Thresholds for Lada Vesta SV Cross - overlays, platforms, running boards. Video review and description of possible designs

On Lada Vesta cars, the car thresholds located in the doors are not protected in any way, as a result of which they are most susceptible to physical impact. But this place is considered weak for any car, the fact is that over time, although not arbitrarily, the threshold will be stepped on, and children can also use it as a lifting step, all this will have a detrimental effect on the paintwork of the car. You can protect your car by installing linings, which come in several types:

• Plastic
• Stainless steel with inscription
• Embossed stainless steel

All of these lining options are equally easy to install on the Vesta fret; their main difference is their appearance. Stainless steel trims will give the car a stylish look; they are usually made with a model inscription, and sometimes this inscription is embossed. This option looks a little more attractive, but adds maintenance problems. The fact is that the dirt that gets on the threshold will get stuck in the embossed metal, when it can simply be wiped off with a rag from a regular lining.

In addition, there are plastic linings, they will look worse than the previous option, but they will protect the threshold even better. The fact is that the trim covers the entire threshold of the Lada Vesta, starting from the rubber door seal and almost to the very edge. The price of such overlays will also be a plus; you can buy them for ~650 rubles, the set consists of four pieces for each car threshold.

Door sills for Lada Vesta Cross

The purpose of installing door sills on the Lada Vesta Cross is to improve the appearance of the car, as well as protect the sills from damage. If I can agree with the first, then the second is always questionable to me. The fact is that although they can somehow protect the plastic linings from damage, they are unlikely to protect them from corrosion. During the operation of the car, dirt and moisture accumulate under the linings and do not dry out. This whole mixture has a very bad effect on the paintwork of the car. Due to prolonged exposure to dirt and moisture, the paintwork breaks down, revealing bare metal. Soon it begins to rust and rot. If you do not react in time, the metal will collapse and through holes will form. It is important to understand that if the car has door sills installed or you are just going to install them, then do not be lazy and additionally treat the hidden places with special means - anti-gravel, mastic, etc.

The door sill covers for the Lada Vesta Cross look pretty good:

They really fit very well into the overall philosophy of the car and don’t seem like something pretentious or unnecessary. Everything is very well done and harmonious. Many people on the Internet criticize the fact that they are not colored, but that is the whole point. They are specially made of black plastic to provide a contrast between the body colors and the arch and sill trims.

The door sill covers are not yet available on the official website Lada.ru, but they can be purchased from official dealers. This part can also be ordered through an online store, as well as purchased in a simple store, if there are any in your city.

How to install stainless steel door sill trims on Lada Vesta with your own hands

The set consists of four trims, two large for the front door sills and two small for the rear. Double-sided tape is applied around the perimeter of the parts, so installation only involves gluing the parts correctly.

Before installation, we degrease the car threshold, to do this we wipe it with a special product (degreaser), if this is not available, use another liquid containing alcohol, but first make sure that there are no contraindications for use on painted parts. Degreasing will ensure good adhesion of the trim to the threshold.

Now we remove the protective film of the tape from the ends of the linings, as shown in the photo above, and also bend the edges of the protective film in different directions.

We apply the trim in the center of the threshold and pull out the protective film of the tape at the ends that we bent earlier. Use your fingers to press the part around the perimeter so that the gluing is uniform. The inscription “Lada Vesta” should be read from the outside of the car, and not vice versa. The last step is to remove the shipping (blue) film from the parts, if present.

Metal thresholds for Lada Vesta SV Cross

In addition to plastic trims, which serve primarily a decorative function, the Lada Vesta Cross SV also has metal thresholds. This is a kind of tuning that looks very impressive, and at the same time, protects the car body from damage.

One of the first to start producing metal thresholds for the Lada Vesta SV Cross was the RUSSTAL GROUP company, specializing in the production of stainless steel products. In this case, a set of thresholds for the Lada Vesta Cross can be found under article number LVT0028491, which we will do by going to the Autolife42.ru website.

There are also 2 more options with article numbers LVT0028492 and LVT0028493. They are not very different from each other. Made from stainless steel pipe with a diameter of 63 mm. The only difference is in the plugs of the pipe itself.

Which thresholds are better and is it worth installing them?

Each driver decides for himself whether to install additional thresholds or overlays on a Lada Vesta car. We can definitely say that they really protect this part of the body from damage, but it is better to treat the surface under the linings with an anti-corrosion compound so that the moisture accumulating under them does not damage the coating.

The best tuning option would be a metal footrest, which looks stylish and provides the best protection and comfort. Such a threshold costs much more than conventional linings. Therefore, most drivers still choose chrome parts, which are very easy to attach with double-sided tape, and which also provide good protection.

Side steps for Lada Vesta SV Cross

What is an SUV or crossover without a full-fledged running board? A running board is a must-have accessory for any crossover. For Lada Vesta SW Cross this accessory is also available for sale. It is called a platform threshold and is produced by Rival. Regarding Vesta Cross, the company has a number of different thresholds for this car model: Threshold-platform “Bmw-Style” D180AL + fastener kit, RIVAL, Lada Vesta SW Cross 2017- Article: D180AL.6003.1 Threshold-platform “Premium” A180ALP + kit fasteners, RIVAL, Lada Vesta SW Cross 2017- Article number: A180ALP.6003.1 Threshold platform “Black” F180ALB + fastener kit, RIVAL, Lada Vesta SW Cross 2017- Article number: F180ALB.6003.1 Threshold platform “Silver” F180AL + kit of fasteners, RIVAL, Lada Vesta SW Cross 2017- Article: F180AL.6003.1 Threshold-platform “Black” A180ALB + fastening kit, RIVAL, Lada Vesta SW Cross 2017- Article: A180ALB.6003.1

These thresholds look very cool. Take a look for yourself, although the photo does not convey all the impressiveness. By the way, the company has a video about installing their thresholds on Vesta SV Cross.

Which overlays to choose? Brief overview of manufacturers and prices

Door sills for the Lada Vesta car are produced by various companies. In addition to the original AvtoVAZ ones, you can purchase accessories from the following manufacturers:

Related link:

Adjusting the windshield washer nozzles of Lada Vesta.

Plastic door sills are much cheaper than metal ones. But the latter are more durable and serve as an excellent addition to the design of the car, unlike plastic ones, which practically do not change the appearance of the body.

The cost of accessories directly depends on their quality. Cheaper pads are made of thin metal or plastic and can burst or lose their shape in a fairly short time.

Instructions for installing the trim

Included with the overhead devices is double-sided tape, which allows you to glue the element to the threshold yourself. Step-by-step algorithm of actions:

1. The front mudguard is removed.
2. The installation location is marked on the threshold.
3. The surface is degreased.
4. The protective film is removed from the tape. One side is glued to the overlay.
5. The product is applied 2 mm below the edge radius and pressed forcefully for several seconds.

You can also use special glue. It processes the entire inside of the overhead device. After pressing, the remaining glue that has gone beyond the boundaries is removed with a rag.

Purpose

Thresholds on Vesta will not only improve the appearance of the car, but also:

• protect the car from damage and scratches;
• will help hide defects.

There are classic and sporty versions of these products. The latest variation is mounted on the Cross SW sedan. These parts are made from plastic, metal or mixed raw materials. The standard option costs about 2,500 rubles. For an exclusive color you will have to pay more than 3,500 rubles, with a chrome insert or a strip of a different color around the perimeter - 4,000.

Types of internal linings

Vesta's threshold in the basic configuration requires protection. The choice of material depends on personal preferences and the appearance of the car.

Steel

Steel linings reliably protect the car and look stylish. The metallic design is more suitable for the Lada Cross, but the chrome shine of even the classic Vesta will give it a sporty appearance. Main characteristics of the product:

1. A stylish and reliable item that will last for many years.
2. Overhead fragments are produced with inscriptions or an engraved design.
3. Installation is carried out using double-sided tape or special glue.
4. Provides a high degree of protection against impacts, scratches and wear.

A steel part is often replaced not because it is broken, but because the lining loses its attractiveness. Cleaning and sanding will not help in this case.

The main disadvantage of steel is that dirt and abrasions are very visible.

Plastic

Plastic products are presented in the classic black version. For an additional fee, the element can be painted in the color of the car. The size of plastic accessories is larger than steel ones, they are wider and longer. Due to this, when opening the door, less dirt enters the interior. Dirt and scratches are not so visible, but this is where the advantages of plastic end. The replacement frequency is three times higher than that of steel.

How to install the overlay - instructions

Self-installation of protective products does not require knowledge or skills; the procedure itself is simple.

All protective products have 2-sided tape on the inside, which is necessary for fixation.

First, you need to thoroughly clean the metal surface of the threshold from dust contamination. It is recommended to degrease the surface with anti-silicone. Remove the protective film from the tape and carefully secure the cover. Your goal is to preserve the thresholds from damage, then use simple overlays. And for tuning it is better to use spectacular metal products with engraving.