile should be. The profile is also called the height of the tire. This is the vertical distance from where the wheel sits on the tire to the most protruding part of the tread. So this is what we get by increasing the rim. The wheel becomes lighter due to the reduction of the same tire profile, the car becomes more controllable, has better grip on the road, and, accordingly, becomes more stable.

But by increasing the diameter, you reduce the degree of passability of uneven areas, for example, when driving over rough terrain. And also due to the fact that there is less rubber between the rim and the road, it is easier to damage it. There is no point in reducing the profile from its rated value if you drive on poor-quality road surfaces.

The diameter of the center hole may be slightly larger than the diameter of the hub (the central part on which the disc is mounted). In this case, an additional adapter ring is used for installation and balancing.

If the diameter of the hole is smaller than the diameter of the hub, such a rim is not suitable: it simply cannot be secured.

Wheels for cars

Lada Largus is a station wagon with increased capability for transporting cargo. The car was released in 2011. The basis for the car was the Dacia Logan model, which is produced in Romania. "Largus" immediately became quite popular among car enthusiasts due to its increased capacity, low price and ease of maintenance.

Original alloy wheels "Lada Largus"

For any vehicle, wheels and tires are more than just a design element. It is on them that the behavior of the car on the road depends as much as possible. It is customary for all car manufacturers to indicate recommended dimensions for all their models. The AvtoVAZ concern is no exception.

However, it is not always and not among all manufacturers that it is customary to indicate the permissible dimensions and parameters of wheels. Often there are several options listed without specifying the minimum and maximum allowable ones. For example, in the official instruction manual for the Lada, the parameters of the wheels on the Largus are indicated in only two options:

• The usual model of the Largus station wagon should be equipped with products with a radius of R15.
• The all-terrain model "Largus Cross" is equipped with wheels size R16.

The AvtoVAZ concern does not recommend installing wheels of other sizes. Basically, they are replaced when the season changes, possible damage occurs, in which it is undesirable to use the product. In this case, replacing the disks with identical ones is explained by traffic safety.

Wheels for Lada Largus R15

Installing unsuitable wheels can affect the following characteristics:

• traffic safety;
• warranty conditions for the car, if the period has not yet expired;
• high-quality work of parts and suspension units;
• wear of chassis parts.

Since the car has become quite widespread on the roads of the country, there are many offers for the sale of wheels and tires for it. In the original configuration, the Largus is equipped with stamped wheels. In this case, many car enthusiasts are not satisfied with the appearance and characteristics of the car in motion. Then the stamped products are changed to cast or forged. Wheels on Largus size 15 are the only ones provided by the manufacturer, regardless of whether they are stamped or cast.

The Largus Cross model, even in the basic configuration, comes with installed cast parts.

Original alloy wheels on Largus Cross

If the owner has decided to replace the wheels, then there is plenty to choose from. The market offers stamped, cast and forged products of various sizes, colors and designs.

Car enthusiasts have the opportunity to purchase both original rims from the manufacturer and all kinds of replicas or used products. Various global manufacturers of cast and forged products are widely represented. These can be very popular, high-quality and expensive brands or lesser-known inexpensive ones.

As for seasonality, professionals recommend installing products with a smaller width and diameter for the winter. This is done to provide a higher level of stability on slippery roads and in bad weather. In the warm season, the size of wheels and tires does not play such a fundamental role. On the contrary, to get maximum stability and controllability, you need to choose wheels of larger diameter and width.

Selection of tires and wheels for the Lada Largus Cross car

Using automatic selection of tires and wheels for the Lada Largus Cross , you can avoid many problems associated with their compatibility and compliance with the recommendations of automakers. The fact is that tires and rims have a significant impact on most of the basic performance characteristics of a vehicle. In addition, one cannot fail to note the importance of tires and rims as active safety elements. That is why the choice between them should be made as responsibly as possible, which presupposes the presence of a whole range of knowledge about these products. Unfortunately, most car owners prefer not to go into such technical nuances. Regardless of this, the automatic selection system will prove to be extremely useful, i.e., it allows you to minimize the likelihood of making the wrong decision when choosing certain tires and rims. And thanks to the widest range presented in the Mosavtoshina online store, it is very diverse.

• home
• Car brands
• Lada
• Wheel and rim sizes for Lada Largus Cross
• 2016

Tire size for Lada Largus

Acceptable parameters are indicated depending on the modification of the vehicle; the Lada Largus tire in this version is an exception. The operating manual indicates the only tire size for the Largus car for all trim levels - 185/65 R15.

Product size Lada Largus

Design parameters for Lada largus are designated as follows: 6Jx15, offset (ET) for R15 = ET50. The hub bolt pattern is 4×100. The Lada Largus car is adapted for the Russian market. The technical passport of the Largus foreign car indicates the same wheel size.

Important! The most popular tire size with a diameter of 14 inches was 185/70 R14. Another less popular option is the 165/80 R14 model. Many motorists install the standard wheel size 185/65 R15

Another popular size of the same diameter is 195/65 R15. Some people installed 205/60 R15 and 195/60 R15 tires on their cars

Many motorists set the standard wheel size to 185/65 R15. Another popular size of the same diameter is 195/65 R15. A few installed 205/60 R15 and 195/60 R15 tires on their cars.

Many motorists like to install large tires: 205/55 R16, 195/60 R16 and 195/55 R16.

R17 wheels: 205/50 R17, 205/45 R17, 225/45 R17 or 215/50 R17.

Exclusive sizes: 215/35 R18 and 215/40/18.

Note! R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim, measured in inches.

Dimensions and dimensions

and “Largus Cross” wheels only in sizes R15 and R16. Installation of products on 17 and 18 inches is possible. However, in this case the warranty will be lost. The comfort level on large wheels will also decrease.

For 15-inch wheels, 195/5 R15 tires are often used; sometimes you can find sizes 205/60 R15, 195/60 R15. Tuning enthusiasts most often install wheels of sizes 205/55 R16, 195/60 R16. Sometimes you can find large ones, such as R17: 215/50 R17, 205/50 R17, and a very rare option are the sizes 215/40 R18, 215/35 R18.

Review of the best summer and winter tires

When choosing tires, owners take into account the following points:

manufacturer; operating conditions (pay attention to the pattern, tread); size; price category.

Based on reviews from Lada Largus owners, let's summarize.

The majority of survey participants adhere to the recommended sizes. The most popular non-standard tires are 195/65 R15, 195/60 R15, 205/60 R15.

Top 5 summer tires:

Nokian (HAKKA GREEN 2, Nordman SX); Michelin (Energy XM2); Continental (ContiPremiumContact 5); Matador (MP 44 Elite 3) Amtel (Planet T-301)

Attention. Complaints about rapid wear

They can burst at high speed.

The tread pattern is:

• asymmetrical;
• directed;
• symmetrical (universal, therefore the most popular).

The latter is ideal for use around the city. It has an affordable price. The downside is unsatisfactory handling at high speed, on wet road surfaces, and when making sharp turns.

Top 5 winter tires:

• Nokian;
• Michelin;
• Continental;
• Goodyear;
• Gislaved/Hankook/Bridgestone.

It is recommended to install standard winter tires. Studded or non-studded - depends on personal preferences and operating conditions. The first option is more popular among Lada Largus owners.

The pattern and tread height are important. You shouldn't skimp on winter tires.

"All-season" is not the best option. They lose to seasonal tires in most respects. In winter, there is a high risk of getting into an accident on such tires. Application. Table from the instructions.

What tire sizes does the manufacturer recommend to install?

It is worth noting: the size of tires and wheels not only makes the appearance of the car more stylish. But it also affects the behavior of the vehicle on the road. Lada Largus is produced by the AvtoVAZ concern. The manufacturer guarantees good handling and no problems with the suspension only when using wheels of the recommended sizes.

Some manufacturers specify several acceptable wheel types for their vehicle. However, Largus is an exception. The AvtoVAZ concern has established only 1 acceptable type of wheels. It has a standard size of 185/65 mm with a diameter of 15 inches. Standard parameters for Lada Largus wheels:

• 6J at 15;
• departure (ET) – ET50;
• hub bolt pattern – 4 × 100 mm.

However, it is worth noting that the Lada Largus is a Dacia Logan MCV 2006 car adapted for the Russian market. The technical characteristics of the foreign car indicate a similar size for tires and wheels. Therefore, when choosing tires, you can be guided by the recommendations specifically for the Logan MCV 2006.

The Lada Largus series is presented in three separate versions - R90, F90, Cross. You can purchase versions with 7 or 5 seats. There is also a cargo version. It is labeled as F90. There are some distinctive features for the Cross version of the car.

Options

The AvtoVAZ concern added the Cross prefix to the model name for a reason. It is understood that the model has increased off-road capabilities.

The parameters of the basic wheel rims are as follows:

• drilling parameter is 4×100;
• wheel width - 7.0 J;
• disc offset is ET 40;
• centering hole size - 60.1.

Knowing all the various methods for producing wheel rims and their advantages, you can choose a set of quality products for Lada Largus. In order for the disc to fit perfectly, you also need to know the basic parameters and dimensions of the mounts.

Tires directly affect fuel consumption, vehicle cross-country ability, its behavior on the road, and noise level. The appearance of the vehicle also depends on the tires.

AvtoVAZ recommends a certain wheel size for Lada Largus. Let's consider the parameters allowed by the manufacturer and study possible variations. Let's get acquainted with the top 5 winter and summer tires (according to owner reviews).

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

Lada Largus is represented by three models (Largus R90, F90, Cross). Options with 7 or 5 seats are produced (except for the F90 cargo vehicle). The basic requirements for tires and wheels differ only for the Lada Largus CROSS. Parameters important when choosing wheels are indicated in the user manual. The recommended index of load capacity and speed, the standard air pressure are also set in the instructions.

Owners consider the categories of acceptable sizes. One of the reasons is the range of prices; manufacturers have better options among non-standard tires. Sometimes rubber remains from an old car. Some people think that the larger the wheel, the better. Let's learn how to choose safe wheels.

Lada Largus Cross

From the factory, the off-road version of the Largus is equipped with R16 wheels with the following parameters:

• disc width - 6J;
• drilling - 4×100;
• departure - ET 50;
• centering hole - DIA 60.1.

Tires used are Continental Premium Contact with dimensions 205/55 R16.

When installing tires or wheels that differ in parameters

from the recommended ones, you can:

• be refused warranty repair of the chassis;
• be stopped by a traffic police inspector, who has the right to draw up a report on the car’s non-compliance with the requirements of the Technical Regulations;
• fail to pass technical inspection.

Let us remind you that other instructions for modifying a station wagon and a van can be found in this category or by content.

Wheels and tires from the factory

The following drives are installed in the new Largus:

• 6Jx15 ET50;
• 6.5Jx16 ET48 (Cross version).

The above is deciphered as follows:

• 6J (6.5J) is the width of the rim (measured in inches);
• 15 (16) is the seat size (diameter) of the rubber (measured in inches);
• ET50 (ET48) – disc offset (in millimeters).

In the table you can find out some of their characteristics.

Now let's look at the tires that are installed from the factory on new Largus, they have the following parameters:

• 185/65/R15;
• 205/55/R16 (Cross version).

These parameters are deciphered as follows:

• 185 (205) – profile width (measured in millimeters);
• 65 (55) – profile height (indicated as a percentage of the width);
• R – radial cord winding is used;
• 15 (16) – tire size (diameter) (measured in inches)

Is it possible to install non-standard wheels with standard 15-inch ones?

Many drivers still have 14-inch wheels from their previous cars. They want to install them instead of the required standard 15-inch ones to save money. Moreover, stamping is heavy, but these seem practical in winter.

When installing non-standard parts, problems arise in the caliper bracket, which protrudes strongly relative to the plane of contact with the hub.

There is no gap when installing 14-inch wheels; When the nuts are tightened, the disc does not spin. The non-standard 15-inch ones also do not spin, but rub against the protruding bracket. And 16-inch ones create the necessary gap.

There are products with a shorter offset; when they are installed, the wheels will be positioned wider, this will lead to a change in the load on the bearings, and road dirt will fly onto the side of the car. If you put 6.5-inch wheels with an offset of 45 on a car, the wheel will hit. If there is a warranty on the car, certified K&K products are recommended.

So, of course, you can save money and install non-standard, non-original parts, but in this case the driving performance of the car is lost

When purchasing original spare parts, when deciding which wheels are suitable for Largus, you also need to pay attention to the diameter, width, choosing the most suitable option, taking into account the pros and cons of each type

Selection of tires and wheels for the Lada Largus Cross 2016 1.6i

Selecting tires and wheels for the Lada Largus Cross 1.6i 2016 reduces the risk of problems due to mistakes made by car owners when choosing them independently. As a rule, this is due to the lack of appropriate knowledge about a number of parameters that must be taken into account. This is what in many cases is responsible not only for the difficulties that arise when installing rims and tires, but also for negative changes in handling, fuel efficiency and dynamic qualities. The Mosavtoshina online store uses a wheel and tire selection system, the accuracy of which is at an impeccable level. This is ensured by the vastness of the special database, which contains a lot of technical information on almost all modern cars and trucks. To use this information to search for suitable options, the user simply needs to indicate the make, model, year of manufacture and modification of his own vehicle.

Sources used:

• https://xn--80aal0a.xn--80asehdb/reviews-tests/lada-largus-reviews-tests/253-rekomendovannyy-razmer-diskov-i-shin-lada-largus.html
• https://razmerkoles.ru/size/lada/largus-cross/2020/
• https://mosautoshina.ru/auto/lada/largus-cross/
• https://razmerkoles.ru/size/lada/largus-cross/2016/
• https://mosautoshina.ru/auto/lada/largus-cross/2016/1.6i-/