High-quality and complete modification of Kirzhach headlights on a VAZ 2110


Replacing headlights for a VAZ 2110 is a relatively common occurrence. This is usually due to one of the following reasons:
  • mechanical damage to headlights;
  • breakdown of old lighting system components;
  • desire to change the appearance of the car.


Headlight for the VAZ 2110
The choice of headlights for the VAZ 2110 is small - there are 2 types of lighting system components for it:

  • components from the German company Bosch;
  • components from the Russian one in the city of Kirzhach (“the popular” name is simply Kirzhach).

It would seem that in terms of quality comparison, the domestic analogue should lose to the German one. However, due to its features, many car enthusiasts, despite the price, choose “Kirzhach” for their 2110 car model.

The lighting complex from the Russian company consists of:

  • glass;
  • reflector;
  • hydrocorrector;
  • lenses;
  • curtains;
  • lamps;
  • various fasteners (screws, springs for hydraulic corrector).


Headlight lighting "Kirzhach"

Model features

Experts assessed possible headlight options for VAZ according to several parameters:

  • ensuring excellent visibility at night. At the same time, the light should not blind oncoming drivers. In this parameter, both Kirzhach and Bosch are approximately the same;
  • features of reflectors. The German analogue of the headlight has reflectors for low and high beam, while the domestic one has a lens for low beam and a reflector for high beam. This ensured almost the same level of illumination during the tests. The lens, which is installed in the headlights of the Russian manufacturer, provides better brightness (helps create clear lines of light, and is also suitable for installing xenon optics). In addition, some drivers note that the illumination is not very high-quality when the low-beam headlights are on; the product, due to the reduced lighting area, does not have such a drawback.


Differences between the “Kirzhach” headlights
Another feature of the “Kirzhach” headlights is that you can easily buy it in stores in the city, because the sales market for such headlights is in Russia. This and other features of the headlight make it more attractive to VAZ 2110 drivers and determine a slightly higher price for components from this company.

Sometimes it happens that, having purchased new headlights from a Russian one for your VAZ, you notice that their glow is not very good. Inexperienced drivers may attribute this to a defect or poor quality of the purchased product.

However, most often the problem is in the usual setting of the headlights. It is advisable to adjust the new lighting components that you install in place of the optics you just removed.

To do this, you will need, in addition to the skill of a draftsman, a flat surface. But if you do not have the necessary skills and time, entrust the adjustment of the Kirzhach headlights to specialists.


Removing a headlight from a VAZ 2110

Replacing headlight bulbs

The owners' complaints about the lighting of this car mainly relate to electric lamps. An effective replacement can be found if you find and install devices that generate a luminous flux that has increased brightness and intensity. Manufacturers of these devices, both domestic and foreign, have mastered several types of such products:

  • Halogen lamps. They are distinguished by a large selection of their sizes and a long period of operation, as well as reasonable cost. As a disadvantage, it is necessary to note their high energy consumption, as well as some features of their installation;
  • Xenon lamps. This type of lamp has a high light beam intensity, is environmentally safe, and has a pleasant spectrum close to daylight. However, due to the high likelihood of blinding problems for drivers of oncoming cars, they were prohibited from use;
  • "GT" type of lamps. They are classified as a new type of lighting devices; they embody all the best factors of previously produced devices, and therefore are very popular.

Article on the topic: “Which is better xenon or halogen.”

Headlight modernization

Despite the slightly higher performance indicators for the 2110 model, many car enthusiasts want to improve its equipment. The improvement requires disassembling the headlights, which occurs as follows:

  • Remove the glass from the headlight, which is attached using sealant. Use the utility knife;
  • remove the reflector. To do this you will have to unscrew a few bolts;
  • on the back side of the headlight, remove all the wires, as well as the spring that secures the hydraulic corrector;
  • remove the module from the headlight by pulling it towards you.

The most popular ways to improve headlights on a VAZ 2110 are:

  • shifting the lens closer to the reflector. This is done to reduce the area of ​​the lens on which the light stream is located, which avoids dazzling drivers who are driving in front (through their rear-view windows);
  • modernization of curtains. Provides better light distribution;
  • changing the shape of the reflector. This is done to change the width of the light stream. Since the reflector is made of sheet metal, it can easily be given, for example, an oval shape;
  • adjusting the light flow. It can be done by tightening several screws on the headlight housing, which will change the angle of inclination of the optics of your car and its horizontal and vertical location.

Tips for improving lighting on a VAZ-2110

The history of the VAZ 2110 brand is very interesting and fascinating. This car can easily be called one of the most popular on the domestic market. And you shouldn’t be surprised, because the car is inexpensive and completely unpretentious to use. At the same time, many owners of “ten” complain about their light. In this situation, you should know that this problem can be easily corrected by at the same time slightly modernizing your car. To do this you need:

  1. Wash the headlights. Often it is the adhering dirt that is the main reason for the deterioration of lighting. If you do not have the opportunity or simply do not want to always wipe the headlights yourself, then you can install washers. The factory version of the car is not supplemented with this function. Volga washers are well suited for the “ten”. To install them, remove the bumper, make the appropriate holes, then insert the washer modules there and tighten them tightly with the bolts. Next, you need to connect the hose to the washer reservoir. Be sure to connect a button in the cabin that controls the washer. It should only be connected via a fuse.
  2. Next, carefully examine whether the headlight glass is intact. It is possible that it is cracked. In this case, you need to install a new one. To do this, remove the headlight unit, but before doing this, disconnect the negative terminal from the battery. Next, wash the headlight. Afterwards, you can take a hair dryer and, using it, heat the edge of the glass in a circular and smooth motion to soften the sealant. Then pry up the glass and remove it. Old sealant must be removed from the case and glass. After degreasing the body and edge of the glass, apply a layer of sealant to it. The glass should then be carefully pressed against the body.
  3. If the old reflector has peeled off, it can be replaced. To do this, you must first remove the glass from the case. Next you need to unscrew and remove the light bulb. Remove the reflector to be replaced, install a new one and reassemble the headlight in reverse order.
  4. You can also replace the “original” light bulbs with halogen ones. They will shine much brighter. Cost-effectiveness and durability are their main characteristics. However, in addition to halogen devices, you can also install xenon. Similar lamps come in different wattages, and the subsequent brightness of the glow depends on this. You only need to install bulbs that have been recommended for use on a specific car.

What to choose?

It would seem that we are talking about German quality products, which by definition should be better than their domestic counterpart. But in reality things are somewhat different.

Let's look at the key features of Kirzhach and Bosch headlights to determine which ones you should choose for your VAZ 2110 model.

  1. The purpose of any low beam is to provide good visibility of the roadway at night, while at the same time avoiding dazzling oncoming traffic. Headlights from German and domestic manufacturers cope equally well with these functions.
  2. The headlights from Kirzhach have a low beam lens, and a reflector is provided for the high beam. German products have two reflectors - for low beam and high beam. The lighting is ultimately the same, but Bosch has better brightness.
  3. Lenses are actually better than reflectors. They create a clearer line of light and allow the installation of xenon optics.
  4. As a study of reviews of VAZ 2110 owners using German devices shows, they are characterized by worse illumination in low beam mode.
  5. Bosch headlights have a very important advantage for many - when the car is driving in cloudy and rainy weather, it provides a better quality glow compared to Kirzhach devices. It's all about the larger surface of the low beam reflector.
  6. This Bosch plus also comes with a minus - you are deprived of the opportunity to install xenon optics.
  7. Note that, regardless of the manufacturer, these headlights contain H1 format lamps.
  8. If we take into account all other characteristics, then the undisputed leader here will be the products of the domestic manufacturer.

It is noteworthy that this is one of the few exceptions when domestic products turned out to be better than foreign ones. Sad but true.

Suggested options


Left headlight Kirzhach on VAZ 2110

Not all motorists know which headlight unit is provided on the VAZ 2110. But in fact, there are 2 options:

  • Domestic Kirzhach headlights for VAZ 2110;
  • Foreign Bosch headlights for VAZ 2110 (manufacturer - Germany).

As for the cost, a kit from Bosch will cost about 2.2-2.4 thousand rubles, but Kirzhach is more expensive - from 2.5 to 2.8 thousand rubles. And this despite the fact that we are talking about a domestic manufacturer.

Disassembling headlights

Before you start modifying the headlights in a VAZ 2110 car, you need to perform the following simple steps:

  • Their removal and disassembly. Using a utility knife, the glass is carefully removed from the headlight, and since it is secured using a special sealant, extreme caution is required so as not to break it. But if it breaks, then this is not a problem, you can buy it separately;
  • Next, the reflector is removed, unscrewing several bolts.
  • The next step is to remove all the wires from the back of the headlight and the spring from the place where the hydraulic corrector is inserted, and only then is it possible to remove the frame with the module itself from the headlight housing.
  • Remove the low beam module using a screwdriver and disassemble it completely.

Finalization

In order to make the glow better, they are refined, which includes the following steps:

  • Shifting the lens closer to the reflector;
  • Modernization of curtains;
  • Changing the shape of the reflector.

These are the main stages that will ultimately lead to the complete modernization of Kirzhach headlights on a VAZ 2110 car. Now it is necessary to consider each individual stage.

Lens in the headlight of Kirzhach VAZ 2110

Shifting the lens closer to the reflector

The alteration begins with shifting the lens to reduce the area of ​​the lens onto which the light flux falls. As a result, the curvature of the lens will also become smaller.

  1. Disassembling the module and removing the lens from it. Carefully mark the cut at the intended location of the module. It is imperative to ensure that the lens curtain does not move from its place, but remains at a distance of 50 mm due to the focal length of the lens;
  2. Cut off the lens at the marked location and attach it to the module. It is attached using the cuts that were made earlier, but the module itself will become shorter. The main thing in all this is that the closer the lens is, the more heating will occur due to its small area. In order not to miss the distance, the most optimal would be to approximate the lens by 10 mm.

Carrying out modernization of curtains

To carry out modernization and modification at the highest level, good and high-quality light distribution is done. The curtain is made straighter so that the light does not blind passing drivers driving in front of the VAZ 2110 into the rear mirrors. This type of curtain was developed according to the European GOST standard and is very successful.

To do this, you will need cardboard from which the curtain template will be made. The prepared cardboard template is transferred to a plate of metal material. To cut it out, metal scissors are used and the finished curtain is attached to the module. Also, if desired, it can be wrapped in foil to provide better light dispersion; it can also be used to install fog lights.

Under the lens on the module body, the edges are cut off. If they are cut correctly (no more than one millimeter along the ring), then the edge of the ring will not interfere with the correct flow of light.

We install “foglights” with our own hands

Fog lights are a very useful attribute of every car when you need to drive in bad weather conditions. These headlights on the presented model are provided in the “Lux” configuration. As a result, their installation falls entirely on the shoulders of the car owner.

First, decide where on the machine you want to install them. The best option is the bottom of the bumper. There are holes here where they will fit perfectly. Next, you should choose their type: with transparent or corrugated glass. The first ones shine with spots, so it is better to refuse them. The second option perfectly diffuses light, illuminating the entire surface of the road. Next, you need to purchase frames for them, a set of wires, a relay and a power button. Route the wires that are located in the dashboard directly into the engine compartment. Connect the wires to the connectors on the headlights and insulate them well with electrical tape. Next, install the headlights in the frames and secure them firmly in the appropriate place on the bumper. Connect the wires. If you need the headlights to be turned on from a button, then you need to install it in the gap of the corresponding power wire. When the work is completed, adjust the headlights.

Adjusting the luminous flux

In order for the VAZ 2110 to be driven comfortably, all the rules of correct light supply must be followed so as not to blind oncoming drivers. There are special screws on the headlamp housing that are used to adjust the light supply.

When you turn the left screw, the angle of inclination of the optics changes vertically, respectively, turning the right screw changes the optics horizontally.

To correctly set the luminous flux, a horizontal line is drawn from the ground to the center of the headlights and another similar horizontal line is drawn 65 cm below it. After all the preparation has been completed, you can proceed directly to the adjustment:

  • the right headlight of the car is covered with cardboard paper and the low beam is turned on;
  • Using the adjusting screws, the center of the light beam of the left headlight is set, which is done in the same way with the right one.

A few words about tuning tricks

Activities to modernize the head lighting of the “tens”, giving it uniqueness and inimitability, may require the purchase of some special materials, such as phosphor. Its unique properties are close to those of phosphorus, which has the ability to emit light in the dark.

This feature is widely used to obtain original tuning options. Most often, headlight curtains are coated with a pre-prepared mixture, which consists of phosphor and varnish. This needs to be done on both sides of the curtains, and after drying them, you can put them in place. Such actions allow you to get a completely new and unique look. As you can see from the story, tuning VAZ 2110 headlights with your own hands is not difficult. Carefully consider the design of the upcoming renovation, prepare the materials necessary for the work, and get to work.

How to improve headlights on a VAZ without the help of others2110

There is no such person who realizes that the safety of not only the driver and passengers, but also pedestrians and oncoming cars depends on the correct selection of the studio, how the headlights are set in any car, including the VAZ-2110. Adjusting the light is quite easy if you follow the advice of professionals and do this step by step. How to make the headlights on a VAZ-2110 better in just a few hours without the help of others, we will then try to analyze.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]