Choosing wheels for the Lada Granta: tire and wheel sizes, bolt pattern, table

December 11, 2014 Lada.Online 802 245 292

Tire size is one of the most important parameters that can significantly change the behavior of a car on the road. In our review we will tell you about the permissible tire size on the Grant, as well as what the size of the tires affects during the operation of the car. Let's start with the tire and wheel sizes allowed by the manufacturer.

Standard Lada Granta wheel sizes

Depending on the vehicle's configuration, it may use tires and wheels of different diameters and widths. The year of manufacture of the car also plays an important role.

The first generation of Lada Granta was equipped with wheels with the following parameters:

Many people mistakenly perceive the letter R as a “radius”, but in fact, it only means the structure of the tire – radial. The numbers after the letter R are the diameter of the disc in inches.

Since 2022, the configurations have changed slightly. Now tires and wheels are installed in the following sizes:

These are all the standard sizes of tires and wheels that are installed on the Lada Granta from the factory.

Let's sum it up

As you can see, 15-inch wheels on the popular LADA Granta model are not associated with subsequent driving discomfort and do not provoke difficulties during the installation process. We recommend considering cast versions of products that have these advantages and are more accessible due to their moderate price factor.

Reading time: 7 minutes

One of the most modern creations of the AvtoVAZ concern is the Lada Granta car. The model first rolled off the assembly line in 2011 and is still in production. The number of cars sold in Russia and abroad is more than one hundred thousand - this indicates the popularity of the model among drivers, since its spectacular appearance, improved quality of all parts, increased engine life, as well as a relatively low price make it one of the most popular today . Of course, all related auto parts are widely represented on the market, and one of the main ones are wheel rims.

What are the maximum wheels you can put on a Grant?

It is worth noting that the permissible tire and wheel sizes must not be exceeded. It is not by chance that the manufacturer sets these restrictions.

First of all, a large wheel will touch the arch or fender liner and prevent the wheel from fully turning when cornering.

The second point is the huge load on the wheel bearings. The larger the diameter of the wheel and the more it weighs, the more the bearing is loaded. Eventually, it begins to hum due to wear and tear and fails.

The maximum wheel and tire size allowed by the manufacturer is as follows:

• 185/65 R15;
• 195/60 R15;
• 195/55 R16;
• 185/40R17.

Many car owners managed to replace the standard tires with size 205/70R16. This can only be done on a Lada Granta Cross and then with a lifted suspension. But this is nothing good for the car.

When replacing disks, it is important to install the appropriate bolts and observe the wheel bolt pattern of the Lada Granta - 4x98.

This list can be continued indefinitely. The fact is that the profile also affects the possible diameter. The smaller the tire profile, the larger the rim that can be installed on the car.

It is worth noting that Granta has the potential to install larger wheels. For this purpose, a special limiter was even provided on the standard steering rack, which prevents the wheels from touching the fender liners with a large turnout.

How can I find out about the disk parameters myself?

The technical passport of a particular car contains information not only about what factory wheels it has, but also contains instructions for installing them. If this useful guide is not nearby, then you can arm yourself with a ruler and visually determine the characteristics of interest.

If you need to choose 15-inch wheels, you must have knowledge regarding such parameters.

1. “ET” (offset) - denotes the numerical expression of the distance between two planes, or more precisely: the surface of contact with the hub and the vertical plane of symmetry of a particular product. The indicated value is intended to indicate how much the disk is able to “peek out” from under the wing. The parameter affects the degree of stability of the car. Typically, the numerical criterion for overhang starts at 40 mm.
2. “DIA” is the diameter of the hole that allows the wheel to fit onto the hub surface. When choosing a product, you should take into account the corresponding hub parameter. The measurement is carried out in millimeters.
3. Bolt pattern (in our version 4x98). The first number in the formula means the numerical composition of the fastening bolts, and the second is the diameter, on the line of which the centers of the holes for fasteners are located.
4. Disc width. This ordinary characteristic is usually expressed in inches. For LADA Granta the following values ​​are valid: 5; 5.5 and 6.

Armed with the above information, even an inexperienced owner will be able to select a suitable set of disks, thereby replacing the factory disks.

The next thing to consider might be the type of 15-inch wheels you plan to purchase. Let us remind you that these products are forged and cast (we do not take into account stamped ones). Here the main criterion will be the owner’s budget.

What tire pressure should be on Grant

In addition to the wheel size, it is also necessary to observe such a parameter as tire pressure. Do not forget that the pressure can be different and it accordingly affects the handling of the car and tire wear:

• Low pressure is dangerous when cornering. You can “take off” the wheel while driving. In addition, tire wear increases along the edges of the tread.
• High pressure - reduces the grip of the wheels on the road, increases the likelihood of a tire explosion, and tread wear increases in the middle.

Tire pressure should always be rated and depends on the vehicle load. Normal pressure is as follows:

• For R13 – 1.9 atm.
• For R14 and R15 – 2.0 atm.

When loading the car, you should increase the tire pressure to 2.1, 2.2, 2.3 in accordance with the weight of the load. This will help maintain tire traction and maintain efficiency.

How much do Tori disks cost?

The cost of K&K Torus discs depends on the radius of the disc itself. The larger the radius, the higher the price of Torus alloy wheels.

• R14 Torus price 2700-3000 rubles per piece
• R15 Torus price from 3500 to 4000 rubles per disk
• R16 Torus price from 4000 to 5000 rubles per disc
• R17 Torus price from 4500 to 5000 rubles per disk

Characteristics of Tori

Wheels R14-R15

• Number of mounting holes 4
• Hole diameter 98 mm
• Central hole diameter 58.5 mm
• Reach (ET) 35 mm

Is it worth increasing the Lada Granta track?

The track is the width between wheels located on the same axle. Increasing the track width allows the installation of wider wheels and improves vehicle handling, especially with a large suspension lift. But it’s clearly not worth increasing the track on Grant.

The track can be increased by using special spacers for the hub. Each car owner decides for himself whether to increase the track or not. But it’s worth knowing how this will affect other components of the car.

The fact is that the thicker the hub becomes and the thicker the wheel, the more the wheel bearing wears out. In addition, such tuning can negatively affect the drives. The grenades will be seriously loaded.

It is possible to carry out such tuning, but provided that a reinforced wheel hub is used, an appropriate bearing, and also paired with good drives.

Is it advisable to pay attention to alloy wheels?

Casting has long been popular, including 15-inch versions for LADA Granta. Compared to analogues, these products have several advantages:

• a lot of various offers on models and manufacturers;
• light weight, providing a slight increase in dynamic capabilities and reduced fuel consumption;
• more affordable cost compared to forged analogues;
• the use of corrosion-resistant alloys in the design, which allows the product to provide a decent service life.

How non-standard wheels can affect

Wheel parameters can affect vehicle handling and comfort. But it should be taken into account that the better the car’s handling, the worse this affects the comfort of the suspension.

The smaller the rubber profile and the larger the disc diameter, the better the Granta’s handling. In addition, fuel consumption increases, steering accuracy increases, but the noise of the tires and the vehicle's resistance to aquaplaning do not change. Of course, a large disc will negatively affect comfort.

Tire and wheel width can also affect handling, stability and increased tire wear. The width of the tires will also negatively affect the vehicle's resistance to hydroplaning, but can increase traction, provided the road surface is dry. Ideally, asphalt.

The width of the tires plays virtually no role in improving or deteriorating comfort.

A smaller rim means the use of rubber with a larger profile. Consequently, the wheels will be softer, which means increased comfort. But you need to understand that such a configuration does not fit in with improved handling.

Do not forget that the size of the disk can also affect the dynamic performance of the car. The manufacturer uses tire and wheel sizes at which speed and acceleration will be the highest, and the load on the engine and transmission will be minimal.

Deviation from these dimensions entails certain consequences - reduced dynamics, inaccurate speedometer readings and much more.

The width of the rims and their diameter can affect the suspension geometry. Therefore, after installing large wheels, it is necessary to do a wheel alignment.

"Lada Granta Sport" - wheel sizes and parameters

Car manufacturers were sensitive to the creation of original parts. The new Granta Sport wheels meet high quality requirements. New technologies, more durable materials are used, and there is complete conformity of dimensions for both new cars and early models.

Stock

The basic version is equipped with 16-inch silver-colored alloy wheels, which are treated with a special protective coating to avoid material corrosion and scratches from mechanical impact. The cost of original ones averages 14 thousand rubles. Knowing the article number (21905310101577), it’s easy to find suitable ones. An inexpensive alternative is to install stamps.

Basic equipment "Lada Granta Sport"

Characteristics of Granta Sport wheels for R16 tires from the factory:

• width – 195 mm;
• profile – 50%;
• radius - 16 inches.

These are installed by the manufacturer on all versions of the car (2016, 2022 and 2022).

Acceptable

If the owner is interested in a special style, then it is worth choosing wheels from third-party brands that supply wheels for the Lada Granta. Here everything is limited only by your imagination, the amount available and the size of the wheels. For Lada Granta Sport, wheels with a diameter of 15-17 inches are suitable, corresponding to DIA, PCD and ET. There are many options for tire width and profile. It is possible to put wheels on R14 tires, but the Granta looks unaesthetic on them. Therefore, if you need a spectacular appearance of the car, then you should not install wheels with a diameter of 14 inches.

Painting the part in a different color will also help make the car stand out on the road.

The legendary “Rails” look very good on cars of the LADA family.